Projektbeschreibung
MRT-Technologie für detailliertere Hirnbildgebung
Das EU-finanzierte Projekt M-ONE wird eine bahnbrechende innovative MRT-Spule für die Ultrahochfeld-MRT-Bildgebung (UHF) bei 7-Tesla-Geräten (7T) demonstrieren und so die homogene Qualität der Aufnahmen verbessern. Obwohl mit Ultrahochfeldtechnik sehr genau Gehirnprozesse und Erkrankungen des Gehirns aufgezeigt werden können, kommt es bei 7T-Geräten durch Inhomogenitäten in Hochfrequenzfeldern immer wieder zu dunklen Flecken auf den Hirnscans, was die Diagnose in bestimmten Gehirnregionen erschwert oder sogar verhindert. Im Vorläuferprojekt M-CUBE wurden zwei Technologien etabliert, die mittels Metamaterial die homogene Bildgebung des Gehirns verbesserten. Hauptziel dieses Projekts ist nun, für die Kopfspule eines 7T-Geräts ein Metamaterial zu entwickeln, dessen Homogenität und Signal-Rausch-Verhältnis herkömmlichen 7T-Kopfspulen auf dem Markt überlegen ist.
Ziel
M-ONE project aims to demonstrate a breakthrough innovative MRI coil for brain imaging at 7 Tesla (7T) enabling a homogeneous and better quality of the image.
Starting from the promising results of the M-CUBE FET-OPEN project n°736937 (MetaMaterial antenna for ultra-high field MRI), the young SME Multiwave Technologies, coordinating the M-ONE project, will with its interdisciplinary consortium (CEA, AMU-Fresnel Institute and UCLouvain) develop a prototype of a MRI head coil that will enable the first artefact-free entire brain images, hence reaching TRL6 at the end of the project.
There is a race to a highly competitive global position in ultra-high field (UHF) MRI. For brain images, the UHF allows a better understanding of brain mechanism and hence a better diagnostic of brain disease. Nevertheless, some issue of radio frequency field inhomogeneities appears at 7T on transmit magnetic field B1+ images. They are translated on brain imaging by three dark areas on brain images, the two temporal lobes and the cerebellum, making diagnosis either impossible or non-conclusive in these regions. During the M-CUBE project, two technologies based on metamaterials have been established to homogenize the brain images. Some partners of the M-CUBE project that constitutes the M-ONE consortium decided to combine these two patented technologies taking the best of each one in order to develop the M-ONE coil. The main objective of the M-ONE is to develop a 7T metamaterial head coil with the best B1+ homogeneity on the market with an equivalent or higher signal-to-noise-ration that the standard 7T head coil. To achieve these coil characteristics, the 7T metamaterial head coil 1Tx/32Rx will be constituted of a metamaterial birdcage coil in transmission (1Tx) combined with a receive array coil (32Rx).
This innovation will place a European SME, Multiwave Technologies, at the pole position of the global MRI Market.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht.
- Technik und TechnologieElektrotechnik, Elektronik, InformationstechnikInformationstechnikTelekommunikationFunktechnologieFunkfrequenz
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Schlüsselbegriffe
Programm/Programme
Aufforderung zur Vorschlagseinreichung
Andere Projekte für diesen Aufruf anzeigenUnterauftrag
H2020-EIC-FETPROACT-2019
Finanzierungsplan
RIA - Research and Innovation actionKoordinator
1228 Plan-Les-Ouates
Schweiz
Die Organisation definierte sich zum Zeitpunkt der Unterzeichnung der Finanzhilfevereinbarung selbst als KMU (Kleine und mittlere Unternehmen).