AIRFRAME ITD

Resultado final

2022 D&C plan update

Dissemination and Communication Plan updated for 2022

2020 D&C plan update

Dissemination and Communication Plan updated for 2020

2021 D&C plan update

Dissemination and Communication Plan updated for 2021

2023 D&C plan update

Dissemination and Communication Plan updated for 2023

Publicaciones

Impact Of Upstream Wake On Boundary Layer Regime: From Modal To Bypass Transition

Autores: G. Delattre, J-Oh. Brazier, M. Forte, L. Pascal
Publicado en: Fluid Dynamics: Stability & Transition, 2018
Editor: AIAA
DOI: 10.2514/6.2018-3387

Design of a Morphing Leading Edge for use as a High Lift Device for a Regional Aircraft

Autores: Volker Landersheim, Conchin Contell Asins, Jens-David Wacker, Seiji Adachi, Sonja Arnold-Keifer, Michael May
Publicado en: IOP Conference Series: Materials Science and Engineering, 2021
Editor: IOP Publishing Ltd
DOI: 10.1088/1757-899x/1024/1/012033

Sustainability-oriented topology optimization of aircraft components and best practices in LPBF-based metal additive manufacturing

Autores: Klaus Hoschke, Konstantin Kappe, Sankalp Patil, Aron Pfaff, Michael May, Jens Osterholz
Publicado en: 2022
Editor: 3AF

OPTICAL FIBRE BRAGG GRATING SENSORS FOR BVID DETECTION ON COMPOSITE SUB-COMPONENTS

Autores: S. Goossens, T. Geernaert, K. Muñoz, M. Jiménez, E. Karachalios, D. Saenz-Castillo, F. Berghmans
Publicado en: 3AF Aerospace Europe Conference 2020, Edición 25-28/02/2020, 2020
Editor: 3AF

Multidimensional Design Assessment Model for eco-efficiency and efficiency in aeronautical assembly processes

Autores: E.J. Lourenco, M. Oliva, M.A. Estrela, A. J. Baptista
Publicado en: 2019 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC), Edición 17-19/06 2019, 2019, Página(s) 1-9, ISBN 978-1-7281-3401-7
Editor: IEEE
DOI: 10.1109/ice.2019.8792641

Analysis and Uncertainty Quantification of a Hybrid Laminar Flow Control System

Autores: Alexander Barklage, Ulrich Römer ORCID Icon, Anna Bertram, Philipp Bekemeyer, Jan Himisch, Rolf Radespiel and Camli Badrya
Publicado en: 2022
Editor: AIAA
DOI: 10.2514/6.2022-2452

Numerical Studies on the Influence of Step-Like Surface Irregularities on the Development of Tollmien-Schlichting Waves

Autores: A. Franco, S. Hein
Publicado en: IUTAM Laminar-Turbulent Transition. IUTAM Bookseries, 2021
Editor: Springer, Sherwin S., Schmid P., Wu X. (eds)
DOI: 10.1007/978-3-030-67902-6_64

Numerical Studies on the Influence of Step-Like Surface Irregularities on the Development of Tollmien-Schlichting Waves

Autores: Juan Alberto Franco, Stefan Hein
Publicado en: IUTAM Symposium on Laminar-Turbulent Transition, 2019
Editor: International Union of Theoretical and Applied Mechanics

Defining the Potential of Extended Reality Tools for Implementing Co-creation of User Oriented Products and Systems

Autores: Santhosh; De Crescenzio; Vitolo
Publicado en: Design Tools and Methods in Industrial Engineering II. ADM 2021. Lecture Notes in Mechanical Engineering., 2022, Página(s) 165-174, ISBN 978-3-030-91233-8
Editor: Springer Nature
DOI: 10.1007/978-3-030-91234-5_17

Challenges of complex monitoring of the curing parameters in coupons for LRI manufacturing

Autores: A. Torre-Poza, A. M. R. Pinto, T. Grandal, N. González-Castro, L. Carral, E. Rodríguez-Senín
Publicado en: INCAS BULLETIN, Volume 13, Edición 1/ 2021, 2021
Editor: INCAS – National Institute for Aerospace Research “Elie Carafoli”
DOI: 10.13111/2066-8201.2021.13.1.21

High-rate in-plane shear testing of CFRP using the Split Hopkinson Tension Bar

Autores: Noah Ledford, Mathieu Imbert, Michael May
Publicado en: 2021 AIAA SciTech Forum and Exposition, 2021
Editor: AIAA
DOI: 10.2514/6.2021-0167

A structured approach for input derivative index-1 descriptor dynamical model control

Autores: Ch. Poussot-Vassal, P. Vuillemin & D. Quero
Publicado en: European Control Conference, 2019, ISSN 2226-4310
Editor: ecc

Large-Sclae Wind Tunnel Testing of an Advanced Hybrid Laminar Flow Control System

Autores: Peter Scholz, Alexander Barklage, Bart van Rooijen, Arne Seitz, Matthias Horn, Camli Badrya, Rolf Radespiel
Publicado en: German Aeorospace Conference, 2022
Editor: Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V.
DOI: 10.25967/570065

Lightning Low Level vs High Level Direct Current Injection Tests on a Full Scale Aircraft Cockpit

Autores: Fernando Cano Perez, Guadalupe Gutierrez Gutierrez, Hugo Tavares, Abderrahim Khamlichi, Josefina Menendez Alberquilla, Raul Molero Castejon, Nelson Matos, Angel Ramirez Linares
Publicado en: 2019 International Symposium on Electromagnetic Compatibility - EMC EUROPE, Edición 2-6 Sept. 2019, 2019, Página(s) 644-649, ISBN 978-1-7281-0594-9
Editor: IEEE
DOI: 10.1109/emceurope.2019.8871458

THE RACER: MANUFACTURING AND TESTING

Autores: Axel Fink, axel.fink@airbus.com, AIRBUS Helicopters (Germany) Martin Blacha, martin.blacha@airbus.com, AIRBUS Helicopters (Germany) Richard Miles,
Publicado en: 47th European Rotorcraft Forum,, 2021
Editor: ERF

An Evolution- Based High-Cycle Fatigue Constraint in Topology Optimization

Autores: S Suresh, S B Lindström, C-J Thore, B Torstenfelt, A Klarbring
Publicado en: Proceedings of the 6th International Conference on Engineering Optimization, 2018
Editor: Springer
DOI: 10.1007/978-3-319-97773-7_73

Uncertainty analysis of the laminar boundary layer control TSSD concept

Autores: Alexander Barklage, Ulrich Römer, Arne Seitz, Matthias Horn, Rolf Radespiel, Peter Scholz and Camli Badrya
Publicado en: 2022
Editor: AIAA
DOI: 10.2514/6.2022-3551

CFD Wind Tunnel Assessment on the case study of the MOTHIF Blown Flap CFD Wind Tunnel Assessment on the case study of the MOTHIF Blown Flap

Autores: P. D'Alesio; G. Travostino; P. Planquart; G. Glabeke
Publicado en: 11th EASN Conference, 2021
Editor: EASN

AN AUTOMATED ASSESSEMENT TOOL OF NLF CRITERIA FOR AIRFRAME JOINTS

Autores: Sascha Dähne, Olaf Steffen, Jens Kosmann, Christian Hühne
Publicado en: 2022
Editor: DGLR Deutsche Gesellschaft für Luft- und Raumfahrt

Barely visible impact damage detection and location on composite materials by surface mounted and embedded aerospace-compatible optical fibre Bragg grating sensors

Autores: Sidney Goossens, Thomas Geernaert, Zahra Sharif Khodaei, Evangelos Karachalios, Diego Saenz-Castillo, Francis Berghmans
Publicado en: SPIE Photonics Europe 2020, Edición 29/03/2020 - 03/04/2020, 2020
Editor: SPIE
DOI: 10.1117/12.2559262

Design of a composite aircraft nose wheel for a regional aircraft

Autores: Jens-David Wacker, Dominik Laveuve, Conchin Contell Asins, Andreas Büter
Publicado en: IOP Conference Series: Materials Science and Engineering, Edición March 2021, 2020
Editor: IOP Publishing Ltd

SPATIAL SOUND SYSTEM TO AID INTERACTIVITY IN A HUMAN CENTRED DESIGN EVALUATION OF AN AIRCRAFT CABIN ENVIRONMENT.

Autores: Sandhya Santhosh , Martino C. Moruzzi, Francesca De Crescenzio, Sara Bagassi
Publicado en: XXVI AIDAA International Congress August 31st -September 3rd 2021 Proceedings, 2021, ISBN 9791259560421
Editor: Casa Editrice Paolo Emilio Persiani

Flat inkjet-printed copper induction coils for magnetostrictive structural health monitoring: A comparison with bulk air coils and an anisotropic magnetoresistive sensor (AMR) sensor

Autores: Gullapalli A, Beedasy V, Vincent JDS, Leong Z, Smith P, Morley N
Publicado en: Advanced Engineering Materials, 2021, ISSN 1438-1656
Editor: John Wiley & Sons Ltd.
DOI: 10.1002/adem.202100313

Effect of scent on comfort of aircraft passengers

Autores: Xinhe Yao, Yu Song and Peter Vink
Publicado en: Work, 2021, ISSN 2078-2489
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3233/wor-208025

Analysis and Uncertainty Quantification of a Hybrid Laminar Flow Control System

Autores: Alexander Barklage, Ulrich Römer ORCID Icon, Anna Bertram, Philipp Bekemeyer, Jan Himisch, Rolf Radespiel and Camli Badrya
Publicado en: AIAA Journal, 2022, ISSN 0001-1452
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/1.j061745

The Effect of Post-Processing on the Mechanical Behavior of Ti6Al4V Manufactured by Electron Beam Powder Bed Fusion for General Aviation Primary Structural Applications

Autores: Carmine Pirozzi, Stefania Franchitti, Rosario Borrelli, Antonio Chiariello, Luigi Di Palma
Publicado en: Aerospace, Edición 7/6, 2020, Página(s) 75, ISSN 2226-4310
Editor: MDPI
DOI: 10.3390/aerospace7060075

Towards exceptional icephobicity with chionophile-inspired durable biomimetic coatings

Autores: Halar Memon, Davide S.A. De Focatiis, Kwing-So Choi, and Xianghui Hou
Publicado en: ACS Applied Polymer Materials, 2021, ISSN 2637-6105
Editor: ACS
DOI: 10.1021/acsapm.1c00623

Effect of some riveting process parameters on the fatigue life of double-shear lap joints

Autores: Jan Papuga, Jiří Stejskal
Publicado en: ScienceDirect.com, 2021, ISSN 1880-3989
Editor: elsevier.com
DOI: 10.1016/j.engfailanal.2021.106008

Fatigue crack growth for through and part-through cracks in additively manufactured Ti6Al4V

Autores: M. Kahlin, H. Ansell, J. Moverare
Publicado en: International Journal of Fatigue, 2021, ISSN 0142-1123
Editor: Elsevier BV
DOI: 10.1016/j.ijfatigue.2021.106608

Experimental investigation of damage detection on structures with friction stir welding (FSW) junctions

Autores: A Sorrentino, A Chiariello, L Di Palma, A De Fenza
Publicado en: IOP Conference Series: Materials Science and Engineering, Edición 1024/1, 2021, Página(s) 012031, ISSN 1757-8981
Editor: IOP Publishing Ltd
DOI: 10.1088/1757-899x/1024/1/012031

PREDICTIVE CAPACITY OF FDTD METHOD EMBEDDING MTLN TECHNIQUE FOR LIGHTNING AND HIRF THREATS

Autores: Guadalupe Gutierrez Gutierrez, Tim McDonald, Carlos Rodriguez Paños, Raul Molero Castejon, Hugo Tavares, Hirahi Galindo Perez, Enrique Pascual-Gil
Publicado en: Progress In Electromagnetics Research C, Edición 107, 2021, Página(s) 33-47, ISSN 1937-8718
Editor: EMW Publishing
DOI: 10.2528/pierc20092006

Effects of reactive and non-reactive tackifying agents on mechanical neat resin and composite performance for preforming processes and Liquid Resin Infusion (LRI) techniques

Autores: Helber, Florian; Carosella, Stefan; Middendorf, Peter
Publicado en: Advanced Manufacturing: Polymer & Composites Science, 2023, ISSN 2155-4277
Editor: Taylor & Francis Online
DOI: 10.1080/20550340.2023.2205796

Natural laminar flow leading edge: Requirements, design, and experimental validation under operational loads

Autores: Olaf Steffen, Patrick Meyer, Prf. Dr. Ing. Christian Hühne
Publicado en: Aerospace Science and Technology, 2024, ISSN 0263-8223
Editor: Elsevier BV
DOI: 10.1016/j.ast.2024.108913

Sustainable scrapping method of thermoplastic composite materials

Autores: Rocio Ruiz
Publicado en: Journal of Physics: Conference Series, 2023, ISSN 1742-6596
Editor: IOP Publishing
DOI: 10.1088/1742-6596/2526/1/012052

On the Relationship between Lightning Strike Parameters and Measured Free Surface Velocities in Artificial Lightning Strike Tests on Composite Panels

Autores: Michael May, Sebastian Schopferer
Publicado en: Journal of Composites Science, 2023, ISSN 2078-2489
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/jcs7070268

Aircraft interior and seat design: priorities based on passengers’ opinions

Autores: Vink, P., Vledder, G., Song, Y., Herbig, B., Reichherzer, A. S., & Mansfield, N.
Publicado en: International Journal of Aviation, Aeronautics, and Aerospace, 2022, ISSN 2374-6793
Editor: n/a

Model validation for a transient ECS failure case in a business jet mock-up

Autores: A.J. M.Lindner, M. Pschirer and V. Norrefeldt
Publicado en: IOP Conference, 2022, ISSN 1757-899X
Editor: IOP Conference
DOI: 10.1088/1757-899x/1226/1/012110

Implementation of dimensional management methodology and optimisation algorithms for pre-drilled hinge line interfaces of critical aero assemblies – A case study

Autores: Konstantinos C Bacharoudis, David Bainbridge, Alison Turner, Atanas A Popov, Svetan M Ratchev
Publicado en: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Edición Edición 14, December 2020, 2020, Página(s) 095440542097810, ISSN 0954-4054
Editor: Professional Engineering Publishing Ltd.
DOI: 10.1177/0954405420978101

Role of surface finishing and interfacial lacquer layer on particle erosion mechanisms of Ti/TiN multilayer PVD coatings for carbon fibre reinforced polymer substrates protection

Autores: Borja Coto, Lucía Mendizabal, Francesco Pagano, Hans Kling, Itziar Azpitarte, Javier Barriga, Linnea Selegård
Publicado en: Materials Letters, Edición 285, 2021, Página(s) 129187, ISSN 0167-577X
Editor: Elsevier BV
DOI: 10.1016/j.matlet.2020.129187

Spectral Verification of the Mechanisms behind FBG-Based Ultrasonic Guided Wave Detection

Autores: Sidney Goossens, Francis Berghmans, Thomas Geernaert
Publicado en: Sensors, Edición 20/22, 2020, Página(s) 6571, ISSN 1424-8220
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s20226571

Novel multi-zone self-heated composites tool for out-of-autoclave aerospace components manufacturing

Autores: Nithin Jayasree, Sadik Omairey and Mihalis Kazilas
Publicado en: Science and Engineering of Composite Materials, Edición Volume 27: Edición 1, 2020, Página(s) 325–334, ISSN 2191-0359
Editor: De Gruyter
DOI: 10.1515/secm-2020-0033

High-rate in-plane shear testing of IM7/8552 using the Split Hopkinson Tension Bar

Autores: Noah Ledford, Mathieu Imbert, Michael May
Publicado en: AIAA Journal, 2021, ISSN 1533-385X
Editor: AIAA
DOI: 10.2514/1.j060269

Comparative study on the influence of surface characteristics on de-icing evaluation

Autores: Xianghui Hou
Publicado en: Journal of Materials Science, 2021, ISSN 1573-4803
Editor: Springer
DOI: 10.1007/s10853-021-06407-x

Flame retardant investigations on carbon fibre-reinforced polyurethane resin parts for aircraft applications produced by wet compression moulding

Autores: Carl-Christoph Höhne
Publicado en: Fire and Materials, 2021, ISSN 1097-0037
Editor: Willey
DOI: 10.1002/fam.2965

Experimental investigation of hail impacts over a wide range of high velocities

Autores: Mathieu Imbert, Sebastian Kilchert, Michael Maurer, Michael May
Publicado en: International Journal of Impact Engineering, 2023, ISSN 1875-6670
Editor: Elsevier
DOI: 10.1016/j.ijimpeng.2023.104627

Digital Clone Testing Platform for the Assessment of SHM Systems under Uncertainty

Autores: I. N. Giannakeas, Z. Sharif Khodaei and M.H. Aliabadi
Publicado en: Mechanical Systems and Signal Processing, 2022, ISSN 1687-8140
Editor: ELSEVIER
DOI: 10.1016/j.ymssp.2021.108150

New EoL Routes of Al-Li Aircraft Integral LBW and FSW Welded Panels including New Cr-Free Coatings

Autores: Clara Delgado
Publicado en: Crystals, 2023, ISSN 2078-2489
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/cryst13050807

Effects of hot-wet storage aging, CNT-integration and damping layer interposition on static and fatigue interlaminar shear response of a UD Graphite/Epoxy material system

Autores: Theofanis S. Plagianakos, Kirsa Muñoz, Stylianos Strapatsakis, Maria del Mar Fernandez, Miguel Jimenez, Evangelos Karachalios
Publicado en: Materials Today Communications, Edición 25, 2020, Página(s) 101296, ISSN 2352-4928
Editor: Elsevier BV
DOI: 10.1016/j.mtcomm.2020.101296

PCQ: Preferred Comfort Questionnaires for product design

Autores: Shabila Anjania, Manon Kühne, Alessandro Naddeo, Susanne Frohriep, Neil Mansfield, Yu Song and Peter Vink
Publicado en: Boletín de Observación Tecnológica en Defensa, 2021, ISSN 1875-9270
Editor: IOS Press
DOI: 10.3233/wor-208002

Acoustic Improvements of Aircraft Headrests Based on Electrospun Mats Evaluated Through Boundary Element Method

Autores: Venanzio Giannella, Francesco Branda, Jessica Passaro, Giuseppe Petrone, Mattia Barbarino, Roberto Citarella
Publicado en: Applied Sciences, Edición 10/16, 2020, Página(s) 5712, ISSN 2076-3417
Editor: MDPI
DOI: 10.3390/app10165712

Fatigue behaviour of notched additive manufactured Ti6Al4V with as-built surfaces

Autores: M. Kahlin, H. Ansell, J.J. Moverare
Publicado en: International Journal of Fatigue, 2017, ISSN 0142-1123
Editor: Elsevier BV
DOI: 10.1016/j.ijfatigue.2017.04.009

The application of thin-walled integral constructions in aviation as exemplified by the SAT-AM project

Autores: Paweł Bałon, Andrzej Świątoniowski, Bartłomiej Kiełbasa, Edward Rejman, Janusz Szostak, Robert Smusz and Łukasz Kowalski
Publicado en: MATEC Web of Conference, 2019, ISSN 2261-236X
Editor: MATEC Web Conf.
DOI: 10.1051/matecconf/201930401026

On the influence of two-dimensional hump roughness on laminar–turbulent transition

Autores: Juan Alberto Franco Sumariva, Stefan Hein, Eusebio Valero
Publicado en: Physics of Fluids, Edición 32/3, 2020, Página(s) 034102, ISSN 1070-6631
Editor: American Institute of Physics
DOI: 10.1063/1.5131577

Experimental/numerical Acoustic Assessment of Aircraft Seat Headrests based on Electrospun Mats

Autores: Venanzio Giannella, Claudio Colangeli, Jacques Cuenca, Mattia Barbarino
Publicado en: Applied Sciences, 2021, ISSN 2078-2489
Editor: Multidisciplinary Digital Publishing Institute (MDPI)

Thin-walled Integral Constructions in Aircraft Industry

Autores: Paweł Bałon, Edward Rejman, Andrzej Świątoniowski, Bartłomiej Kiełbasa, Robert Smusz, Janusz Szostak, Jacek Cieślik, Łukasz Kowalski
Publicado en: Procedia Manufacturing, Edición 47, 2020, Página(s) 498-504, ISSN 2351-9789
Editor: ELSEVIER
DOI: 10.1016/j.promfg.2020.04.153

An ice protection system based on phased piezoelectric transducer

Autores: Ameduri S a,*, Concilio A a, Brindisi A a, Galasso Ba
Publicado en: Actuators, 2024, ISSN 2078-2489
Editor: Multidisciplinary Digital Publishing Institute (MDPI)

Fatigue behaviour of additive manufactured Ti6Al4V, with as-built surfaces, exposed to variable amplitude loading

Autores: M. Kahlin, H. Ansell, J.J. Moverare
Publicado en: International Journal of Fatigue, 2017, ISSN 0142-1123
Editor: Elsevier BV
DOI: 10.1016/j.ijfatigue.2017.06.023

A global assessment of barely visible impact damage for CFRP sub-components with FBG-based sensors

Autores: Sidney Goossens, Francis Berghmans, Kirsa Muñoz, Miguel Jiménez, Evangelos Karachalios, Diego Saenz-Castillo, Thomas Geernaert
Publicado en: Elsevier Composite Structures, 2021, ISSN 0263-8223
Editor: Elsevier BV
DOI: 10.1016/j.compstruct.2021.114025

DESIGNING FOR AUTOMATED COMPOSITES MANUFACTURING OF LOW-VOLUME AEROSTRUCTURES

Autores: Jeff Sloan
Publicado en: Materials Science and Engineering 1226 (2022) 012114, 2021, ISSN 2376-5240
Editor: Composites World

Practicalities of BVID detection on aerospace-grade CFRP materials with optical fibre sensors

Autores: Sidney Goossens, Francis Berghmans, Zahra Sharif Khodaei, Florian Lambinet, Evangelos Karachalios, Diego Saenz-Castillo, Thomas Geernaert
Publicado en: Composite Structures, Edición 259, 2021, Página(s) 113243, ISSN 0263-8223
Editor: Elsevier BV
DOI: 10.1016/j.compstruct.2020.113243

Improved fatigue strength of additively manufactured Ti6Al4V by surface post processing

Autores: M. Kahlin, H. Ansell, D. Basu, A. Kerwin, L. Newton, B. Smith, J.J. Moverare
Publicado en: International Journal of Fatigue, Edición 134, 2020, Página(s) 105497, ISSN 0142-1123
Editor: Elsevier BV
DOI: 10.1016/j.ijfatigue.2020.105497

Damage detection & localization on composite patch repair under different environmental effects

Autores: Florian Lambinet, Zahra Sharif Khodaei
Publicado en: Engineering Research Express, Edición 2/4, 2020, Página(s) 045032, ISSN 2631-8695
Editor: IoP Science
DOI: 10.1088/2631-8695/abd0d3

The effect of local copper mesh geometry on the damage induced in composite structures subjected to artificial lightning strike

Autores: Michael May, Jürgen Kuder, Philipp Hahn, Matti Isakov, Sebastian Schopferer
Publicado en: AIAA Journal, 2021, ISSN 1533-385X
Editor: AIAA
DOI: 10.2514/6.2021-0100

Design for additive manufacturing – a review of available design methods and software

Autores: A. Wiberg, J Persson, J Ölvander
Publicado en: Rapid Prototyping Journal, 2019, ISSN 1355-2546
Editor: Emerald Group Publishing Ltd.
DOI: 10.1108/rpj-10-2018-0262

LRI-fabricated composite demonstrators for an aircraft fuselage on the basis of a Building Block design approach

Autores: Evangelos Karachalios, Kirsa Muñoz, Miguel Jimenez, Vasileios Prentzias, Sidney Goosséns, Thomas Geernaert, Theofanis S. Plagianakos
Publicado en: Composites Part C: Open Access, 2021, ISSN 2666-6820
Editor: Elsevier
DOI: 10.1016/j.jcomc.2021.100178

Damage detection in large composite stiffened panels based on a novel SHM building block philosophy

Autores: Nan Yue, Zahra Sharif Khodaei, M H Aliabadi
Publicado en: Smart Materials and Structures, Edición 30/4, 2021, Página(s) 045004, ISSN 0964-1726
Editor: Institute of Physics Publishing
DOI: 10.1088/1361-665x/abe4b4

Effect of Hot-Wet Storage Aging on Mechanical Response of a Woven Thermoplastic Composite

Autores: Theofanis S. Plagianakos, Kirsa Muñoz, Diego Saenz-Castillo, Maria Mora Mendias, Miguel Jiménez, Vasileios Prentzias
Publicado en: Aerospace, Edición 7/2, 2020, Página(s) 18, ISSN 2226-4310
Editor: MDPI
DOI: 10.3390/aerospace7020018

Variable amplitude loading of additively manufactured Ti6Al4V subjected to surface post processes

Autores: M. Kahlin, H. Ansell, A. Kerwin, B. Smith, J. Moverare
Publicado en: International Journal of Fatigue, Edición 142, 2021, Página(s) 105945, ISSN 0142-1123
Editor: Elsevier BV
DOI: 10.1016/j.ijfatigue.2020.105945

Integrated fabrication of novel inkjet-printed silver nanoparticle sensors on carbon fiber reinforced nylon composites

Autores: Karas B, Beedasy V, Leong Z, Morley NA, Mumtaz K, Smith PJ
Publicado en: Micromachines , 2021, ISSN 2072-666X
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi12101185

Penalty regulation of overhang in topology optimization for additive

Autores: C.J. Thore, H. Alm-Grundström, B. Torstenfelt, A. Klarbring
Publicado en: Structural and Multidisciplinary Optimization, 2019, ISSN 2193-1801
Editor: Springer Science and Business Media Deutschland GmbH
DOI: 10.1007/s00158-019-02194-x

Intrinsic dependence of ice adhesion strength on surface roughness

Autores: Halar Memon, Junpeng Liu, Davide S.A. De Focatiis, Kwing-so Choi, Xianghui Hou
Publicado en: Surface and Coatings Technology, Edición 385, 2020, Página(s) 125382, ISSN 0257-8972
Editor: Elsevier BV
DOI: 10.1016/j.surfcoat.2020.125382

Particle and rain erosion mechanisms on Ti/TiN multilayer PVD coatings for carbon fibre reinforced polymer substrates protection

Autores: Borja Coto, Per Hallander, Lucía Mendizabal, Francesco Pagano, Hans Kling, Rocío Ortiz, Javier Barriga, Linnéa Selegård
Publicado en: Wear, Edición 466-467, 2021, Página(s) 203575, ISSN 0043-1648
Editor: Elsevier BV
DOI: 10.1016/j.wear.2020.203575

Development of Hybrid Piezoelectric-Fibre Optic Composite Patch Repair Solutions

Autores: Florian Lambinet & Zahra Sharif Khodaei
Publicado en: Sensors Journal, 2021, ISSN 1424-8220
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s21155131

Experimental Characterization of Aircraft Electromagnetic Protections

Autores: D. Krutilek (EVE); Z. Raida (BUT); J. Drinovsky (BUT)
Publicado en: Radioengineering Journal, 2021, ISSN 1210-2512
Editor: Brno University of Technology
DOI: 10.13164/re.2021.0654

Designing ferrite impregnated epoxy actuators for impact damage detection in carbon fibre reinforced composites

Autores: Surakarnkha J, Zhaoyuan L, Gong P, Holmes W, Desai P, Foreman J, Morley N
Publicado en: Composites Science and Technology , 2021, ISSN 1880-3989
Editor: Elsevier BV
DOI: 10.1016/j.compscitech.2021.109085

Development of methods for designing and manufacturing aircraft components with additive technologies

Autores: Włodzimierz Adamski, Janusz Michalcewicz
Publicado en: Mechanik, Edición 93/3, 2020, Página(s) 8-14, ISSN 0025-6552
Editor: http://eng.mechanik.media.pl/about-mechanik.html
DOI: 10.17814/mechanik.2020.3.7

Validation of Lightning Simulation Compared With Measurements Using DCI Technique Post-Processed to be Applied to a Lightning Threat

Autores: G. Gutiérrez et al.
Publicado en: IEEE-TEMC, 2023, ISSN 2473-2001
Editor: IEEE-TEMC
DOI: 10.1109/temc.2022.3217393

Circularity studies on high performance thermoplastic demonstrators for the aircraft industry – End-of-Life concepts for PEKK/carbon fibre composites

Autores: Selim Coskun
Publicado en: Journal of Physics: Conference Series, 2023, ISSN 1742-6596
Editor: IOP Publishing
DOI: 10.1088/1742-6596/2526/1/012051

Aerodynamic Design of Airfoil Shape for Gust Generation in a Transonic Wind Tunnel

Autores: N. Natale, · S. Russo, · S. Dequand, · A. Lepage, · N. Paletta
Publicado en: Aerotecnica Missili & Spazio, 2021, ISSN 0365-7442
Editor: Springer

Analysis and design of a leading edge with morphing capabilities for the wing of a regional aircraft – gapless chord- and camber-increase for high-lift performance

Autores: Conchin Contell Asins, Volker Landersheim, Dominik Laveuve, Seiji Adachi, Michael May, Jens-David Wacker, Julia Decker
Publicado en: Applied Sciences, 2021, ISSN 2078-2489
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/app11062752

Topology optimization using a continuous-time high-cycle fatigue model

Autores: S Suresh, S B Lindström, C-J Thore, B Torstenfelt and A Klarbring
Publicado en: Structural and Multidisciplinary Optimization, 2019, ISSN 2193-1801
Editor: Springer Science and Business Media Deutschland GmbH
DOI: 10.1007/s00158-019-02400-w

The DressMAN 3.2-System for evaluation of thermal comfort in the Passenger Cabin Ground Demonstrator

Autores: Michael Visser, Sumee Park, Sebastian Stratbücker, Victor Norrefeldt, Andreas Lindner
Publicado en: Materials Science and Engineering 1226 (2022) 012114, 2022, ISSN 1757-899X
Editor: IOP Conference
DOI: 10.1088/1757-899x/1226/1/012114

Investigation of the impact of a particle foam insulation on frost buildup on the aircraft structure

Autores: Victor Norrefeldt and Gerhard Riedl
Publicado en: IOP Conference Series, 2022, ISSN 1757-899X
Editor: IOP Publishing Ltd

Damage resistance of composite structures with unsymmetrical stacking sequence subjected to high velocity bird impact

Autores: Michael May, Sonja Arnold-Keifer, Thomas Haase
Publicado en: Composites Part C: Open Access, Edición 1, 2020, Página(s) 100002, ISSN 2666-6820
Editor: Elsevier
DOI: 10.1016/j.jcomc.2020.100002

Durability enhancement of low ice adhesion polymeric coatings

Autores: Halar Memon, Davide S.A. De Focatiis, Kwing-So Choi, Xianghui Hou
Publicado en: Progress in Organic Coatings, Edición 151, 2021, Página(s) 106033, ISSN 0300-9440
Editor: Elsevier BV
DOI: 10.1016/j.porgcoat.2020.106033

A Generalized State-Space Aeroservoelastic Model based on Tangential Interpolation

Autores: D. Quero-Martin, P. Vuillemin & Ch. Poussot-Vassal
Publicado en: Aerospace 2019, 2019, ISSN 2226-4310
Editor: Aeroelasticity
DOI: 10.3390/aerospace6010009

Superhydrophobic Coatings as Anti-Icing Systems for Small Aircraft

Autores: Filomena Piscitelli, Antonio Chiariello, Dariusz Dabkowski, Gianluca Corraro, Francesco Marra, Luigi Di Palma
Publicado en: Aerospace, Edición 7/1, 2020, Página(s) 2, ISSN 2226-4310
Editor: MDPI
DOI: 10.3390/aerospace7010002

Design and Development of Magnetostrictive Actuators and Sensors for Structural Health Monitoring

Autores: Jamin Daniel Selvakumar Vincent, Michelle Rodrigues, Zhaoyuan Leong, Nicola A. Morley
Publicado en: Sensors, Edición 20/3, 2020, Página(s) 711, ISSN 1424-8220
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s20030711

Effect of increased cabin recirculation airflow fraction on relative humidity, CO2 and TVOC

Autores: Victor Norrefeldt, Florian Mayer, Britta Herbig, Ria StrÖhlein
Publicado en: IOP Conference Series, 2022, ISSN 1757-899x
Editor: IOP Conference

Collisions between drones and rotorcraft: modeling of the crash response of battery packs

Autores: May, M.; Schneider, N.; Schaufelberger, B.; Jung, M.; Pfaff, J.; Altes, A.; Haase, T.; Schopferer, S.; Imbert, M.; Matura, P.; Blacha, M.
Publicado en: American Helicopter Society, 2024, ISSN 1045-3172
Editor: Blackwell Publishing Inc.
DOI: 10.4050/jahs.69.012004

Digital Clone Testing Platform for the Assessment of SHM Systems under Uncertainty

Autores: I. N. Giannakeas, Z. Sharif Khodaei and M.H. Aliabadi
Publicado en: Mechanical Systems and Signal Processing, 2021, ISSN 0888-3270
Editor: Academic Press

Preliminary user centred evaluation of regional aircraft cabin interiors in virtual reality

Autores: De Crescenzio F.; Bagassi S.; Starita F.
Publicado en: SCIENTIFIC REPORTS, Edición 11, 2021, Página(s) 1-10, ISSN 2045-2322
Editor: Nature Publishing Group
DOI: 10.1038/s41598-021-89098-3

Bird Strike Resistance of a CFRP Morphing Leading Edge

Autores: Michael May, Sonja Arnold-Keifer, Volker Landersheim, Dominik Laveuve, Conchin Contell Asins, Mathieu Imbert
Publicado en: Composites Part C: Open Access, 2021, ISSN 2666-6820
Editor: Elsevier
DOI: 10.1016/j.jcomc.2021.100115

Control of Laminar turbulent transition using wall suction through a porous metal foam

Autores: B. Egreteau, J. Methel, F. Méry, O. Vermeersch, C. Davoine, M. Forte, M. Thomas
Publicado en: 2020
Editor: ISAE SPAERO

Airbus Helicopters focuses on maintaining Racer’s pace

Autores: Chief Engineer of RACER, MAKINADJIAN, Brice <brice.makinadjian@airbus.com>
Publicado en: Flight International, Edición 5th May 2020, 2020, Página(s) 17
Editor: Chief Engineer of RACER

Wind Tunnel Verification of Laminar Boundary Layer Control TSSD Concept

Autores: Arne Seitz, Matthias Horn
Publicado en: 2022
Editor: AIAA
DOI: 10.2514/6.2022-3552

Application of the partial Dirichlet-Neumann contact algorithm to simulate low-velocity impact events on composite structures

Autores: G. Guillamet, A. Quintanas-Corominas, M. Rivero, G. Houzeaux, M. Vázquez, A. Turon
Publicado en: 2022
Editor: Elsevier
DOI: 10.1016/j.compositesa.2022.107424

Aerothermal computations for laminar–turbulent transition onset measurement using infrared imaging technique

Autores: Lalande M., Vermeersch O., Méry F., Reulet P., et Forte M
Publicado en: 2023
Editor: AIAA Journal, Vol. 61, N°1
DOI: 10.2514/1.j062048

Digital Clone Testing Platform for the Assessment of SHM Systems under Uncertainty

Autores: I. N. Giannakeas, Z. Sharif Khodaei and M.H. Aliabadi
Publicado en: 2022
Editor: ELSEVIER

Active Noise Control for Aircraft Cabin Seats

Autores: Ignazio Dimino, Claudio Colangeli, Jacques Cuenca, Pasquale Vitiello, Mattia Barbarino
Publicado en: 2022
Editor: MDPI

Numerical aero-thermal modelling for improvement of infra-red measurement of laminar-turbulent transition

Autores: Lalande M., Vermeersch O., Méry F., Reulet P., et Forte M
Publicado en: 2022
Editor: ISAE SUPAERO Toulouse, FRANCE

Whole-Body Vibration Experienced by Pilots, Passengers and Crew in Fixed-Wing Aircraft: A State-of-the-Science Review

Autores: Neil J. Mansfield, Geetika Aggarwal
Publicado en: 2022
Editor: MDPI
DOI: 10.3390/vibration5010007

Hot stamping of aerospace aluminium alloys: Automotive technologies for the aeronautics industry

Autores: G Atxaga*, A. Arroyo and B. Canflanca
Publicado en: 2022
Editor: Journal - Elsevier

Manufacturing of a porous metallic panel by spark plasma sintering for hybrid laminar flow control application

Autores: B. Egreteau, C. Davoine, F. Méry, O. Vermeersch, M. Thomas
Publicado en: 2022
Editor: EPMA Lyon

Élaboration d’un panneau métallique poreux par frittage flash pour dispositif de contrôle de couche limite

Autores: B. Egreteau, C. Davoine, F. Méry, O. Vermeersch, M. Thomas
Publicado en: 2022
Editor: Fédération Française des Matériaux

Measurement Platform for Structural Health Monitoring Application of Large Scale Structures

Autores: F. Lambinet, Z. Sharif Khodaei
Publicado en: 2022
Editor: ELSEVIER

A parallel algorithm for unilateral contact problems

Autores: G. Guillamet, M. Rivero, M. Zavala-Aké, M. Vázquez, G. Houzeaux, S. Oller
Publicado en: Computers and Structures, 2022
Editor: Elsevier
DOI: 10.1016/j.compstruc.2022.106862

Alta velocidad en ala rotatoria, concepto de helicóptero compuesto.

Autores: Juan Manuel Jiménez
Publicado en: Boletín de Observación Tecnológica en Defensa, 2021, ISSN 2444-4839
Editor: Ministerio de Defensa. Secretaría General Técnica.

Die Material Selection Criteria for Aluminum Hot Stamping

Autores: Muro M., Aseguinolaza I., Artola G.
Publicado en: Die Material Selection Criteria for Aluminum Hot Stamping, 2021, ISSN 2504-4494
Editor: MDPI
DOI: 10.3390/jmmp5010015

Experimental and numerical study on wall impedance effects on Tollmien-Schlichting waves

Autores: A. Rouvière, F. Mery, O. Vermeersch, J. Methel, M. Forte
Publicado en: AAIA Journal, 2021, ISSN 1533-385X
Editor: AIAA

Effect of Hot-Wet Storage Aging on Static and Fatigue Response of a Woven Thermoplastic Polymer

Autores: Theofanis S. Plagianakos, Kirsa Muñoz, Diego Saenz-Castillo, Maria Mora Mendias, Miguel Jiménez and Vasileios Prentzias
Publicado en: Aerospace 2020, 7, 18, Edición 24-02-2020, 2020, Página(s) https://www.mdpi.com/2226-4310/7/2/18, ISSN 2226-4310
Editor: MDPI

DESIGNING FOR AUTOMATED COMPOSITES MANUFACTURING OF LOW-VOLUME AEROSTRUCTURES

Autores: Jeff Sloan
Publicado en: Composites World, 2021, ISSN 2376-5240
Editor: CompositesWorld Magazine

Interpolatory methods for generic BizJet gust load alleviation function

Autores: C. Poussot-Vassal, P. Vuillemin, O. Cantinaud and F. Sève,
Publicado en: SIAM Journal on Applied Dynamical Systems, Edición November 2021, 2021, Página(s) 2391–2411, ISSN 1536-0040
Editor: Society of Industrial and Applied Mathematics
DOI: 10.1137/20m1384014

Design of a morphing leading edge as a high lift device for a regional aircraft

Autores: C Contell Asins, V Landersheim, J-D Wacker, S Adachi, S Arnold-Keifer, M May
Publicado en: IOP Conference Series: Materials Science and Engineering, Edición 1024/1, 2021, Página(s) 012033, ISSN 1757-8981
Editor: IOP Publishing Ltd
DOI: 10.1088/1757-899x/1024/1/012033

Effect of Hot-Wet Storage Aging on Static and Fatigue Response of a Woven Thermoplastic Polymer

Autores: Theofanis S. Plagianakos, Kirsa Muñoz, Diego Saenz-Castillo, Maria Mora Mendias, Miguel Jiménez and Vasileios Prentzias
Publicado en: MDPI, 2020, ISSN 2226-4310
Editor: MDPI

Derechos de propiedad intelectual

Improvement of manufacturing processes: Liquid Resin Infusion (LRI) for more eco-friendly production of composite structural parts

Número de solicitud/publicación: EF 131
Fecha: 2020-12-31
Solicitante(s): ELLINIKI AEROPORIKI VIOMICHANIA ANONYMI ETAIREIA

Cockpit mock up for ergonomic testing

Número de solicitud/publicación: EF 135
Fecha: 2020-12-31
Solicitante(s): ALMADESIGN CONCEITO E DESENVOLVIMENTO DE DESIGN LDA

Buscando datos de OpenAIRE...

Resultado final

Publicaciones

Derechos de propiedad intelectual

Compartir esta página

Descargar