Objetivo
The aim is to improve surfaces of electrical contacts, in order to achieve better reliability against corrosion, aging, wear and vibration, and to decrease production cost through noble metal saving or improvements of plating. This will be done by better control of undesired film formation, selection of surface additives (such as lubricants thin film deposition procedures set up).
The research investigated methods for improving the surfaces of electrical contacts, in order to achieve better reliability against corrosion, ageing, wear and vibration, and to decrease production cost through noble metal saving or improvements of plating. The control of undesired film formation, the selection of surface additives (such as lubricants) and thin film deposition procedures were studied in particular.
Research has been carried out in order to improve electrical contact surfaces involved in data processing, telecommunication, automotive and consumer applications. Research focused on replacing gold by an organic film, either liquid or solid film and screening different types of existing metallic plating together with new or existing lubricants in order to optimize the coupling between both.
With respect to the organic film, 2 ways were investigated to protect the nickel used to cover the substrate. The first was to realize a thin film of liquid perfluorinated polyether (PFPE) on the metal. The second way was to electropolymerize polyacrylonitrile (PAN) on the metal, the polymer layer being heat treated in a second phase to ensure conductivity.
The PAN coating was chosen to realize a connector. However results on connector has been disappointing: contact resistance reached acceptable value only after a few sliding cycles and the friction coefficient was often too high.
A wide range of contact metallurgies used in automotive applications was surveyed and a representative test matrix selected. These included various tin, gold and silver alloys as well as less traditional finishes such as nickel and clad inlay materials.
The types of protective greases available were also surveyed and an initial screening process conducted.
The test procedures were derived from a survey of accelerated environmental tests for automotive electronics and connectors and in addition to these tests a large number samples of the test plates were exposed to various real automotive environments for up to 2 years.
The results of the test gave the following conclusions. Care should be taken to avoid contact degradation due to copper diffusion through tin and silver at elevated temperatures. Gold and silver surfaces are unlikely to suffer from fretting corrosion in automotive environments. Also, contacts with thin layer of gold are less corrosion resistant than tinned finishes in under bonnet environments. Finally, it was shown that lubricants do improve contact reliability but only if the product is properly formulated and specific to the application
Influence of film thickness, in the range of 1 to 100 mm, will be studied for various layers such as lubricants, oxidation or conversion products, grafted polymers. An original procedure based upon electropolymerisation, presently at the research stage, will be developed. Degradation mechanisms in an aggressive automotive environment will be studied on a quantitative basis; test methods will be developed; effect of applied voltage and current will be taken into account.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ingeniería y tecnología ingeniería mecánica tribología lubricación
- ciencias naturales ciencias químicas química inorgánica metales de transición
- ciencias naturales ciencias químicas química inorgánica metales de postransición
- ingeniería y tecnología ingeniería de materiales recubrimiento y películas
- ingeniería y tecnología ingeniería de materiales metalurgia
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Datos no disponibles
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Datos no disponibles
Coordinador
78035 Versailles
Francia
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.