CORDIS - Forschungsergebnisse der EU
CORDIS

AIRFRAME ITD

Leistungen

2022 D&C plan update

Dissemination and Communication Plan updated for 2022

2020 D&C plan update

Dissemination and Communication Plan updated for 2020

2020 D&C plan update

Dissemination and Communication Plan updated for 2020

2021 D&C plan update

Dissemination and Communication Plan updated for 2021

2021 D&C plan update

Dissemination and Communication Plan updated for 2021

2023 D&C plan update

Dissemination and Communication Plan updated for 2023

Veröffentlichungen

Flat inkjet-printed copper induction coils for magnetostrictive structural health monitoring: A comparison with bulk air coils and an anisotropic magnetoresistive sensor (AMR) sensor

Autoren: Gullapalli A, Beedasy V, Vincent JDS, Leong Z, Smith P, Morley N
Veröffentlicht in: Advanced Engineering Materials, 2021, ISSN 1438-1656
Herausgeber: John Wiley & Sons Ltd.
DOI: 10.1002/adem.202100313

The Effect of Post-Processing on the Mechanical Behavior of Ti6Al4V Manufactured by Electron Beam Powder Bed Fusion for General Aviation Primary Structural Applications

Autoren: Carmine Pirozzi, Stefania Franchitti, Rosario Borrelli, Antonio Chiariello, Luigi Di Palma
Veröffentlicht in: Aerospace, Ausgabe 7/6, 2020, Seite(n) 75, ISSN 2226-4310
Herausgeber: MDPI
DOI: 10.3390/aerospace7060075

Towards exceptional icephobicity with chionophile-inspired durable biomimetic coatings

Autoren: Halar Memon, Davide S.A. De Focatiis, Kwing-So Choi, and Xianghui Hou
Veröffentlicht in: ACS Applied Polymer Materials, 2021, ISSN 2637-6105
Herausgeber: ACS
DOI: 10.1021/acsapm.1c00623

Effect of some riveting process parameters on the fatigue life of double-shear lap joints

Autoren: Jan Papuga, Jiří Stejskal
Veröffentlicht in: ScienceDirect.com, 2021, ISSN 1880-3989
Herausgeber: elsevier.com
DOI: 10.1016/j.engfailanal.2021.106008

Fatigue crack growth for through and part-through cracks in additively manufactured Ti6Al4V

Autoren: M. Kahlin, H. Ansell, J. Moverare
Veröffentlicht in: International Journal of Fatigue, 2021, ISSN 0142-1123
Herausgeber: Elsevier BV
DOI: 10.1016/j.ijfatigue.2021.106608

Experimental investigation of damage detection on structures with friction stir welding (FSW) junctions

Autoren: A Sorrentino, A Chiariello, L Di Palma, A De Fenza
Veröffentlicht in: IOP Conference Series: Materials Science and Engineering, Ausgabe 1024/1, 2021, Seite(n) 012031, ISSN 1757-8981
Herausgeber: IOP Publishing Ltd
DOI: 10.1088/1757-899x/1024/1/012031

PREDICTIVE CAPACITY OF FDTD METHOD EMBEDDING MTLN TECHNIQUE FOR LIGHTNING AND HIRF THREATS

Autoren: Guadalupe Gutierrez Gutierrez, Tim McDonald, Carlos Rodriguez Paños, Raul Molero Castejon, Hugo Tavares, Hirahi Galindo Perez, Enrique Pascual-Gil
Veröffentlicht in: Progress In Electromagnetics Research C, Ausgabe 107, 2021, Seite(n) 33-47, ISSN 1937-8718
Herausgeber: EMW Publishing
DOI: 10.2528/pierc20092006

Aircraft interior and seat design: priorities based on passengers’ opinions

Autoren: Vink, P., Vledder, G., Song, Y., Herbig, B., Reichherzer, A. S., & Mansfield, N.
Veröffentlicht in: International Journal of Aviation, Aeronautics, and Aerospace, 2022, ISSN 2374-6793
Herausgeber: n/a

Model validation for a transient ECS failure case in a business jet mock-up

Autoren: A.J. M.Lindner, M. Pschirer and V. Norrefeldt
Veröffentlicht in: IOP Conference, 2022, ISSN 1757-899X
Herausgeber: IOP Conference
DOI: 10.1088/1757-899x/1226/1/012110

Implementation of dimensional management methodology and optimisation algorithms for pre-drilled hinge line interfaces of critical aero assemblies – A case study

Autoren: Konstantinos C Bacharoudis, David Bainbridge, Alison Turner, Atanas A Popov, Svetan M Ratchev
Veröffentlicht in: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Ausgabe Ausgabe 14, December 2020, 2020, Seite(n) 095440542097810, ISSN 0954-4054
Herausgeber: Professional Engineering Publishing Ltd.
DOI: 10.1177/0954405420978101

Role of surface finishing and interfacial lacquer layer on particle erosion mechanisms of Ti/TiN multilayer PVD coatings for carbon fibre reinforced polymer substrates protection

Autoren: Borja Coto, Lucía Mendizabal, Francesco Pagano, Hans Kling, Itziar Azpitarte, Javier Barriga, Linnea Selegård
Veröffentlicht in: Materials Letters, Ausgabe 285, 2021, Seite(n) 129187, ISSN 0167-577X
Herausgeber: Elsevier BV
DOI: 10.1016/j.matlet.2020.129187

Spectral Verification of the Mechanisms behind FBG-Based Ultrasonic Guided Wave Detection

Autoren: Sidney Goossens, Francis Berghmans, Thomas Geernaert
Veröffentlicht in: Sensors, Ausgabe 20/22, 2020, Seite(n) 6571, ISSN 1424-8220
Herausgeber: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s20226571

Novel multi-zone self-heated composites tool for out-of-autoclave aerospace components manufacturing

Autoren: Nithin Jayasree, Sadik Omairey and Mihalis Kazilas
Veröffentlicht in: Science and Engineering of Composite Materials, Ausgabe Volume 27: Ausgabe 1, 2020, Seite(n) 325–334, ISSN 2191-0359
Herausgeber: De Gruyter
DOI: 10.1515/secm-2020-0033

High-rate in-plane shear testing of IM7/8552 using the Split Hopkinson Tension Bar

Autoren: Noah Ledford, Mathieu Imbert, Michael May
Veröffentlicht in: AIAA Journal, 2021, ISSN 1533-385X
Herausgeber: AIAA
DOI: 10.2514/1.j060269

Comparative study on the influence of surface characteristics on de-icing evaluation

Autoren: Xianghui Hou
Veröffentlicht in: Journal of Materials Science, 2021, ISSN 1573-4803
Herausgeber: Springer
DOI: 10.1007/s10853-021-06407-x

Flame retardant investigations on carbon fibre-reinforced polyurethane resin parts for aircraft applications produced by wet compression moulding

Autoren: Carl-Christoph Höhne
Veröffentlicht in: Fire and Materials, 2021, ISSN 1097-0037
Herausgeber: Willey
DOI: 10.1002/fam.2965

Effects of hot-wet storage aging, CNT-integration and damping layer interposition on static and fatigue interlaminar shear response of a UD Graphite/Epoxy material system

Autoren: Theofanis S. Plagianakos, Kirsa Muñoz, Stylianos Strapatsakis, Maria del Mar Fernandez, Miguel Jimenez, Evangelos Karachalios
Veröffentlicht in: Materials Today Communications, Ausgabe 25, 2020, Seite(n) 101296, ISSN 2352-4928
Herausgeber: Elsevier BV
DOI: 10.1016/j.mtcomm.2020.101296

Acoustic Improvements of Aircraft Headrests Based on Electrospun Mats Evaluated Through Boundary Element Method

Autoren: Venanzio Giannella, Francesco Branda, Jessica Passaro, Giuseppe Petrone, Mattia Barbarino, Roberto Citarella
Veröffentlicht in: Applied Sciences, Ausgabe 10/16, 2020, Seite(n) 5712, ISSN 2076-3417
Herausgeber: MDPI
DOI: 10.3390/app10165712

On the influence of two-dimensional hump roughness on laminar–turbulent transition

Autoren: Juan Alberto Franco Sumariva, Stefan Hein, Eusebio Valero
Veröffentlicht in: Physics of Fluids, Ausgabe 32/3, 2020, Seite(n) 034102, ISSN 1070-6631
Herausgeber: American Institute of Physics
DOI: 10.1063/1.5131577

Experimental/numerical Acoustic Assessment of Aircraft Seat Headrests based on Electrospun Mats

Autoren: Venanzio Giannella, Claudio Colangeli, Jacques Cuenca, Mattia Barbarino
Veröffentlicht in: Applied Sciences, 2021, ISSN 2078-2489
Herausgeber: Multidisciplinary Digital Publishing Institute (MDPI)

Thin-walled Integral Constructions in Aircraft Industry

Autoren: Paweł Bałon, Edward Rejman, Andrzej Świątoniowski, Bartłomiej Kiełbasa, Robert Smusz, Janusz Szostak, Jacek Cieślik, Łukasz Kowalski
Veröffentlicht in: Procedia Manufacturing, Ausgabe 47, 2020, Seite(n) 498-504, ISSN 2351-9789
Herausgeber: ELSEVIER
DOI: 10.1016/j.promfg.2020.04.153

A global assessment of barely visible impact damage for CFRP sub-components with FBG-based sensors

Autoren: Sidney Goossens, Francis Berghmans, Kirsa Muñoz, Miguel Jiménez, Evangelos Karachalios, Diego Saenz-Castillo, Thomas Geernaert
Veröffentlicht in: Elsevier Composite Structures, 2021, ISSN 0263-8223
Herausgeber: Elsevier BV
DOI: 10.1016/j.compstruct.2021.114025

Practicalities of BVID detection on aerospace-grade CFRP materials with optical fibre sensors

Autoren: Sidney Goossens, Francis Berghmans, Zahra Sharif Khodaei, Florian Lambinet, Evangelos Karachalios, Diego Saenz-Castillo, Thomas Geernaert
Veröffentlicht in: Composite Structures, Ausgabe 259, 2021, Seite(n) 113243, ISSN 0263-8223
Herausgeber: Elsevier BV
DOI: 10.1016/j.compstruct.2020.113243

Improved fatigue strength of additively manufactured Ti6Al4V by surface post processing

Autoren: M. Kahlin, H. Ansell, D. Basu, A. Kerwin, L. Newton, B. Smith, J.J. Moverare
Veröffentlicht in: International Journal of Fatigue, Ausgabe 134, 2020, Seite(n) 105497, ISSN 0142-1123
Herausgeber: Elsevier BV
DOI: 10.1016/j.ijfatigue.2020.105497

Damage detection & localization on composite patch repair under different environmental effects

Autoren: Florian Lambinet, Zahra Sharif Khodaei
Veröffentlicht in: Engineering Research Express, Ausgabe 2/4, 2020, Seite(n) 045032, ISSN 2631-8695
Herausgeber: IoP Science
DOI: 10.1088/2631-8695/abd0d3

The effect of local copper mesh geometry on the damage induced in composite structures subjected to artificial lightning strike

Autoren: Michael May, Jürgen Kuder, Philipp Hahn, Matti Isakov, Sebastian Schopferer
Veröffentlicht in: AIAA Journal, 2021, ISSN 1533-385X
Herausgeber: AIAA
DOI: 10.2514/6.2021-0100

LRI-fabricated composite demonstrators for an aircraft fuselage on the basis of a Building Block design approach

Autoren: Evangelos Karachalios, Kirsa Muñoz, Miguel Jimenez, Vasileios Prentzias, Sidney Goosséns, Thomas Geernaert, Theofanis S. Plagianakos
Veröffentlicht in: Composites Part C: Open Access, 2021, ISSN 2666-6820
Herausgeber: Elsevier
DOI: 10.1016/j.jcomc.2021.100178

Damage detection in large composite stiffened panels based on a novel SHM building block philosophy

Autoren: Nan Yue, Zahra Sharif Khodaei, M H Aliabadi
Veröffentlicht in: Smart Materials and Structures, Ausgabe 30/4, 2021, Seite(n) 045004, ISSN 0964-1726
Herausgeber: Institute of Physics Publishing
DOI: 10.1088/1361-665x/abe4b4

Effect of Hot-Wet Storage Aging on Mechanical Response of a Woven Thermoplastic Composite

Autoren: Theofanis S. Plagianakos, Kirsa Muñoz, Diego Saenz-Castillo, Maria Mora Mendias, Miguel Jiménez, Vasileios Prentzias
Veröffentlicht in: Aerospace, Ausgabe 7/2, 2020, Seite(n) 18, ISSN 2226-4310
Herausgeber: MDPI
DOI: 10.3390/aerospace7020018

Variable amplitude loading of additively manufactured Ti6Al4V subjected to surface post processes

Autoren: M. Kahlin, H. Ansell, A. Kerwin, B. Smith, J. Moverare
Veröffentlicht in: International Journal of Fatigue, Ausgabe 142, 2021, Seite(n) 105945, ISSN 0142-1123
Herausgeber: Elsevier BV
DOI: 10.1016/j.ijfatigue.2020.105945

Integrated fabrication of novel inkjet-printed silver nanoparticle sensors on carbon fiber reinforced nylon composites

Autoren: Karas B, Beedasy V, Leong Z, Morley NA, Mumtaz K, Smith PJ
Veröffentlicht in: Micromachines , 2021, ISSN 2072-666X
Herausgeber: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi12101185

Intrinsic dependence of ice adhesion strength on surface roughness

Autoren: Halar Memon, Junpeng Liu, Davide S.A. De Focatiis, Kwing-so Choi, Xianghui Hou
Veröffentlicht in: Surface and Coatings Technology, Ausgabe 385, 2020, Seite(n) 125382, ISSN 0257-8972
Herausgeber: Elsevier BV
DOI: 10.1016/j.surfcoat.2020.125382

Particle and rain erosion mechanisms on Ti/TiN multilayer PVD coatings for carbon fibre reinforced polymer substrates protection

Autoren: Borja Coto, Per Hallander, Lucía Mendizabal, Francesco Pagano, Hans Kling, Rocío Ortiz, Javier Barriga, Linnéa Selegård
Veröffentlicht in: Wear, Ausgabe 466-467, 2021, Seite(n) 203575, ISSN 0043-1648
Herausgeber: Elsevier BV
DOI: 10.1016/j.wear.2020.203575

Development of Hybrid Piezoelectric-Fibre Optic Composite Patch Repair Solutions

Autoren: Florian Lambinet & Zahra Sharif Khodaei
Veröffentlicht in: Sensors Journal, 2021, ISSN 1424-8220
Herausgeber: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s21155131

Experimental Characterization of Aircraft Electromagnetic Protections

Autoren: D. Krutilek (EVE); Z. Raida (BUT); J. Drinovsky (BUT)
Veröffentlicht in: Radioengineering Journal, 2021, ISSN 1210-2512
Herausgeber: Brno University of Technology
DOI: 10.13164/re.2021.0654

Designing ferrite impregnated epoxy actuators for impact damage detection in carbon fibre reinforced composites

Autoren: Surakarnkha J, Zhaoyuan L, Gong P, Holmes W, Desai P, Foreman J, Morley N
Veröffentlicht in: Composites Science and Technology , 2021, ISSN 1880-3989
Herausgeber: Elsevier BV
DOI: 10.1016/j.compscitech.2021.109085

Development of methods for designing and manufacturing aircraft components with additive technologies

Autoren: Włodzimierz Adamski, Janusz Michalcewicz
Veröffentlicht in: Mechanik, Ausgabe 93/3, 2020, Seite(n) 8-14, ISSN 0025-6552
Herausgeber: http://eng.mechanik.media.pl/about-mechanik.html
DOI: 10.17814/mechanik.2020.3.7

Aerodynamic Design of Airfoil Shape for Gust Generation in a Transonic Wind Tunnel

Autoren: N. Natale, · S. Russo, · S. Dequand, · A. Lepage, · N. Paletta
Veröffentlicht in: Aerotecnica Missili & Spazio, 2021, ISSN 0365-7442
Herausgeber: Springer

Analysis and design of a leading edge with morphing capabilities for the wing of a regional aircraft – gapless chord- and camber-increase for high-lift performance

Autoren: Conchin Contell Asins, Volker Landersheim, Dominik Laveuve, Seiji Adachi, Michael May, Jens-David Wacker, Julia Decker
Veröffentlicht in: Applied Sciences, 2021, ISSN 2078-2489
Herausgeber: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/app11062752

The DressMAN 3.2-System for evaluation of thermal comfort in the Passenger Cabin Ground Demonstrator

Autoren: Michael Visser, Sumee Park, Sebastian Stratbücker, Victor Norrefeldt, Andreas Lindner
Veröffentlicht in: Materials Science and Engineering 1226 (2022) 012114, 2022, ISSN 1757-899X
Herausgeber: IOP Conference
DOI: 10.1088/1757-899x/1226/1/012114

Investigation of the impact of a particle foam insulation on frost buildup on the aircraft structure

Autoren: Victor Norrefeldt and Gerhard Riedl
Veröffentlicht in: IOP Conference Series, 2022, ISSN 1757-899X
Herausgeber: IOP Publishing Ltd

Damage resistance of composite structures with unsymmetrical stacking sequence subjected to high velocity bird impact

Autoren: Michael May, Sonja Arnold-Keifer, Thomas Haase
Veröffentlicht in: Composites Part C: Open Access, Ausgabe 1, 2020, Seite(n) 100002, ISSN 2666-6820
Herausgeber: Elsevier
DOI: 10.1016/j.jcomc.2020.100002

Durability enhancement of low ice adhesion polymeric coatings

Autoren: Halar Memon, Davide S.A. De Focatiis, Kwing-So Choi, Xianghui Hou
Veröffentlicht in: Progress in Organic Coatings, Ausgabe 151, 2021, Seite(n) 106033, ISSN 0300-9440
Herausgeber: Elsevier BV
DOI: 10.1016/j.porgcoat.2020.106033

Superhydrophobic Coatings as Anti-Icing Systems for Small Aircraft

Autoren: Filomena Piscitelli, Antonio Chiariello, Dariusz Dabkowski, Gianluca Corraro, Francesco Marra, Luigi Di Palma
Veröffentlicht in: Aerospace, Ausgabe 7/1, 2020, Seite(n) 2, ISSN 2226-4310
Herausgeber: MDPI
DOI: 10.3390/aerospace7010002

Design and Development of Magnetostrictive Actuators and Sensors for Structural Health Monitoring

Autoren: Jamin Daniel Selvakumar Vincent, Michelle Rodrigues, Zhaoyuan Leong, Nicola A. Morley
Veröffentlicht in: Sensors, Ausgabe 20/3, 2020, Seite(n) 711, ISSN 1424-8220
Herausgeber: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s20030711

Effect of increased cabin recirculation airflow fraction on relative humidity, CO2 and TVOC

Autoren: Victor Norrefeldt, Florian Mayer, Britta Herbig, Ria StrÖhlein
Veröffentlicht in: IOP Conference Series, 2022, ISSN 1757-899x
Herausgeber: IOP Conference

Digital Clone Testing Platform for the Assessment of SHM Systems under Uncertainty

Autoren: I. N. Giannakeas, Z. Sharif Khodaei and M.H. Aliabadi
Veröffentlicht in: Mechanical Systems and Signal Processing, 2021, ISSN 0888-3270
Herausgeber: Academic Press

Preliminary user centred evaluation of regional aircraft cabin interiors in virtual reality

Autoren: De Crescenzio F.; Bagassi S.; Starita F.
Veröffentlicht in: SCIENTIFIC REPORTS, Ausgabe 11, 2021, Seite(n) 1-10, ISSN 2045-2322
Herausgeber: Nature Publishing Group
DOI: 10.1038/s41598-021-89098-3

Bird Strike Resistance of a CFRP Morphing Leading Edge

Autoren: Michael May, Sonja Arnold-Keifer, Volker Landersheim, Dominik Laveuve, Conchin Contell Asins, Mathieu Imbert
Veröffentlicht in: Composites Part C: Open Access, 2021, ISSN 2666-6820
Herausgeber: Elsevier
DOI: 10.1016/j.jcomc.2021.100115

Design of a Morphing Leading Edge for use as a High Lift Device for a Regional Aircraft

Autoren: Volker Landersheim, Conchin Contell Asins, Jens-David Wacker, Seiji Adachi, Sonja Arnold-Keifer, Michael May
Veröffentlicht in: IOP Conference Series: Materials Science and Engineering, 2021
Herausgeber: IOP Publishing Ltd
DOI: 10.1088/1757-899x/1024/1/012033

Sustainability-oriented topology optimization of aircraft components and best practices in LPBF-based metal additive manufacturing

Autoren: Klaus Hoschke, Konstantin Kappe, Sankalp Patil, Aron Pfaff, Michael May, Jens Osterholz
Veröffentlicht in: 2022
Herausgeber: 3AF

OPTICAL FIBRE BRAGG GRATING SENSORS FOR BVID DETECTION ON COMPOSITE SUB-COMPONENTS

Autoren: S. Goossens, T. Geernaert, K. Muñoz, M. Jiménez, E. Karachalios, D. Saenz-Castillo, F. Berghmans
Veröffentlicht in: 3AF Aerospace Europe Conference 2020, Ausgabe 25-28/02/2020, 2020
Herausgeber: 3AF

Multidimensional Design Assessment Model for eco-efficiency and efficiency in aeronautical assembly processes

Autoren: E.J. Lourenco, M. Oliva, M.A. Estrela, A. J. Baptista
Veröffentlicht in: 2019 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC), Ausgabe 17-19/06 2019, 2019, Seite(n) 1-9, ISBN 978-1-7281-3401-7
Herausgeber: IEEE
DOI: 10.1109/ice.2019.8792641

Analysis and Uncertainty Quantification of a Hybrid Laminar Flow Control System

Autoren: Alexander Barklage, Ulrich Römer ORCID Icon, Anna Bertram, Philipp Bekemeyer, Jan Himisch, Rolf Radespiel and Camli Badrya
Veröffentlicht in: 2022
Herausgeber: AIAA
DOI: 10.2514/6.2022-2452

Numerical Studies on the Influence of Step-Like Surface Irregularities on the Development of Tollmien-Schlichting Waves

Autoren: A. Franco, S. Hein
Veröffentlicht in: IUTAM Laminar-Turbulent Transition. IUTAM Bookseries, 2021
Herausgeber: Springer, Sherwin S., Schmid P., Wu X. (eds)
DOI: 10.1007/978-3-030-67902-6_64

Defining the Potential of Extended Reality Tools for Implementing Co-creation of User Oriented Products and Systems

Autoren: Santhosh; De Crescenzio; Vitolo
Veröffentlicht in: Design Tools and Methods in Industrial Engineering II. ADM 2021. Lecture Notes in Mechanical Engineering., 2022, Seite(n) 165-174, ISBN 978-3-030-91233-8
Herausgeber: Springer Nature
DOI: 10.1007/978-3-030-91234-5_17

Challenges of complex monitoring of the curing parameters in coupons for LRI manufacturing

Autoren: A. Torre-Poza, A. M. R. Pinto, T. Grandal, N. González-Castro, L. Carral, E. Rodríguez-Senín
Veröffentlicht in: INCAS BULLETIN, Volume 13, Ausgabe 1/ 2021, 2021
Herausgeber: INCAS – National Institute for Aerospace Research “Elie Carafoli”
DOI: 10.13111/2066-8201.2021.13.1.21

High-rate in-plane shear testing of CFRP using the Split Hopkinson Tension Bar

Autoren: Noah Ledford, Mathieu Imbert, Michael May
Veröffentlicht in: 2021 AIAA SciTech Forum and Exposition, 2021
Herausgeber: AIAA
DOI: 10.2514/6.2021-0167

Large-Sclae Wind Tunnel Testing of an Advanced Hybrid Laminar Flow Control System

Autoren: Peter Scholz, Alexander Barklage, Bart van Rooijen, Arne Seitz, Matthias Horn, Camli Badrya, Rolf Radespiel
Veröffentlicht in: German Aeorospace Conference, 2022
Herausgeber: Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V.
DOI: 10.25967/570065

Lightning Low Level vs High Level Direct Current Injection Tests on a Full Scale Aircraft Cockpit

Autoren: Fernando Cano Perez, Guadalupe Gutierrez Gutierrez, Hugo Tavares, Abderrahim Khamlichi, Josefina Menendez Alberquilla, Raul Molero Castejon, Nelson Matos, Angel Ramirez Linares
Veröffentlicht in: 2019 International Symposium on Electromagnetic Compatibility - EMC EUROPE, Ausgabe 2-6 Sept. 2019, 2019, Seite(n) 644-649, ISBN 978-1-7281-0594-9
Herausgeber: IEEE
DOI: 10.1109/emceurope.2019.8871458

THE RACER: MANUFACTURING AND TESTING

Autoren: Axel Fink, axel.fink@airbus.com, AIRBUS Helicopters (Germany) Martin Blacha, martin.blacha@airbus.com, AIRBUS Helicopters (Germany) Richard Miles,
Veröffentlicht in: 47th European Rotorcraft Forum,, 2021
Herausgeber: ERF

Uncertainty analysis of the laminar boundary layer control TSSD concept

Autoren: Alexander Barklage, Ulrich Römer, Arne Seitz, Matthias Horn, Rolf Radespiel, Peter Scholz and Camli Badrya
Veröffentlicht in: 2022
Herausgeber: AIAA
DOI: 10.2514/6.2022-3551

CFD Wind Tunnel Assessment on the case study of the MOTHIF Blown Flap CFD Wind Tunnel Assessment on the case study of the MOTHIF Blown Flap

Autoren: P. D'Alesio; G. Travostino; P. Planquart; G. Glabeke
Veröffentlicht in: 11th EASN Conference, 2021
Herausgeber: EASN

AN AUTOMATED ASSESSEMENT TOOL OF NLF CRITERIA FOR AIRFRAME JOINTS

Autoren: Sascha Dähne, Olaf Steffen, Jens Kosmann, Christian Hühne
Veröffentlicht in: 2022
Herausgeber: DGLR Deutsche Gesellschaft für Luft- und Raumfahrt

Barely visible impact damage detection and location on composite materials by surface mounted and embedded aerospace-compatible optical fibre Bragg grating sensors

Autoren: Sidney Goossens, Thomas Geernaert, Zahra Sharif Khodaei, Evangelos Karachalios, Diego Saenz-Castillo, Francis Berghmans
Veröffentlicht in: SPIE Photonics Europe 2020, Ausgabe 29/03/2020 - 03/04/2020, 2020
Herausgeber: SPIE
DOI: 10.1117/12.2559262

Design of a composite aircraft nose wheel for a regional aircraft

Autoren: Jens-David Wacker, Dominik Laveuve, Conchin Contell Asins, Andreas Büter
Veröffentlicht in: IOP Conference Series: Materials Science and Engineering, Ausgabe March 2021, 2020
Herausgeber: IOP Publishing Ltd

SPATIAL SOUND SYSTEM TO AID INTERACTIVITY IN A HUMAN CENTRED DESIGN EVALUATION OF AN AIRCRAFT CABIN ENVIRONMENT.

Autoren: Sandhya Santhosh , Martino C. Moruzzi, Francesca De Crescenzio, Sara Bagassi
Veröffentlicht in: XXVI AIDAA International Congress August 31st -September 3rd 2021 Proceedings, 2021, ISBN 9791259560421
Herausgeber: Casa Editrice Paolo Emilio Persiani

Control of Laminar turbulent transition using wall suction through a porous metal foam

Autoren: B. Egreteau, J. Methel, F. Méry, O. Vermeersch, C. Davoine, M. Forte, M. Thomas
Veröffentlicht in: 2020
Herausgeber: ISAE SPAERO

Airbus Helicopters focuses on maintaining Racer’s pace

Autoren: Chief Engineer of RACER, MAKINADJIAN, Brice <brice.makinadjian@airbus.com>
Veröffentlicht in: Flight International, Ausgabe 5th May 2020, 2020, Seite(n) 17
Herausgeber: Chief Engineer of RACER

Wind Tunnel Verification of Laminar Boundary Layer Control TSSD Concept

Autoren: Arne Seitz, Matthias Horn
Veröffentlicht in: 2022
Herausgeber: AIAA
DOI: 10.2514/6.2022-3552

Application of the partial Dirichlet-Neumann contact algorithm to simulate low-velocity impact events on composite structures

Autoren: G. Guillamet, A. Quintanas-Corominas, M. Rivero, G. Houzeaux, M. Vázquez, A. Turon
Veröffentlicht in: 2022
Herausgeber: Elsevier
DOI: 10.1016/j.compositesa.2022.107424

Aerothermal computations for laminar–turbulent transition onset measurement using infrared imaging technique

Autoren: Lalande M., Vermeersch O., Méry F., Reulet P., et Forte M
Veröffentlicht in: 2023
Herausgeber: AIAA Journal, Vol. 61, N°1
DOI: 10.2514/1.j062048

Digital Clone Testing Platform for the Assessment of SHM Systems under Uncertainty

Autoren: I. N. Giannakeas, Z. Sharif Khodaei and M.H. Aliabadi
Veröffentlicht in: 2022
Herausgeber: ELSEVIER

Active Noise Control for Aircraft Cabin Seats

Autoren: Ignazio Dimino, Claudio Colangeli, Jacques Cuenca, Pasquale Vitiello, Mattia Barbarino
Veröffentlicht in: 2022
Herausgeber: MDPI

Numerical aero-thermal modelling for improvement of infra-red measurement of laminar-turbulent transition

Autoren: Lalande M., Vermeersch O., Méry F., Reulet P., et Forte M
Veröffentlicht in: 2022
Herausgeber: ISAE SUPAERO Toulouse, FRANCE

Whole-Body Vibration Experienced by Pilots, Passengers and Crew in Fixed-Wing Aircraft: A State-of-the-Science Review

Autoren: Neil J. Mansfield, Geetika Aggarwal
Veröffentlicht in: 2022
Herausgeber: MDPI
DOI: 10.3390/vibration5010007

Hot stamping of aerospace aluminium alloys: Automotive technologies for the aeronautics industry

Autoren: G Atxaga*, A. Arroyo and B. Canflanca
Veröffentlicht in: 2022
Herausgeber: Journal - Elsevier

Manufacturing of a porous metallic panel by spark plasma sintering for hybrid laminar flow control application

Autoren: B. Egreteau, C. Davoine, F. Méry, O. Vermeersch, M. Thomas
Veröffentlicht in: 2022
Herausgeber: EPMA Lyon

Élaboration d’un panneau métallique poreux par frittage flash pour dispositif de contrôle de couche limite

Autoren: B. Egreteau, C. Davoine, F. Méry, O. Vermeersch, M. Thomas
Veröffentlicht in: 2022
Herausgeber: Fédération Française des Matériaux

Measurement Platform for Structural Health Monitoring Application of Large Scale Structures

Autoren: F. Lambinet, Z. Sharif Khodaei
Veröffentlicht in: 2022
Herausgeber: ELSEVIER

A parallel algorithm for unilateral contact problems

Autoren: G. Guillamet, M. Rivero, M. Zavala-Aké, M. Vázquez, G. Houzeaux, S. Oller
Veröffentlicht in: Computers and Structures, 2022
Herausgeber: Elsevier
DOI: 10.1016/j.compstruc.2022.106862

Alta velocidad en ala rotatoria, concepto de helicóptero compuesto.

Autoren: Juan Manuel Jiménez
Veröffentlicht in: Boletín de Observación Tecnológica en Defensa, 2021, ISSN 2444-4839
Herausgeber: Ministerio de Defensa. Secretaría General Técnica.

Die Material Selection Criteria for Aluminum Hot Stamping

Autoren: Muro M., Aseguinolaza I., Artola G.
Veröffentlicht in: Die Material Selection Criteria for Aluminum Hot Stamping, 2021, ISSN 2504-4494
Herausgeber: MDPI
DOI: 10.3390/jmmp5010015

Experimental and numerical study on wall impedance effects on Tollmien-Schlichting waves

Autoren: A. Rouvière, F. Mery, O. Vermeersch, J. Methel, M. Forte
Veröffentlicht in: AAIA Journal, 2021, ISSN 1533-385X
Herausgeber: AIAA

Effect of Hot-Wet Storage Aging on Static and Fatigue Response of a Woven Thermoplastic Polymer

Autoren: Theofanis S. Plagianakos, Kirsa Muñoz, Diego Saenz-Castillo, Maria Mora Mendias, Miguel Jiménez and Vasileios Prentzias
Veröffentlicht in: Aerospace 2020, 7, 18, Ausgabe 24-02-2020, 2020, Seite(n) https://www.mdpi.com/2226-4310/7/2/18, ISSN 2226-4310
Herausgeber: MDPI

DESIGNING FOR AUTOMATED COMPOSITES MANUFACTURING OF LOW-VOLUME AEROSTRUCTURES

Autoren: Jeff Sloan
Veröffentlicht in: Composites World, 2021, ISSN 2376-5240
Herausgeber: CompositesWorld Magazine

Interpolatory methods for generic BizJet gust load alleviation function

Autoren: C. Poussot-Vassal, P. Vuillemin, O. Cantinaud and F. Sève,
Veröffentlicht in: SIAM Journal on Applied Dynamical Systems, Ausgabe November 2021, 2021, Seite(n) 2391–2411, ISSN 1536-0040
Herausgeber: Society of Industrial and Applied Mathematics
DOI: 10.1137/20m1384014

Design of a morphing leading edge as a high lift device for a regional aircraft

Autoren: C Contell Asins, V Landersheim, J-D Wacker, S Adachi, S Arnold-Keifer, M May
Veröffentlicht in: IOP Conference Series: Materials Science and Engineering, Ausgabe 1024/1, 2021, Seite(n) 012033, ISSN 1757-8981
Herausgeber: IOP Publishing Ltd
DOI: 10.1088/1757-899x/1024/1/012033

Rechte des geistigen Eigentums

Theoretical knowledge on aircraft systems fluids behaviour under leakage conditions

Antrags-/Publikationsnummer: EF 132
Datum: 2020-12-31
Antragsteller: AERTEC SOLUTIONS SL

Mixed reality application integrated to test software

Antrags-/Publikationsnummer: EF 136
Datum: 2020-12-31
Antragsteller: GMVIS SKYSOFT SA

Dongle AIM, miniaturized, handheld, scalable, configurable, wireless communication capable version of an Aircraft Interface Module used for interfacing an aircraft for ground testing

Antrags-/Publikationsnummer: EF 133
Datum: 2020-12-31
Antragsteller: AERTEC SOLUTIONS SL

Advanced Hole-to-Hole assembly process

Antrags-/Publikationsnummer: EF 113
Datum: 2020-12-31

Cockpit mock up for ergonomic testing

Antrags-/Publikationsnummer: EF 135
Datum: 2020-12-31
Antragsteller: ALMADESIGN CONCEITO E DESENVOLVIMENTO DE DESIGN LDA

Improvement of manufacturing processes: Liquid Resin Infusion (LRI) for more eco-friendly production of composite structural parts

Antrags-/Publikationsnummer: EF 131
Datum: 2020-12-31

Advanced Hole-to-Hole assembly process

Antrags-/Publikationsnummer: EF 113
Datum: 2020-12-31

Cockpit mock up for ergonomic testing

Antrags-/Publikationsnummer: EF 135
Datum: 2020-12-31
Antragsteller: ALMADESIGN CONCEITO E DESENVOLVIMENTO DE DESIGN LDA

Improvement of manufacturing processes: Liquid Resin Infusion (LRI) for more eco-friendly production of composite structural parts

Antrags-/Publikationsnummer: EF 131
Datum: 2020-12-31

Cockpit mock up for ergonomic testing

Antrags-/Publikationsnummer: EF 135
Datum: 2020-12-31
Antragsteller: ALMADESIGN CONCEITO E DESENVOLVIMENTO DE DESIGN LDA

Dongle AIM, miniaturized, handheld, scalable, configurable, wireless communication capable version of an Aircraft Interface Module used for interfacing an aircraft for ground testing

Antrags-/Publikationsnummer: EF 133
Datum: 2020-12-31
Antragsteller: AERTEC SOLUTIONS SL

Improvement of manufacturing processes: Liquid Resin Infusion (LRI) for more eco-friendly production of composite structural parts

Antrags-/Publikationsnummer: EF 131
Datum: 2020-12-31

Theoretical knowledge on aircraft systems fluids behaviour under leakage conditions

Antrags-/Publikationsnummer: EF 132
Datum: 2020-12-31
Antragsteller: AERTEC SOLUTIONS SL

Mixed reality application integrated to test software

Antrags-/Publikationsnummer: EF 136
Datum: 2020-12-31
Antragsteller: GMVIS SKYSOFT SA

Advanced Hole-to-Hole assembly process

Antrags-/Publikationsnummer: EF 113
Datum: 2020-12-31

Theoretical knowledge on aircraft systems fluids behaviour under leakage conditions

Antrags-/Publikationsnummer: EF 132
Datum: 2020-12-31
Antragsteller: AERTEC SOLUTIONS SL

Mixed reality application integrated to test software

Antrags-/Publikationsnummer: EF 136
Datum: 2020-12-31
Antragsteller: GMVIS SKYSOFT SA

Armierung von Fensterprofilen

Antrags-/Publikationsnummer: 20 200723
Datum: 2002-01-18

Armierung von Fensterprofilen

Antrags-/Publikationsnummer: 20 200723
Datum: 2002-01-18

Armierung von Fensterprofilen

Antrags-/Publikationsnummer: 20 200723
Datum: 2002-01-18

Suche nach OpenAIRE-Daten ...

Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten

Es liegen keine Ergebnisse vor