AIRFRAME ITD

Livrables

2022 D&C plan update

Dissemination and Communication Plan updated for 2022

2020 D&C plan update

Dissemination and Communication Plan updated for 2020

2020 D&C plan update

Dissemination and Communication Plan updated for 2020

2021 D&C plan update

Dissemination and Communication Plan updated for 2021

2021 D&C plan update

Dissemination and Communication Plan updated for 2021

2023 D&C plan update

Dissemination and Communication Plan updated for 2023

Publications

Flat inkjet-printed copper induction coils for magnetostrictive structural health monitoring: A comparison with bulk air coils and an anisotropic magnetoresistive sensor (AMR) sensor

Auteurs: Gullapalli A, Beedasy V, Vincent JDS, Leong Z, Smith P, Morley N
Publié dans: Advanced Engineering Materials, 2021, ISSN 1438-1656
Éditeur: John Wiley & Sons Ltd.
DOI: 10.1002/adem.202100313

The Effect of Post-Processing on the Mechanical Behavior of Ti6Al4V Manufactured by Electron Beam Powder Bed Fusion for General Aviation Primary Structural Applications

Auteurs: Carmine Pirozzi, Stefania Franchitti, Rosario Borrelli, Antonio Chiariello, Luigi Di Palma
Publié dans: Aerospace, Numéro 7/6, 2020, Page(s) 75, ISSN 2226-4310
Éditeur: MDPI
DOI: 10.3390/aerospace7060075

Towards exceptional icephobicity with chionophile-inspired durable biomimetic coatings

Auteurs: Halar Memon, Davide S.A. De Focatiis, Kwing-So Choi, and Xianghui Hou
Publié dans: ACS Applied Polymer Materials, 2021, ISSN 2637-6105
Éditeur: ACS
DOI: 10.1021/acsapm.1c00623

Effect of some riveting process parameters on the fatigue life of double-shear lap joints

Auteurs: Jan Papuga, Jiří Stejskal
Publié dans: ScienceDirect.com, 2021, ISSN 1880-3989
Éditeur: elsevier.com
DOI: 10.1016/j.engfailanal.2021.106008

Fatigue crack growth for through and part-through cracks in additively manufactured Ti6Al4V

Auteurs: M. Kahlin, H. Ansell, J. Moverare
Publié dans: International Journal of Fatigue, 2021, ISSN 0142-1123
Éditeur: Elsevier BV
DOI: 10.1016/j.ijfatigue.2021.106608

Experimental investigation of damage detection on structures with friction stir welding (FSW) junctions

Auteurs: A Sorrentino, A Chiariello, L Di Palma, A De Fenza
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 1024/1, 2021, Page(s) 012031, ISSN 1757-8981
Éditeur: IOP Publishing Ltd
DOI: 10.1088/1757-899x/1024/1/012031

PREDICTIVE CAPACITY OF FDTD METHOD EMBEDDING MTLN TECHNIQUE FOR LIGHTNING AND HIRF THREATS

Auteurs: Guadalupe Gutierrez Gutierrez, Tim McDonald, Carlos Rodriguez Paños, Raul Molero Castejon, Hugo Tavares, Hirahi Galindo Perez, Enrique Pascual-Gil
Publié dans: Progress In Electromagnetics Research C, Numéro 107, 2021, Page(s) 33-47, ISSN 1937-8718
Éditeur: EMW Publishing
DOI: 10.2528/pierc20092006

Aircraft interior and seat design: priorities based on passengers’ opinions

Auteurs: Vink, P., Vledder, G., Song, Y., Herbig, B., Reichherzer, A. S., & Mansfield, N.
Publié dans: International Journal of Aviation, Aeronautics, and Aerospace, 2022, ISSN 2374-6793
Éditeur: n/a

Model validation for a transient ECS failure case in a business jet mock-up

Auteurs: A.J. M.Lindner, M. Pschirer and V. Norrefeldt
Publié dans: IOP Conference, 2022, ISSN 1757-899X
Éditeur: IOP Conference
DOI: 10.1088/1757-899x/1226/1/012110

Implementation of dimensional management methodology and optimisation algorithms for pre-drilled hinge line interfaces of critical aero assemblies – A case study

Auteurs: Konstantinos C Bacharoudis, David Bainbridge, Alison Turner, Atanas A Popov, Svetan M Ratchev
Publié dans: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Numéro Numéro 14, December 2020, 2020, Page(s) 095440542097810, ISSN 0954-4054
Éditeur: Professional Engineering Publishing Ltd.
DOI: 10.1177/0954405420978101

Role of surface finishing and interfacial lacquer layer on particle erosion mechanisms of Ti/TiN multilayer PVD coatings for carbon fibre reinforced polymer substrates protection

Auteurs: Borja Coto, Lucía Mendizabal, Francesco Pagano, Hans Kling, Itziar Azpitarte, Javier Barriga, Linnea Selegård
Publié dans: Materials Letters, Numéro 285, 2021, Page(s) 129187, ISSN 0167-577X
Éditeur: Elsevier BV
DOI: 10.1016/j.matlet.2020.129187

Spectral Verification of the Mechanisms behind FBG-Based Ultrasonic Guided Wave Detection

Auteurs: Sidney Goossens, Francis Berghmans, Thomas Geernaert
Publié dans: Sensors, Numéro 20/22, 2020, Page(s) 6571, ISSN 1424-8220
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s20226571

Novel multi-zone self-heated composites tool for out-of-autoclave aerospace components manufacturing

Auteurs: Nithin Jayasree, Sadik Omairey and Mihalis Kazilas
Publié dans: Science and Engineering of Composite Materials, Numéro Volume 27: Numéro 1, 2020, Page(s) 325–334, ISSN 2191-0359
Éditeur: De Gruyter
DOI: 10.1515/secm-2020-0033

High-rate in-plane shear testing of IM7/8552 using the Split Hopkinson Tension Bar

Auteurs: Noah Ledford, Mathieu Imbert, Michael May
Publié dans: AIAA Journal, 2021, ISSN 1533-385X
Éditeur: AIAA
DOI: 10.2514/1.j060269

Comparative study on the influence of surface characteristics on de-icing evaluation

Auteurs: Xianghui Hou
Publié dans: Journal of Materials Science, 2021, ISSN 1573-4803
Éditeur: Springer
DOI: 10.1007/s10853-021-06407-x

Flame retardant investigations on carbon fibre-reinforced polyurethane resin parts for aircraft applications produced by wet compression moulding

Auteurs: Carl-Christoph Höhne
Publié dans: Fire and Materials, 2021, ISSN 1097-0037
Éditeur: Willey
DOI: 10.1002/fam.2965

Effects of hot-wet storage aging, CNT-integration and damping layer interposition on static and fatigue interlaminar shear response of a UD Graphite/Epoxy material system

Auteurs: Theofanis S. Plagianakos, Kirsa Muñoz, Stylianos Strapatsakis, Maria del Mar Fernandez, Miguel Jimenez, Evangelos Karachalios
Publié dans: Materials Today Communications, Numéro 25, 2020, Page(s) 101296, ISSN 2352-4928
Éditeur: Elsevier BV
DOI: 10.1016/j.mtcomm.2020.101296

Acoustic Improvements of Aircraft Headrests Based on Electrospun Mats Evaluated Through Boundary Element Method

Auteurs: Venanzio Giannella, Francesco Branda, Jessica Passaro, Giuseppe Petrone, Mattia Barbarino, Roberto Citarella
Publié dans: Applied Sciences, Numéro 10/16, 2020, Page(s) 5712, ISSN 2076-3417
Éditeur: MDPI
DOI: 10.3390/app10165712

On the influence of two-dimensional hump roughness on laminar–turbulent transition

Auteurs: Juan Alberto Franco Sumariva, Stefan Hein, Eusebio Valero
Publié dans: Physics of Fluids, Numéro 32/3, 2020, Page(s) 034102, ISSN 1070-6631
Éditeur: American Institute of Physics
DOI: 10.1063/1.5131577

Experimental/numerical Acoustic Assessment of Aircraft Seat Headrests based on Electrospun Mats

Auteurs: Venanzio Giannella, Claudio Colangeli, Jacques Cuenca, Mattia Barbarino
Publié dans: Applied Sciences, 2021, ISSN 2078-2489
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)

Thin-walled Integral Constructions in Aircraft Industry

Auteurs: Paweł Bałon, Edward Rejman, Andrzej Świątoniowski, Bartłomiej Kiełbasa, Robert Smusz, Janusz Szostak, Jacek Cieślik, Łukasz Kowalski
Publié dans: Procedia Manufacturing, Numéro 47, 2020, Page(s) 498-504, ISSN 2351-9789
Éditeur: ELSEVIER
DOI: 10.1016/j.promfg.2020.04.153

A global assessment of barely visible impact damage for CFRP sub-components with FBG-based sensors

Auteurs: Sidney Goossens, Francis Berghmans, Kirsa Muñoz, Miguel Jiménez, Evangelos Karachalios, Diego Saenz-Castillo, Thomas Geernaert
Publié dans: Elsevier Composite Structures, 2021, ISSN 0263-8223
Éditeur: Elsevier BV
DOI: 10.1016/j.compstruct.2021.114025

Practicalities of BVID detection on aerospace-grade CFRP materials with optical fibre sensors

Auteurs: Sidney Goossens, Francis Berghmans, Zahra Sharif Khodaei, Florian Lambinet, Evangelos Karachalios, Diego Saenz-Castillo, Thomas Geernaert
Publié dans: Composite Structures, Numéro 259, 2021, Page(s) 113243, ISSN 0263-8223
Éditeur: Elsevier BV
DOI: 10.1016/j.compstruct.2020.113243

Improved fatigue strength of additively manufactured Ti6Al4V by surface post processing

Auteurs: M. Kahlin, H. Ansell, D. Basu, A. Kerwin, L. Newton, B. Smith, J.J. Moverare
Publié dans: International Journal of Fatigue, Numéro 134, 2020, Page(s) 105497, ISSN 0142-1123
Éditeur: Elsevier BV
DOI: 10.1016/j.ijfatigue.2020.105497

Damage detection & localization on composite patch repair under different environmental effects

Auteurs: Florian Lambinet, Zahra Sharif Khodaei
Publié dans: Engineering Research Express, Numéro 2/4, 2020, Page(s) 045032, ISSN 2631-8695
Éditeur: IoP Science
DOI: 10.1088/2631-8695/abd0d3

The effect of local copper mesh geometry on the damage induced in composite structures subjected to artificial lightning strike

Auteurs: Michael May, Jürgen Kuder, Philipp Hahn, Matti Isakov, Sebastian Schopferer
Publié dans: AIAA Journal, 2021, ISSN 1533-385X
Éditeur: AIAA
DOI: 10.2514/6.2021-0100

LRI-fabricated composite demonstrators for an aircraft fuselage on the basis of a Building Block design approach

Auteurs: Evangelos Karachalios, Kirsa Muñoz, Miguel Jimenez, Vasileios Prentzias, Sidney Goosséns, Thomas Geernaert, Theofanis S. Plagianakos
Publié dans: Composites Part C: Open Access, 2021, ISSN 2666-6820
Éditeur: Elsevier
DOI: 10.1016/j.jcomc.2021.100178

Damage detection in large composite stiffened panels based on a novel SHM building block philosophy

Auteurs: Nan Yue, Zahra Sharif Khodaei, M H Aliabadi
Publié dans: Smart Materials and Structures, Numéro 30/4, 2021, Page(s) 045004, ISSN 0964-1726
Éditeur: Institute of Physics Publishing
DOI: 10.1088/1361-665x/abe4b4

Effect of Hot-Wet Storage Aging on Mechanical Response of a Woven Thermoplastic Composite

Auteurs: Theofanis S. Plagianakos, Kirsa Muñoz, Diego Saenz-Castillo, Maria Mora Mendias, Miguel Jiménez, Vasileios Prentzias
Publié dans: Aerospace, Numéro 7/2, 2020, Page(s) 18, ISSN 2226-4310
Éditeur: MDPI
DOI: 10.3390/aerospace7020018

Variable amplitude loading of additively manufactured Ti6Al4V subjected to surface post processes

Auteurs: M. Kahlin, H. Ansell, A. Kerwin, B. Smith, J. Moverare
Publié dans: International Journal of Fatigue, Numéro 142, 2021, Page(s) 105945, ISSN 0142-1123
Éditeur: Elsevier BV
DOI: 10.1016/j.ijfatigue.2020.105945

Integrated fabrication of novel inkjet-printed silver nanoparticle sensors on carbon fiber reinforced nylon composites

Auteurs: Karas B, Beedasy V, Leong Z, Morley NA, Mumtaz K, Smith PJ
Publié dans: Micromachines , 2021, ISSN 2072-666X
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi12101185

Intrinsic dependence of ice adhesion strength on surface roughness

Auteurs: Halar Memon, Junpeng Liu, Davide S.A. De Focatiis, Kwing-so Choi, Xianghui Hou
Publié dans: Surface and Coatings Technology, Numéro 385, 2020, Page(s) 125382, ISSN 0257-8972
Éditeur: Elsevier BV
DOI: 10.1016/j.surfcoat.2020.125382

Particle and rain erosion mechanisms on Ti/TiN multilayer PVD coatings for carbon fibre reinforced polymer substrates protection

Auteurs: Borja Coto, Per Hallander, Lucía Mendizabal, Francesco Pagano, Hans Kling, Rocío Ortiz, Javier Barriga, Linnéa Selegård
Publié dans: Wear, Numéro 466-467, 2021, Page(s) 203575, ISSN 0043-1648
Éditeur: Elsevier BV
DOI: 10.1016/j.wear.2020.203575

Development of Hybrid Piezoelectric-Fibre Optic Composite Patch Repair Solutions

Auteurs: Florian Lambinet & Zahra Sharif Khodaei
Publié dans: Sensors Journal, 2021, ISSN 1424-8220
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s21155131

Experimental Characterization of Aircraft Electromagnetic Protections

Auteurs: D. Krutilek (EVE); Z. Raida (BUT); J. Drinovsky (BUT)
Publié dans: Radioengineering Journal, 2021, ISSN 1210-2512
Éditeur: Brno University of Technology
DOI: 10.13164/re.2021.0654

Designing ferrite impregnated epoxy actuators for impact damage detection in carbon fibre reinforced composites

Auteurs: Surakarnkha J, Zhaoyuan L, Gong P, Holmes W, Desai P, Foreman J, Morley N
Publié dans: Composites Science and Technology , 2021, ISSN 1880-3989
Éditeur: Elsevier BV
DOI: 10.1016/j.compscitech.2021.109085

Development of methods for designing and manufacturing aircraft components with additive technologies

Auteurs: Włodzimierz Adamski, Janusz Michalcewicz
Publié dans: Mechanik, Numéro 93/3, 2020, Page(s) 8-14, ISSN 0025-6552
Éditeur: http://eng.mechanik.media.pl/about-mechanik.html
DOI: 10.17814/mechanik.2020.3.7

Aerodynamic Design of Airfoil Shape for Gust Generation in a Transonic Wind Tunnel

Auteurs: N. Natale, · S. Russo, · S. Dequand, · A. Lepage, · N. Paletta
Publié dans: Aerotecnica Missili & Spazio, 2021, ISSN 0365-7442
Éditeur: Springer

Analysis and design of a leading edge with morphing capabilities for the wing of a regional aircraft – gapless chord- and camber-increase for high-lift performance

Auteurs: Conchin Contell Asins, Volker Landersheim, Dominik Laveuve, Seiji Adachi, Michael May, Jens-David Wacker, Julia Decker
Publié dans: Applied Sciences, 2021, ISSN 2078-2489
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/app11062752

The DressMAN 3.2-System for evaluation of thermal comfort in the Passenger Cabin Ground Demonstrator

Auteurs: Michael Visser, Sumee Park, Sebastian Stratbücker, Victor Norrefeldt, Andreas Lindner
Publié dans: Materials Science and Engineering 1226 (2022) 012114, 2022, ISSN 1757-899X
Éditeur: IOP Conference
DOI: 10.1088/1757-899x/1226/1/012114

Investigation of the impact of a particle foam insulation on frost buildup on the aircraft structure

Auteurs: Victor Norrefeldt and Gerhard Riedl
Publié dans: IOP Conference Series, 2022, ISSN 1757-899X
Éditeur: IOP Publishing Ltd

Damage resistance of composite structures with unsymmetrical stacking sequence subjected to high velocity bird impact

Auteurs: Michael May, Sonja Arnold-Keifer, Thomas Haase
Publié dans: Composites Part C: Open Access, Numéro 1, 2020, Page(s) 100002, ISSN 2666-6820
Éditeur: Elsevier
DOI: 10.1016/j.jcomc.2020.100002

Durability enhancement of low ice adhesion polymeric coatings

Auteurs: Halar Memon, Davide S.A. De Focatiis, Kwing-So Choi, Xianghui Hou
Publié dans: Progress in Organic Coatings, Numéro 151, 2021, Page(s) 106033, ISSN 0300-9440
Éditeur: Elsevier BV
DOI: 10.1016/j.porgcoat.2020.106033

Superhydrophobic Coatings as Anti-Icing Systems for Small Aircraft

Auteurs: Filomena Piscitelli, Antonio Chiariello, Dariusz Dabkowski, Gianluca Corraro, Francesco Marra, Luigi Di Palma
Publié dans: Aerospace, Numéro 7/1, 2020, Page(s) 2, ISSN 2226-4310
Éditeur: MDPI
DOI: 10.3390/aerospace7010002

Design and Development of Magnetostrictive Actuators and Sensors for Structural Health Monitoring

Auteurs: Jamin Daniel Selvakumar Vincent, Michelle Rodrigues, Zhaoyuan Leong, Nicola A. Morley
Publié dans: Sensors, Numéro 20/3, 2020, Page(s) 711, ISSN 1424-8220
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s20030711

Effect of increased cabin recirculation airflow fraction on relative humidity, CO2 and TVOC

Auteurs: Victor Norrefeldt, Florian Mayer, Britta Herbig, Ria StrÖhlein
Publié dans: IOP Conference Series, 2022, ISSN 1757-899x
Éditeur: IOP Conference

Digital Clone Testing Platform for the Assessment of SHM Systems under Uncertainty

Auteurs: I. N. Giannakeas, Z. Sharif Khodaei and M.H. Aliabadi
Publié dans: Mechanical Systems and Signal Processing, 2021, ISSN 0888-3270
Éditeur: Academic Press

Preliminary user centred evaluation of regional aircraft cabin interiors in virtual reality

Auteurs: De Crescenzio F.; Bagassi S.; Starita F.
Publié dans: SCIENTIFIC REPORTS, Numéro 11, 2021, Page(s) 1-10, ISSN 2045-2322
Éditeur: Nature Publishing Group
DOI: 10.1038/s41598-021-89098-3

Bird Strike Resistance of a CFRP Morphing Leading Edge

Auteurs: Michael May, Sonja Arnold-Keifer, Volker Landersheim, Dominik Laveuve, Conchin Contell Asins, Mathieu Imbert
Publié dans: Composites Part C: Open Access, 2021, ISSN 2666-6820
Éditeur: Elsevier
DOI: 10.1016/j.jcomc.2021.100115

Design of a Morphing Leading Edge for use as a High Lift Device for a Regional Aircraft

Auteurs: Volker Landersheim, Conchin Contell Asins, Jens-David Wacker, Seiji Adachi, Sonja Arnold-Keifer, Michael May
Publié dans: IOP Conference Series: Materials Science and Engineering, 2021
Éditeur: IOP Publishing Ltd
DOI: 10.1088/1757-899x/1024/1/012033

Sustainability-oriented topology optimization of aircraft components and best practices in LPBF-based metal additive manufacturing

Auteurs: Klaus Hoschke, Konstantin Kappe, Sankalp Patil, Aron Pfaff, Michael May, Jens Osterholz
Publié dans: 2022
Éditeur: 3AF

OPTICAL FIBRE BRAGG GRATING SENSORS FOR BVID DETECTION ON COMPOSITE SUB-COMPONENTS

Auteurs: S. Goossens, T. Geernaert, K. Muñoz, M. Jiménez, E. Karachalios, D. Saenz-Castillo, F. Berghmans
Publié dans: 3AF Aerospace Europe Conference 2020, Numéro 25-28/02/2020, 2020
Éditeur: 3AF

Multidimensional Design Assessment Model for eco-efficiency and efficiency in aeronautical assembly processes

Auteurs: E.J. Lourenco, M. Oliva, M.A. Estrela, A. J. Baptista
Publié dans: 2019 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC), Numéro 17-19/06 2019, 2019, Page(s) 1-9, ISBN 978-1-7281-3401-7
Éditeur: IEEE
DOI: 10.1109/ice.2019.8792641

Analysis and Uncertainty Quantification of a Hybrid Laminar Flow Control System

Auteurs: Alexander Barklage, Ulrich Römer ORCID Icon, Anna Bertram, Philipp Bekemeyer, Jan Himisch, Rolf Radespiel and Camli Badrya
Publié dans: 2022
Éditeur: AIAA
DOI: 10.2514/6.2022-2452

Numerical Studies on the Influence of Step-Like Surface Irregularities on the Development of Tollmien-Schlichting Waves

Auteurs: A. Franco, S. Hein
Publié dans: IUTAM Laminar-Turbulent Transition. IUTAM Bookseries, 2021
Éditeur: Springer, Sherwin S., Schmid P., Wu X. (eds)
DOI: 10.1007/978-3-030-67902-6_64

Defining the Potential of Extended Reality Tools for Implementing Co-creation of User Oriented Products and Systems

Auteurs: Santhosh; De Crescenzio; Vitolo
Publié dans: Design Tools and Methods in Industrial Engineering II. ADM 2021. Lecture Notes in Mechanical Engineering., 2022, Page(s) 165-174, ISBN 978-3-030-91233-8
Éditeur: Springer Nature
DOI: 10.1007/978-3-030-91234-5_17

Challenges of complex monitoring of the curing parameters in coupons for LRI manufacturing

Auteurs: A. Torre-Poza, A. M. R. Pinto, T. Grandal, N. González-Castro, L. Carral, E. Rodríguez-Senín
Publié dans: INCAS BULLETIN, Volume 13, Numéro 1/ 2021, 2021
Éditeur: INCAS – National Institute for Aerospace Research “Elie Carafoli”
DOI: 10.13111/2066-8201.2021.13.1.21

High-rate in-plane shear testing of CFRP using the Split Hopkinson Tension Bar

Auteurs: Noah Ledford, Mathieu Imbert, Michael May
Publié dans: 2021 AIAA SciTech Forum and Exposition, 2021
Éditeur: AIAA
DOI: 10.2514/6.2021-0167

Large-Sclae Wind Tunnel Testing of an Advanced Hybrid Laminar Flow Control System

Auteurs: Peter Scholz, Alexander Barklage, Bart van Rooijen, Arne Seitz, Matthias Horn, Camli Badrya, Rolf Radespiel
Publié dans: German Aeorospace Conference, 2022
Éditeur: Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V.
DOI: 10.25967/570065

Lightning Low Level vs High Level Direct Current Injection Tests on a Full Scale Aircraft Cockpit

Auteurs: Fernando Cano Perez, Guadalupe Gutierrez Gutierrez, Hugo Tavares, Abderrahim Khamlichi, Josefina Menendez Alberquilla, Raul Molero Castejon, Nelson Matos, Angel Ramirez Linares
Publié dans: 2019 International Symposium on Electromagnetic Compatibility - EMC EUROPE, Numéro 2-6 Sept. 2019, 2019, Page(s) 644-649, ISBN 978-1-7281-0594-9
Éditeur: IEEE
DOI: 10.1109/emceurope.2019.8871458

THE RACER: MANUFACTURING AND TESTING

Auteurs: Axel Fink, axel.fink@airbus.com, AIRBUS Helicopters (Germany) Martin Blacha, martin.blacha@airbus.com, AIRBUS Helicopters (Germany) Richard Miles,
Publié dans: 47th European Rotorcraft Forum,, 2021
Éditeur: ERF

Uncertainty analysis of the laminar boundary layer control TSSD concept

Auteurs: Alexander Barklage, Ulrich Römer, Arne Seitz, Matthias Horn, Rolf Radespiel, Peter Scholz and Camli Badrya
Publié dans: 2022
Éditeur: AIAA
DOI: 10.2514/6.2022-3551

CFD Wind Tunnel Assessment on the case study of the MOTHIF Blown Flap CFD Wind Tunnel Assessment on the case study of the MOTHIF Blown Flap

Auteurs: P. D'Alesio; G. Travostino; P. Planquart; G. Glabeke
Publié dans: 11th EASN Conference, 2021
Éditeur: EASN

AN AUTOMATED ASSESSEMENT TOOL OF NLF CRITERIA FOR AIRFRAME JOINTS

Auteurs: Sascha Dähne, Olaf Steffen, Jens Kosmann, Christian Hühne
Publié dans: 2022
Éditeur: DGLR Deutsche Gesellschaft für Luft- und Raumfahrt

Barely visible impact damage detection and location on composite materials by surface mounted and embedded aerospace-compatible optical fibre Bragg grating sensors

Auteurs: Sidney Goossens, Thomas Geernaert, Zahra Sharif Khodaei, Evangelos Karachalios, Diego Saenz-Castillo, Francis Berghmans
Publié dans: SPIE Photonics Europe 2020, Numéro 29/03/2020 - 03/04/2020, 2020
Éditeur: SPIE
DOI: 10.1117/12.2559262

Design of a composite aircraft nose wheel for a regional aircraft

Auteurs: Jens-David Wacker, Dominik Laveuve, Conchin Contell Asins, Andreas Büter
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro March 2021, 2020
Éditeur: IOP Publishing Ltd

SPATIAL SOUND SYSTEM TO AID INTERACTIVITY IN A HUMAN CENTRED DESIGN EVALUATION OF AN AIRCRAFT CABIN ENVIRONMENT.

Auteurs: Sandhya Santhosh , Martino C. Moruzzi, Francesca De Crescenzio, Sara Bagassi
Publié dans: XXVI AIDAA International Congress August 31st -September 3rd 2021 Proceedings, 2021, ISBN 9791259560421
Éditeur: Casa Editrice Paolo Emilio Persiani

Control of Laminar turbulent transition using wall suction through a porous metal foam

Auteurs: B. Egreteau, J. Methel, F. Méry, O. Vermeersch, C. Davoine, M. Forte, M. Thomas
Publié dans: 2020
Éditeur: ISAE SPAERO

Airbus Helicopters focuses on maintaining Racer’s pace

Auteurs: Chief Engineer of RACER, MAKINADJIAN, Brice <brice.makinadjian@airbus.com>
Publié dans: Flight International, Numéro 5th May 2020, 2020, Page(s) 17
Éditeur: Chief Engineer of RACER

Wind Tunnel Verification of Laminar Boundary Layer Control TSSD Concept

Auteurs: Arne Seitz, Matthias Horn
Publié dans: 2022
Éditeur: AIAA
DOI: 10.2514/6.2022-3552

Application of the partial Dirichlet-Neumann contact algorithm to simulate low-velocity impact events on composite structures

Auteurs: G. Guillamet, A. Quintanas-Corominas, M. Rivero, G. Houzeaux, M. Vázquez, A. Turon
Publié dans: 2022
Éditeur: Elsevier
DOI: 10.1016/j.compositesa.2022.107424

Aerothermal computations for laminar–turbulent transition onset measurement using infrared imaging technique

Auteurs: Lalande M., Vermeersch O., Méry F., Reulet P., et Forte M
Publié dans: 2023
Éditeur: AIAA Journal, Vol. 61, N°1
DOI: 10.2514/1.j062048

Digital Clone Testing Platform for the Assessment of SHM Systems under Uncertainty

Auteurs: I. N. Giannakeas, Z. Sharif Khodaei and M.H. Aliabadi
Publié dans: 2022
Éditeur: ELSEVIER

Active Noise Control for Aircraft Cabin Seats

Auteurs: Ignazio Dimino, Claudio Colangeli, Jacques Cuenca, Pasquale Vitiello, Mattia Barbarino
Publié dans: 2022
Éditeur: MDPI

Numerical aero-thermal modelling for improvement of infra-red measurement of laminar-turbulent transition

Auteurs: Lalande M., Vermeersch O., Méry F., Reulet P., et Forte M
Publié dans: 2022
Éditeur: ISAE SUPAERO Toulouse, FRANCE

Whole-Body Vibration Experienced by Pilots, Passengers and Crew in Fixed-Wing Aircraft: A State-of-the-Science Review

Auteurs: Neil J. Mansfield, Geetika Aggarwal
Publié dans: 2022
Éditeur: MDPI
DOI: 10.3390/vibration5010007

Hot stamping of aerospace aluminium alloys: Automotive technologies for the aeronautics industry

Auteurs: G Atxaga*, A. Arroyo and B. Canflanca
Publié dans: 2022
Éditeur: Journal - Elsevier

Manufacturing of a porous metallic panel by spark plasma sintering for hybrid laminar flow control application

Auteurs: B. Egreteau, C. Davoine, F. Méry, O. Vermeersch, M. Thomas
Publié dans: 2022
Éditeur: EPMA Lyon

Élaboration d’un panneau métallique poreux par frittage flash pour dispositif de contrôle de couche limite

Auteurs: B. Egreteau, C. Davoine, F. Méry, O. Vermeersch, M. Thomas
Publié dans: 2022
Éditeur: Fédération Française des Matériaux

Measurement Platform for Structural Health Monitoring Application of Large Scale Structures

Auteurs: F. Lambinet, Z. Sharif Khodaei
Publié dans: 2022
Éditeur: ELSEVIER

A parallel algorithm for unilateral contact problems

Auteurs: G. Guillamet, M. Rivero, M. Zavala-Aké, M. Vázquez, G. Houzeaux, S. Oller
Publié dans: Computers and Structures, 2022
Éditeur: Elsevier
DOI: 10.1016/j.compstruc.2022.106862

Alta velocidad en ala rotatoria, concepto de helicóptero compuesto.

Auteurs: Juan Manuel Jiménez
Publié dans: Boletín de Observación Tecnológica en Defensa, 2021, ISSN 2444-4839
Éditeur: Ministerio de Defensa. Secretaría General Técnica.

Die Material Selection Criteria for Aluminum Hot Stamping

Auteurs: Muro M., Aseguinolaza I., Artola G.
Publié dans: Die Material Selection Criteria for Aluminum Hot Stamping, 2021, ISSN 2504-4494
Éditeur: MDPI
DOI: 10.3390/jmmp5010015

Experimental and numerical study on wall impedance effects on Tollmien-Schlichting waves

Auteurs: A. Rouvière, F. Mery, O. Vermeersch, J. Methel, M. Forte
Publié dans: AAIA Journal, 2021, ISSN 1533-385X
Éditeur: AIAA

Effect of Hot-Wet Storage Aging on Static and Fatigue Response of a Woven Thermoplastic Polymer

Auteurs: Theofanis S. Plagianakos, Kirsa Muñoz, Diego Saenz-Castillo, Maria Mora Mendias, Miguel Jiménez and Vasileios Prentzias
Publié dans: Aerospace 2020, 7, 18, Numéro 24-02-2020, 2020, Page(s) https://www.mdpi.com/2226-4310/7/2/18, ISSN 2226-4310
Éditeur: MDPI

DESIGNING FOR AUTOMATED COMPOSITES MANUFACTURING OF LOW-VOLUME AEROSTRUCTURES

Auteurs: Jeff Sloan
Publié dans: Composites World, 2021, ISSN 2376-5240
Éditeur: CompositesWorld Magazine

Interpolatory methods for generic BizJet gust load alleviation function

Auteurs: C. Poussot-Vassal, P. Vuillemin, O. Cantinaud and F. Sève,
Publié dans: SIAM Journal on Applied Dynamical Systems, Numéro November 2021, 2021, Page(s) 2391–2411, ISSN 1536-0040
Éditeur: Society of Industrial and Applied Mathematics
DOI: 10.1137/20m1384014

Design of a morphing leading edge as a high lift device for a regional aircraft

Auteurs: C Contell Asins, V Landersheim, J-D Wacker, S Adachi, S Arnold-Keifer, M May
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 1024/1, 2021, Page(s) 012033, ISSN 1757-8981
Éditeur: IOP Publishing Ltd
DOI: 10.1088/1757-899x/1024/1/012033

Droits de propriété intellectuelle

Theoretical knowledge on aircraft systems fluids behaviour under leakage conditions

Numéro de demande/publication: EF 132
Date: 2020-12-31
Demandeur(s): AERTEC SOLUTIONS SL

Mixed reality application integrated to test software

Numéro de demande/publication: EF 136
Date: 2020-12-31

Dongle AIM, miniaturized, handheld, scalable, configurable, wireless communication capable version of an Aircraft Interface Module used for interfacing an aircraft for ground testing

Numéro de demande/publication: EF 133
Date: 2020-12-31
Demandeur(s): AERTEC SOLUTIONS SL

Advanced Hole-to-Hole assembly process

Numéro de demande/publication: EF 113
Date: 2020-12-31

Cockpit mock up for ergonomic testing

Numéro de demande/publication: EF 135
Date: 2020-12-31
Demandeur(s): ALMADESIGN CONCEITO E DESENVOLVIMENTO DE DESIGN LDA

Improvement of manufacturing processes: Liquid Resin Infusion (LRI) for more eco-friendly production of composite structural parts

Numéro de demande/publication: EF 131
Date: 2020-12-31
Demandeur(s): ELLINIKI AEROPORIKI VIOMICHANIA ANONYMI ETAIREIA

Advanced Hole-to-Hole assembly process

Numéro de demande/publication: EF 113
Date: 2020-12-31

Cockpit mock up for ergonomic testing

Numéro de demande/publication: EF 135
Date: 2020-12-31
Demandeur(s): ALMADESIGN CONCEITO E DESENVOLVIMENTO DE DESIGN LDA

Improvement of manufacturing processes: Liquid Resin Infusion (LRI) for more eco-friendly production of composite structural parts

Numéro de demande/publication: EF 131
Date: 2020-12-31

Dongle AIM, miniaturized, handheld, scalable, configurable, wireless communication capable version of an Aircraft Interface Module used for interfacing an aircraft for ground testing

Numéro de demande/publication: EF 133
Date: 2020-12-31
Demandeur(s): AERTEC SOLUTIONS SL

Cockpit mock up for ergonomic testing

Numéro de demande/publication: EF 135
Date: 2020-12-31
Demandeur(s): ALMADESIGN CONCEITO E DESENVOLVIMENTO DE DESIGN LDA

Dongle AIM, miniaturized, handheld, scalable, configurable, wireless communication capable version of an Aircraft Interface Module used for interfacing an aircraft for ground testing

Numéro de demande/publication: EF 133
Date: 2020-12-31
Demandeur(s): AERTEC SOLUTIONS SL

Improvement of manufacturing processes: Liquid Resin Infusion (LRI) for more eco-friendly production of composite structural parts

Numéro de demande/publication: EF 131
Date: 2020-12-31

Theoretical knowledge on aircraft systems fluids behaviour under leakage conditions

Numéro de demande/publication: EF 132
Date: 2020-12-31
Demandeur(s): AERTEC SOLUTIONS SL

Mixed reality application integrated to test software

Numéro de demande/publication: EF 136
Date: 2020-12-31

Advanced Hole-to-Hole assembly process

Numéro de demande/publication: EF 113
Date: 2020-12-31

Theoretical knowledge on aircraft systems fluids behaviour under leakage conditions

Numéro de demande/publication: EF 132
Date: 2020-12-31
Demandeur(s): AERTEC SOLUTIONS SL

Mixed reality application integrated to test software

Numéro de demande/publication: EF 136
Date: 2020-12-31

Armierung von Fensterprofilen

Numéro de demande/publication: 20 200723
Date: 2002-01-18

Armierung von Fensterprofilen

Numéro de demande/publication: 20 200723
Date: 2002-01-18

Armierung von Fensterprofilen

Numéro de demande/publication: 20 200723
Date: 2002-01-18

Recherche de données OpenAIRE...

Livrables

Publications

Droits de propriété intellectuelle

Partager cette page

Télécharger