Obiettivo
Co-Pt(P) natural multilayers of very high coercivity, both for thin films (>5kOe) and for thick coatings (2kOe), were obtained. These are the electrodeposited films of the highest coercivity ever obtained, and their application for magnetic layers of computer hard disks or for permanent micro-magnets was investigated, by realising sample disks and thick electrodeposited layers. Similar layers with high Pt content were investigated as layers to improve the hot corrosion resistance.
Co/Cu multilayers, with sublayer of nanometer thickness, were realised with the single and double bath technique, obtaining layers showing the giant magnetoresistive effect. The Co/Cu layers obtained with the single plating bath showed superior stability at high temperature (up to 350°C), minor coercivity and strong magnetoresistance sensitivity; they showed interesting possibilities for magnetic sensors and magnetic recording heads.
Ag/Cu multilayers of high resistivity change with temperature were obtained with the single plating bath technique, with possible application as thermal sensors. Au/Co multilayers were electrodeposited from a single bath, decreasing the internal stresses with additions improving the layering definition. Decreasing the sublayer thickness friction coefficient decreases and wear resistance increases.
Ni-P/Sn multilayers with very high wear and corrosion resistance, combining the high hardness of the Ni-P sublayer with the good lubricating properties of the Sn sublayer, were electrodeposited with the double bath technique. The maximum corrosion resistance is obtained when the Sn sublayer thickness is very small and passivation results from compounds obtained from the oxidized P and Sn.
The research will investigate the ElectroChemical Deposition (ECD) of compositionally modulated multilayers (CMM) of transition metals, containing precious metals. CMM of high coherency and layer thickness uniformity can be obtained by ECD; perfection depends on bath composition and deposition conditions.
Major research tasks are : (i) design and study of prototype equipments for ECD-CMM electrodeposition in a single bath, containing all the metals to be deposited, and in dual baths, with deposition of sublayers in the separate baths; (ii) electrodeposition and determination of the optimum conditions to obtain microlayered alloys, with precious metals as nanolayers; (iii) development of models for layers interaction and CMM electrocrystallization, in order to understand ECD-CMM structure, layer growth and to increase the layer perfection; (iv) determination of ECD-CMM structural, magnetic, optical, thermal, transport and mechanical properties, and of their wear and corrosion resistance; (v) evaluation of ECD-CMM potentiality for industrial application in the field of : magnetic recording, electronic devices, electric contacts, hot corrosion and erosion resistant coatings.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia nanotecnologia nanomateriali nanostrutture bidimensionali
- ingegneria e tecnologia ingegneria dei materiali rivestimenti e pellicole
- ingegneria e tecnologia ingegneria elettrica, ingegneria elettronica, ingegneria informatica ingegneria elettronica sensori
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
20133 MILANO
Italia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.