Ziel
At the outset of the project, SiC-reinforced aluminium alloys were evaluated but found to suffer from the extreme hardness of the SiC which made them impossible to machine with conventional tooling and this constituent rendered them unplatable. Instead, novel light-weight high silicon aluminium-silicon (Al-Si) alloys specifically tailored for electronics packaging applications have been produced using a spray forming technique. The alloys can be produced with tailored CTE by adjusting the ration of aluminium to silicon. Attention has been focused on alloys between 55wt% Si (CTE 11ppm/C) to 70wt% Si (CTE 6.5 ppm/C).
The novel materials have been assessed for ease of machining and processing cost using a number of alternative techniques and the results to date indicate that the omission of SiC (a necessary constituent of conventional MMC) from the alloy greatly facilitates machining, allowing milling to be carried out using carbide tooling, without the need for expensive diamond-faced tools. Machined finishes have routinely achieved surface roughness of approximately 1µm or less. The ability to bolt down packages of these materials has been demonstrated.
Plating procedures for applying silver and gold finishes to packages of the Al-Si alloys have been successfully developed so that the metallisations can sustain temperature cycling appropriate to joining and other processing steps without blistering. Having evaluated a range of processes for joining high silicon Al-Si alloys to themselves and to other materials used in electronics packages, techniques have been developed for bonding Kovar sidewalls to bases of Al-Si, lid-sealing and Al-Si packages and hermetically soldering-in feedthroughs. Comparative trials involving different solders have led to the selection of lead- and gold-based solders for bonding the feedthroughs. Lid-sealing trials using laser and resistance welding have produced encouraging results, although not sufficiently satisfactory for immediate application. Diffusion soldering has been identified as the preferred method of bonding kovar side-walls to bases of the high silicon Al-Si alloys.
Prototype MIC packages both of 'homogeneous' (i e all Al-Si alloy package) and 'heterogenous' construction (Al-Si base and kovar side walls) have been fabricated using the Al-55/70Si alloys machined by EDM (electro-discharge machining) and electroplated with silver and gold. Prototype packages, utilising conventional kovar side walls containing feed-throughs, and Al-Si alloy bases ('heterogeneous' packages) have also been fabricated. For 'homogeneous' MIC packages, the Al-Si alloys were shaped by EDM and electroplated with a gold finish. Other types of components have also been produced using a combination of machining processes, namely carriers for gallium arsenide power MMICs and iris components used in microwave filters.
Aluminium based Metal Matrix Composites (MMCs) offer a combination of materials properties unattainable alloys. These include high thermal conductivity,high modulus of elasticity,low density and low thermal coefficient of expansion. This combination of properties is ideal for electronic packaging where it offers major benefits,namely,lower weight,better thermal performance and higher reliability of electronics systems. Commercially available,structural grades,of MMCare not optimised for this purpose and they are difficult to fabricate into the complex,high tolerance,shapes required. This project will therefore concentrate on developing new MMC materials specifically optimised for electronic packaging and on devising new,innovative,methods for shaping,coating and joining MMC in a cost effective manner.
Because of the weight saving offered it is believed that the earliest applications will be in the aerospace and avionics industries. Since the inherent,materials,cost of MMCs are low, the development of new materials and fabrication technologies in this project should facilitate the use of MMCs in fields as diverse as machine tools,airframe construction and the automotive industry.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Technik und Technologie Werkstofftechnik Verbundwerkstoffe
- Technik und Technologie Maschinenbau Produktionstechnik subtraktives Fertigungsverfahren
- Technik und Technologie Maschinenbau Fahrzeugbau Automobiltechnik
- Naturwissenschaften Chemiewissenschaften anorganische Chemie Nachübergangsmetalle
- Technik und Technologie Werkstofftechnik Beschichtung
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Wir bitten um Entschuldigung ... während der Ausführung ist ein unerwarteter Fehler aufgetreten.
Sie müssen sich authentifizieren. Ihre Sitzung ist möglicherweise abgelaufen.
Vielen Dank für Ihr Feedback. Sie erhalten in Kürze eine E-Mail zur Übermittlungsbestätigung. Wenn Sie sich für eine Benachrichtigung über den Berichtsstatus entschieden haben, werden Sie auch im Falle einer Änderung des Berichtsstatus benachrichtigt.
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
WD6 1RX Borehamwood
Vereinigtes Königreich
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.