Obiettivo
The aim of the project is to improve the quality of existing CFD codes, as well as their range of applicability. Furthermore, and especially to lower costs in design processes, the existing variety of numerical tools needs to be validated against accurate and detailed measurements, in order to enhance performance, robustness and user-friendliness of the codes.
Partly due to the rapid increase in computer power, speed and performance, computational fluid dynamics (CFD) plays an increasingly important role in the predesign as well as design stages of aircraft development by lowering costs and providing information on critical flow processes.
This project was an initial contribution towards validating advanced modelling methods for a broad range of aerodynamic flows directly relevant to civil aviation. Particular emphasis was put on the performance of turbulence models for maximum lift and high lift, single element aerofoils and multielement aerofoils and on shock boundary layer interaction in transonic conditions over aerofoils and bumps in channels as well as over wings. Other areas focussed on boundary layer schemes, tunnel interference effects, vortical flows including vortex breakdown and problems which arise when extrapolating wind tunnel data to free flight conditions.
It has provided new insight into CFD capabilities and has delivered important guidelines on which computational approaches are promising in several application areas.
Multiple investigations have been performed on the main influences that may affect Navier-Stokes solutions such as turbulence modelling, grid effects and wind tunnel correction parameters. It has been shown that the quality of the results obtained indeed may strongly depend on these influences. There was some significant scatter in the results presented. Concerning the mesh influences and the performance of turbulence models, some basic tendencies became visible.
The mandatory grid that has been used in most of the tests seemed to affect the solutions to a certain degree in general. The main disadvantage of this grid may be seen in the absence of adequately condensed streamwise step sizes within the shock region, preventing by this a more satisfactory resolution of the lambda structure at the shock foot. Hence, better agreement was achieved between computations and the experiments just by using different grids of higher density.
The turbulence models employed had the most significant impact on the solutions. There were drawbacks in all models and their performances sometimes turned out to be different in different flow situations. Modifications of the most common Baldwin-Lomax model, such as the Granville extension or the Goldberg backflow model, have been shown to perform to a significantly improved level of accuracy in the separated flow regime. The 'half equation' nonequilibrium models of the Johnson-King class turned out to be very promising, although the well known deficiencies that cause an unsatisfactory skin friction representation still prevent a 'break through' of this model type. The Johnson-Coakley variant, originally designed to overcome this drawback, had been tested also, but, for the test cases investigated here, this model did not succeed.
Due to the non-condensed mandatory grid that most of the computations have been performed within, the more complex turbulence models such as transport and stress models did not succeed to a superior degree over the algebraic models, which was caused by the impossibility to resolve for the shock lambda structure.
The results computed depended on the way the wind tunnel corrections were introduced. This, however, is not really a numerical effect acting on the solutions, and so there is little that can be done as long as the applications aim for free flight conditions rather than to account for the wind tunnel environment (which, however, is possible but is connected with considerable increase of computational effort).
To achieve a better understanding of turbulence models with respect to their influence on flow prediction, commonly used algebraic, 1-equation and 2-equation turbulence models as well as Reynolds stress models will be investigated.
For the design process (for single as well as for multi-element aerofoils) it is of prime industrial importance to compute maximum lift situations and to validate them properly. In addition to these investigations and for the purpose of method evaluation, calculations with both free air and tunnel boundary conditions will be compared to achieve corrections to free flight conditions.
With respect to the already available industrial experience in 3-dimensional calculations for wings and complete aircraft and the need to improve the corresponding codes, work will also be performed on the 3-dimensional validation-against-measurement process, in particular for flows about wings. One special objective is to investigate vortical flows with respect to the prediction of vortex breakdown.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria meccanica ingegneria dei veicoli ingegneria aerospaziale aeromobili
- scienze naturali scienze fisiche meccanica classica meccanica dei fluidi dinamica dei fluidi dinamica dei fluidi computazionale
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Dati non disponibili
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
88039 Friedrichshafen
Germania
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.