Description du projet DEENESFRITPL De nouvelles solutions pour le traitement de fin de vie des matériaux biocomposites Dans le cadre des efforts pour impulser la transition vers une économie circulaire, la récupération de produits joue un rôle de plus en plus important. Le projet ELIOT, financé par l’UE, entend fournir de nouvelles technologies écologiques pour la fin de vie de fibres naturelles fréquemment utilisées et de résines biosourcées, ainsi qu’inscrire pleinement ces biomatériaux dans les principes de l’économie circulaire. Il développera donc des solutions innovantes pour la fin de vie de la nouvelle génération de biocomposites. Différentes méthodes de fin de vie pour la récupération et le recyclage de déchets seront évaluées du point de vue du coût et de la durabilité environnementale. En apportant des méthodes rentables pour le traitement de fin de vie des matériaux biocomposites, le projet posera les bases pour leur adoption généralisée dans l’industrie aéronautique et d’autres secteurs industriels. Afficher les objectifs du projet Masquer les objectifs du projet Objectif ELIOT aims to provide new innovative and green technologies for EoL of commonly used natural fibres and biobased resins with increased resource efficiency and fully align these biomaterials with the circular economy principles (Figure 1). To this end, the project will propose and develop innovative solutions for the EoL of the new generation of biocomposites by: (1) reviewing the current treatment technologies for conventional FRP composite waste; (2) evaluating their potential suitability to be applied to the biocomposite waste and selecting those treatment alternatives that appear as the most feasible; (4) tailoring the selected treatment technologies to the characteristics of biocomposites and testing them at laboratory scale; and (5) demonstrating their technical feasibility and life-cycle sustainability under pre-industrial scale. Different EoL approaches will be evaluated, including mechanical, thermal, chemical and biological methods for waste recovery and recycling. A comparison of the advantages and disadvantages of the EoL methods in terms of cost and environmental sustainability will be conducted.ELIOT will set the basis for a wider uptake of biocomposite materials in the aircraft industry (and other industrial sectors using composite materials) by providing cost-effective methods for their EoL treatment. Main technical objective to be achieved by the consortium in this project is the full-scale demonstration of the most promising EoL methods for biocomposite waste. Full-scale demonstration will be provided for at least 2 EoL methods for 2 target biocomposites, respectively, including their technical validation at pre-industrial scale and their validation in terms ng, flooring and sidewall panels in cabin interiors) leads to net environmental benefits and cost savings throughout their whole life cycle; i.e. not only during production and use of the materials but also by means of sustainable EoL alternatives suitable to close the loop of biomaterials. Champ scientifique engineering and technologyenvironmental engineeringwaste managementwaste treatment processesrecyclingengineering and technologymaterials engineeringcompositesbiocompositesengineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraftengineering and technologyindustrial biotechnologybiomaterialssocial scienceseconomics and businesseconomicssustainable economy Mots‑clés biomateriales end-of-life green technologies life cycle assessment mechanical methods thermal methods chemical methods biological methods Programme(s) H2020-EU.3.4. - SOCIETAL CHALLENGES - Smart, Green And Integrated Transport Main Programme H2020-EU.3.4.5.4. - ITD Airframe Thème(s) JTI-CS2-2019-CFP10-AIR-03-07 - End of Life (EoL) for biomaterials Appel à propositions H2020-CS2-CFP10-2019-01 Voir d’autres projets de cet appel Régime de financement RIA - Research and Innovation action Coordinateur AIMPLAS - ASOCIACION DE INVESTIGACION DE MATERIALES PLASTICOS Y CONEXAS Contribution nette de l'UE € 186 231,25 Adresse VALENCIA PARC TECHNOLOGIC CALLE GUSTAVE EIFFEL 4 46980 PATERNA VALENCIA Espagne Voir sur la carte PME L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention. Oui Région Este Comunitat Valenciana Valencia/València Type d’activité Research Organisations Liens Contacter l’organisation Opens in new window Site web Opens in new window Participation aux programmes de R&I de l'UE Opens in new window Réseau de collaboration HORIZON Opens in new window Coût total € 186 231,25 Participants (1) Trier par ordre alphabétique Trier par contribution nette de l'UE Tout développer Tout réduire NEDERLANDSE ORGANISATIE VOOR TOEGEPAST NATUURWETENSCHAPPELIJK ONDERZOEK TNO Pays-Bas Contribution nette de l'UE € 163 466,25 Adresse ANNA VAN BUERENPLEIN 1 2595 DA Den Haag Voir sur la carte Région West-Nederland Zuid-Holland Agglomeratie ’s-Gravenhage Type d’activité Research Organisations Liens Contacter l’organisation Opens in new window Site web Opens in new window Participation aux programmes de R&I de l'UE Opens in new window Réseau de collaboration HORIZON Opens in new window Coût total € 163 466,25