Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS
Contenuto archiviato il 2022-12-27

MANUFACTURING OF THERMAL INSULATING PANELS WITH RECYCLED RAW MATERIALS

Obiettivo

To produce new thermal and acoustic insulating panels from low cost recycled raw materials principally cellulose (waste papers, ...) straw,... without any binder. Annual energy saving is about 1.150 TOE and payback time is 1,8 year.
The project may be considered as a technical and economic success.
However, several adaptations were necessary during the initial operational phase:
- add a hammer-mill after the straw-cutter to get pieces of straw small enough
- improvements in the dryer furnace performance which had not been designed according to the specifications
- addition of a heat exchanger on the exhaust air of the dryer to improve the global thermal yield and recover heat for space heating
- design of a system to collect and recycle the dust produced during the process.
Due to a performance of the dryer being lower than expected, the annual production of panels will be consequently lower than foreseen, with a corresponding decrease in the annual energy savings. However, the economic viability remains satisfactory.
A manufacturing licence for the manufacture of these products is available, under certain conditions, from the contractor.
The process for the panels can be divided into eight separate phases.
- Preparation of raw materials : waste papers, straw (or other
vegetables wastes), water, fireproofing products
- Preparation of the paste in a pulper
- Homogenization of the paste by mechanical mixing
- Forming the panels
- Drying in a tunnel kiln
- Gauging and sanding down the panels
- Pasting and covering the two faces with cardboard and pressing
- Machining before utilization
Total capacity of the plant is 750 panels/day that is to say 540.000 m2/year.
Innovative aspect is relative to the production of insulating panels with low cost raw materials without any significant consumption of energy.

Campo scientifico (EuroSciVoc)

CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.

Questo progetto non è ancora stato classificato con EuroSciVoc.
Suggerisci i campi scientifici che ritieni più rilevanti e aiutaci a migliorare il nostro servizio di classificazione.

È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione

Programma(i)

Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.

Argomento(i)

Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.

Invito a presentare proposte

Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.

Dati non disponibili

Meccanismo di finanziamento

Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.

DEM - Demonstration contracts

Coordinatore

PAN TERRE SA
Contributo UE
Nessun dato
Indirizzo
PARC INDUSTRIEL DES HAUTS SARTS 4E AVENUE 40
4400 HERSTAL
Belgio

Mostra sulla mappa

Costo totale

I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.

Nessun dato
Il mio fascicolo 0 0