Ziel
The major objectives which represent significant advances on current practices are, the development of (a) high temperature (300A$ĆAC) resistant material forms which are tailored for the process; (b) high temperature (300A$ĆAC) resistant films capable of an increase in area of 100%; (c) an overall process cycle of 20 min; (d) tools with heating and cooling rates of 20A$ĆAC/min together with a coefficient of thermal expansion of 5x10-6/K.
Preliminary work on polymeric diaphragm forming of continuous fibre reinforced thermoplastics has proved that this process has great potential for the fabrication of complex curvature components from this new generation of high performance composite materials. The equipment which has been used in the recent work has included hot autoclaves, cold autoclaves, pressclaves and modified vacuum forming machines but there is no clear indication as to which is the most suitable for any particular product. As this technique is very new it requires substantial development to bring it to the stage where it will become both technically and commercially viable. The major objectives which represent significant advances on current practices are, the development of high temperature (300 C) resistant material forms which are tailored for the process, high temperature (300 C) resistant films capable of an increase in area of 100%, an overall process cycle of 20 minutes and tools with heating and cooling rates of 20 C per minute together with a coefficient of thermal expansion of 5E-6 K{-1}.
The selection and design of the aircraft component was completed. The design and the construction of a consolidation measurement apparatus were completed. The design of the rig for the measurement of the shear deformation behaviour was completed. The software for the thermal analysis was selected and used to carry out preliminary modelling. The tools for the different forming routes were designed and manufactured. Preliminary forming trials have been carried out. The material development is under ongoing improvement. A 1-dimensional transient conduction model and a 2-dimensional radiation model has been developed to optimize the heating process.
Thermoplastic composites offer some advantages against thermoset. They need only short production times as they require no curing reaction. The polymeric diaphragm technique is one production technique where the thermoplastic composite is fixed between 2 diaphragms under vacuum, heated to processing temperature and shaped over a mould by air pressure. This technique is especially suitable for complex parts with high draping rates.
The processing development includes: double and single diaphragm techniques in the cold autoclave with additional heating elements; development of a new machine to optimize the production time and to study the process possibilities under automation aspects for fast production cycles; single diaphragm technique for bonding of flat plates together with stiffening elements (L-stiffeners, etc). A waterjet cutting system has been installed for trimming the produced parts. The complete production line is based on an automation concept to show that composites can be produced in an automatic way comparable to metallic materials.
In parallel to the development of the diaphragm machine, a tooling concept has been developed. In order to form high quality parts in short cycle times, the tool has to be heated as fast as possible to the processing temperature at the surface where it comes in contact with the material to be formed. Internal heating of the mould with thermo oil or electrical cartridges has been found too slow and too expensive. It was decided to develop and build thin tools, externally heated on both sides with infrared heaters. A tooling material had to be selected with low thermal mass for high heating rates. On flat plates and small experimental tools the heating and cooling rate was determined experimentally. The first forming experiments with this tooling concept were performed in the autoclave, leading to low heating and cooling rates. The spoiler was formed perfectly even with variation in thickness and doublers in the area where the ribs will be riveted. A 1-dimensional transient conduction madel and a 2-dimensional radiation model has been developed to optimize the heating process.
Preliminary work on polymeric diaphragm forming of continuous fibre reinforced thermoplastics has proved that this process has great potential for the fabrication of complex curvature components from this new generation of high performance composite materials. The equipment which has been used in the recent work has included hot autoclaves, cold autoclaves, pressclaves and modified vacuum forming machines but to date there is no clear indication as to which is the most suitable for any particular product. As this technique is very new it requires substantial development to bring it to the stage where it will become both technically and commercially viable.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Technik und Technologie Werkstofftechnik amorphe Feststoffe amorphe Halbleiter
- Technik und Technologie Werkstofftechnik Verbundwerkstoffe
- Technik und Technologie Maschinenbau Fahrzeugbau Luft- und Raumfahrttechnik Flugzeug
- Sozialwissenschaften Soziologie industrielle Beziehungen Automatisierung
- Naturwissenschaften Chemiewissenschaften analytische Chemie Kalorimetrie
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Daten nicht verfügbar
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Daten nicht verfügbar
Koordinator
88039 Friedrichshafen
Deutschland
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.