European Commission logo
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS

Metamaterial head coil for Ultra High Field MRI

Description du projet

La technologie de l’IRM pour une meilleure imagerie cérébrale

Le projet M-ONE, financé par l’UE, entend présenter une bobine d’IRM innovante et révolutionnaire pour une imagerie cérébrale par IRM à ultra-haut champ magnétique (UHC) de 7 Tesla (7 T), proposant des images homogènes de meilleure qualité. L’UHC permet de mieux décoder les mécanismes cérébraux et de mieux diagnostiquer les maladies cérébrales. Toutefois, certaines inhomogénéités du champ de fréquence radio qui apparaissent à 7 T entraînent des zones sombres sur les images du cerveau, rendant le diagnostic de certaines régions cérébrales peu concluant voire même impossible. Un projet précédent, M-CUBE, a mis au point deux technologies basées sur des métamatériaux pour obtenir des images homogènes du cerveau. Le principal objectif du projet actuel consiste à développer une bobine de métamatériaux de 7 T pour la tête dotée de la meilleure homogéniété et d’un meilleur rapport signal-bruit que les bobines standard de 7 T présentes sur le marché.

Objectif

M-ONE project aims to demonstrate a breakthrough innovative MRI coil for brain imaging at 7 Tesla (7T) enabling a homogeneous and better quality of the image.
Starting from the promising results of the M-CUBE FET-OPEN project n°736937 (MetaMaterial antenna for ultra-high field MRI), the young SME Multiwave Technologies, coordinating the M-ONE project, will with its interdisciplinary consortium (CEA, AMU-Fresnel Institute and UCLouvain) develop a prototype of a MRI head coil that will enable the first artefact-free entire brain images, hence reaching TRL6 at the end of the project.
There is a race to a highly competitive global position in ultra-high field (UHF) MRI. For brain images, the UHF allows a better understanding of brain mechanism and hence a better diagnostic of brain disease. Nevertheless, some issue of radio frequency field inhomogeneities appears at 7T on transmit magnetic field B1+ images. They are translated on brain imaging by three dark areas on brain images, the two temporal lobes and the cerebellum, making diagnosis either impossible or non-conclusive in these regions. During the M-CUBE project, two technologies based on metamaterials have been established to homogenize the brain images. Some partners of the M-CUBE project that constitutes the M-ONE consortium decided to combine these two patented technologies taking the best of each one in order to develop the M-ONE coil. The main objective of the M-ONE is to develop a 7T metamaterial head coil with the best B1+ homogeneity on the market with an equivalent or higher signal-to-noise-ration that the standard 7T head coil. To achieve these coil characteristics, the 7T metamaterial head coil 1Tx/32Rx will be constituted of a metamaterial birdcage coil in transmission (1Tx) combined with a receive array coil (32Rx).
This innovation will place a European SME, Multiwave Technologies, at the pole position of the global MRI Market.

Appel à propositions

H2020-FETPROACT-2019-2020

Voir d’autres projets de cet appel

Sous appel

H2020-EIC-FETPROACT-2019

Coordinateur

MULTIWAVE TECHNOLOGIES AG
Contribution nette de l'UE
€ 220 415,00
Adresse
34 ROUTE DE LA GALAISE
1228 Plan-Les-Ouates
Suisse

Voir sur la carte

PME

L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.

Oui
Région
Schweiz/Suisse/Svizzera Région lémanique Genève
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Liens
Coût total
€ 264 165,00

Participants (5)