Obiettivo
The main conclusions which can be drawn from the project are the following:
- New gasket sheet materials were developed and tests were performed in laboratory conditions. Most of these new materials are distinctly improved in view of e.g. tightening capability, creep strength and load bearing capacity compared to reference materials available on the market at the beginning of the project.
- Gasket factors were defined which realistically describe the behaviour of gasket materials and which allow a realistic assessment of the gasket's performance. A gasket factor data bank is prepared.
- Optimized gasket testing techniques were developed and fixed which guarantee a realistic assessment and evaluation of gasket's performance in view of tightening capability, load bearing, creep resistance and long term behaviour under the influence of time, temperature and medium and therefore a targeted development of new gasket materials; the description of these testing procedures will be the basis for a CEN standard on gasket testing.
These testing techniques were evaluated by comparison of the results received with those of real flanged joint tests. Fairly good agreement was shown between gasket testing and flanged joint tests, so that the testing procedures can be looked as verified.
Figures of gasket factors - related to leak rate or tightness - are determined which allow combined with the new European calculation code pr EN 1591 a strength and tightness analysis of flanged joints. These results can be the basis for gasket factor classification in the CEN calculation code per EN 1591.
Bearing in mind rising standards of immission control and restrictions on the use of gasket materials containing asbestos, the proposed project plans to create the basis for a systematic and optimized development of new gasket materials and to provide realistic evidence of the strength and tightness of flanged joints. The main tasks of the project are:
- to define and set the relevant gasket factors,
- to work out, verify and set the test procedures for the determination of the above mentioned gasket factors,
- to determine the gasket factors for asbestos free materials including the sealing and relaxation properties under realistic operation conditions (medium, temperature, time, pressure, changing loads),
- to draft out European standards for defining gasket factors under testing procedures as well as specifications for gasket materials,
- to create a data basis for a data bank.
Apart from improved technological co-operation in Europe, there will be a positive effect on the competitiveness in many areas of industry and improvements in environmental protection and working conditions.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
70569 Stuttgart
Germania
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.