Objectif
TRUST-PV will demonstrate increase in performance and reliability of PV components (e.g. module O&M friendly design, inverter enabled O&M solutions, aftermarket coatings, extended testing beyond standard) and PV systems (e.g. more accurate yield models and assessment, data-driven mitigation measures from monitoring and advanced field inspection, reliability of novel system concepts such as floating PV) in large portfolios of distributed and/or utility scale PV. The TRUST-PV results will be tested and demonstrated from fab to field and all data gathered along the value chain will flow into a decision support system platform with enhanced decision-making using AI.
The innovation at component level in TRUST-PV will be driven by the needs of stakeholders operating in a later stage of a PV project, i.e. Asset managers, EPC and O&M operators. TRUST-PV PV modules will thus become O&M friendly and inverter will enable rapid and cost-effective field inspection.
The innovation at system level will fully exploit the digitalisation of the PV sector by linking 3D design with BIM concepts, developing more accurate models for yield assessments, and closing the gap between performance and failure detection through monitoring and field inspection.
The innovation at the point of connection is based on the deployment of tailored strategies for the residential sector (better observability of performance with cost-effective monitoring solution, use of storage to enable renewable energy communities) and the utility sector (e.g. combination of advanced forecasting with storage and regulation through power plant controllers) with the final aim of improving the hosting capacity and increase stability.
Finally, in TRUST-PV we envision a path of circular economy which enhances disposed components/material recovery for further use in the industry, to support progressive steps of plant repowering, aimed at increasing their production and lifetime without requiring additional land.
Champ scientifique
- engineering and technologymaterials engineeringcoating and films
- social sciencespolitical sciencespolitical policiescivil society
- social scienceseconomics and businesseconomicssustainable economy
- engineering and technologyenvironmental engineeringenergy and fuelsrenewable energysolar energyphotovoltaic
Mots‑clés
Programme(s)
Régime de financement
IA - Innovation actionCoordinateur
39100 Bolzano
Italie
Voir sur la carte
Participants (22)
3001 Leuven
Voir sur la carte
1678 Nicosia
Voir sur la carte
20122 Milano
Voir sur la carte
Participation terminée
51105 Koln
Voir sur la carte
15125 Maroussi
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
1000 Bruxelles / Brussel
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
01126 VILNIUS
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
97490 Sainte Clotilde
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
Participation terminée
6167 RD Gellen
Voir sur la carte
1040 Bruxelles / Brussel
Voir sur la carte
00139 Roma
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
38121 Trento
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
00198 Roma
Voir sur la carte
SE1 0NW London
Voir sur la carte
40549 Dusseldorf
Voir sur la carte
CO4 3ZL Colchester
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
2628 CN Delft
Voir sur la carte
44321 Nantes
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
2595 AN Den Hag
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
51105 Koln
Voir sur la carte
6167 RD Geleen
Voir sur la carte
6167 RD Geleen
Voir sur la carte