CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.
I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .
Risultati sfruttabili
The DISMEW project has developed a life assessment routine for dissimilar welds in steam piping, which functions as a post-processor program for the output of a component finite element analysis. The development is based on a targeted program of experimental and analysis work. Two material dissimilar weld combinations were considered: (2.25)chromium(1)molybdenum to modified (9)chromium(1)molybdenum and modified (9)chromium(1)molybdenum to Esshete 1250. Results from high temperature creep and low cycle fatigue tests on crossweld specimens machined from the welds have been used to rank the weld procedures and calibrate linear damage summation and continuum damage mechanics lifting models.
The life assessment procedures have been implemented as the POST-D post processor. The damage location and life estimates for the P22-P91 component agreed with the benchmark component test results. In the case of the P91-Esshete component, the location of maximum damage was correctly predicted. On the other hand, analysis of the finite element output for models including thermal mismatch produced severe overestimations of the creep damage.
A new methodology has been developed involving the use of creep and fatigue cross-weld test data for the welded joint's life assessment. The methodology does not involve finite element (FE) simulations of local microstructure of the weld and it is not based on inaccurate generic weld reduction factors. Optimum welds are produced for advanced steels.
È in corso la ricerca di dati su OpenAIRE...
Si è verificato un errore durante la ricerca dei dati su OpenAIRE
Nessun risultato disponibile