European Commission logo
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS

Metamaterial head coil for Ultra High Field MRI

Descripción del proyecto

Tecnología de RMN para una mejor imagenología encefálica

El objetivo del proyecto M-ONE, financiado con fondos europeos, es demostrar una innovadora y revolucionaria bobina de resonancia magnética nuclear (RMN) para imagenología encefálica de RMN de campo ultraalto (UHF) a 7 teslas (7 T), que produce imágenes homogéneas de mejor calidad. El UHF permite descifrar mejor los mecanismos encefálicos y diagnosticar mejor las encefalopatías. Sin embargo, algunas heterogeneidades de campo de radiofrecuencias que aparecen a 7 T dan como resultados zonas oscuras en las imágenes encefálicas, lo que hace que el diagnóstico en regiones encefálicas específicas no sea concluyente o, incluso, que sea imposible. M-CUBE, un proyecto anterior, creó dos tecnologías basadas en metamateriales para obtener imágenes encefálicas homogéneas. El principal objetivo del actual proyecto es desarrollar una bobina de cabeza de 7 T de metamaterial con la mayor homogeneidad y una relación señal-ruido superior a las de las bobinas de cabeza de 7 T del mercado.

Objetivo

M-ONE project aims to demonstrate a breakthrough innovative MRI coil for brain imaging at 7 Tesla (7T) enabling a homogeneous and better quality of the image.
Starting from the promising results of the M-CUBE FET-OPEN project n°736937 (MetaMaterial antenna for ultra-high field MRI), the young SME Multiwave Technologies, coordinating the M-ONE project, will with its interdisciplinary consortium (CEA, AMU-Fresnel Institute and UCLouvain) develop a prototype of a MRI head coil that will enable the first artefact-free entire brain images, hence reaching TRL6 at the end of the project.
There is a race to a highly competitive global position in ultra-high field (UHF) MRI. For brain images, the UHF allows a better understanding of brain mechanism and hence a better diagnostic of brain disease. Nevertheless, some issue of radio frequency field inhomogeneities appears at 7T on transmit magnetic field B1+ images. They are translated on brain imaging by three dark areas on brain images, the two temporal lobes and the cerebellum, making diagnosis either impossible or non-conclusive in these regions. During the M-CUBE project, two technologies based on metamaterials have been established to homogenize the brain images. Some partners of the M-CUBE project that constitutes the M-ONE consortium decided to combine these two patented technologies taking the best of each one in order to develop the M-ONE coil. The main objective of the M-ONE is to develop a 7T metamaterial head coil with the best B1+ homogeneity on the market with an equivalent or higher signal-to-noise-ration that the standard 7T head coil. To achieve these coil characteristics, the 7T metamaterial head coil 1Tx/32Rx will be constituted of a metamaterial birdcage coil in transmission (1Tx) combined with a receive array coil (32Rx).
This innovation will place a European SME, Multiwave Technologies, at the pole position of the global MRI Market.

Convocatoria de propuestas

H2020-FETPROACT-2019-2020

Consulte otros proyectos de esta convocatoria

Convocatoria de subcontratación

H2020-EIC-FETPROACT-2019

Régimen de financiación

RIA - Research and Innovation action

Coordinador

MULTIWAVE TECHNOLOGIES AG
Aportación neta de la UEn
€ 220 415,00
Dirección
34 ROUTE DE LA GALAISE
1228 Plan-Les-Ouates
Suiza

Ver en el mapa

Pyme

Organización definida por ella misma como pequeña y mediana empresa (pyme) en el momento de la firma del acuerdo de subvención.

Región
Schweiz/Suisse/Svizzera Région lémanique Genève
Tipo de actividad
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Enlaces
Coste total
€ 264 165,00

Participantes (5)