Ziel
In spite of the growing commercial maturity of a wide range of surface engineering technologies, there are no comprehensive design systems for surface engineering. Accordingly, the overall objective of the present research proposal is, in the anticipation of an increased industrial awareness and application of surface engineering, to develop a design system for surface engineering through mathematical modelling and computer simulation of various plasma enhanced surface engineering processes as well as t properties of the resultant surface engineered components.
2
An extensive and comprehensive data base has been built up on the plasma nitriding process and on the relevant properties of plasma nitrided steels. This includes both available published literature and additional experimental data. This data base has been used in the mathematical models developed in the present work to simulate the plasma nitriding process and the resultant service behaviour of low alloy steels.
Various experimental techniques have been used to measure the thermodynamic data of the nitriding process and mechanical properties of nitrided steels, including the diffusion coefficient of nitrogen, reaction rate of the nitriding process, elastic moduli of gamma'-Fe4N layers and TiN coatings, hardness profiles, friction and wear behaviour and residual stress profiles. The elastic modulus of nitrided gamma'-Fe4N layer has been measured for the first time, using the nano-indentation, electrodynamic balance and sound velocity methods. These methods produced similar results, i.e E = 130-140 GPa for gamma'-Fe4N layers.
The X-ray diffraction technique has been used to measure the residual stress profiles developed in various nitrided specimens. Detailed profiling investigations have revealed that the maximum compressive residual stress level is developed in bright nitrided specimens, in particular, those produced at low temperatures. With increasing temperature and time, the compressive stress level is reduced to such an extent that a tensile stress may develop some distance below the surface. This phenomenon, discovered for the first time for plasma nitriding, indicates the detrimental effect of high temperature and long time nitriding on residual stress distribution and the resultant fatigue properties of nitrided components. A mathematical model has been developed to simulate the development of residual stresses in nitrided low alloy steels.
Mathematical models have been developed to simulate the plasma nitriding process of low alloy steels, using both finite difference and finite element methods. A software package PLASMA, has been developed based on the models, which can run on any IBM PC. PLASMA has various functions, including self-supporting windows, graphic facilities, and the ability to simulate one-stage and two-stage processes, as well as to predict required nitriding times.
A mathematical model has been developed using the numerical integral transform technique, to simulate the elastic contact problems of layered surfaces, including nitrided single layer and duplex treated double layer surfaces. The model is the most advanced available so far, considers (1) different properties in various layers; (2) real rough surfaces; (3) friction effects and (4) residual stresses. The model has been successfully applied to predict the load bearing capacity of various materials under rolling-sliding testing and gear testing of nitrided and duplex treated steels.
A design system has therefore been developed in the present work for plasma nitriding of low alloy steels. The package comprises three models, i.e. the nitriding model, the residual stress model and the contact model, and various input data established by experiments.
The detailed scientific tasks of the programme are :
- to produce a design database for the Processing and Properties of Plasma Nitrided Low Alloy Steels
- to produce a Finite Element Model software package capable of predicting the plasma nitriding processing performance of low alloy steels
- to produce a Finite Element Model software package capable of predicting the load bearing properties of plasma nitrided and duplex treated low alloy steels.
This will mean that not only will design engineers be able to use the models in engineering design, but also materials processing engineers can use the models in the selection of optimum process parameters.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Naturwissenschaften Informatik und Informationswissenschaften Software
- Naturwissenschaften Informatik und Informationswissenschaften Datenbank
- Naturwissenschaften Chemiewissenschaften anorganische Chemie Nachübergangsmetalle
- Technik und Technologie Werkstofftechnik Beschichtung
- Naturwissenschaften Mathematik angewandte Mathematik mathematisches Modell
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Wir bitten um Entschuldigung ... während der Ausführung ist ein unerwarteter Fehler aufgetreten.
Sie müssen sich authentifizieren. Ihre Sitzung ist möglicherweise abgelaufen.
Vielen Dank für Ihr Feedback. Sie erhalten in Kürze eine E-Mail zur Übermittlungsbestätigung. Wenn Sie sich für eine Benachrichtigung über den Berichtsstatus entschieden haben, werden Sie auch im Falle einer Änderung des Berichtsstatus benachrichtigt.
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Daten nicht verfügbar
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Daten nicht verfügbar
Koordinator
B15 2TT BIRMINGHAM
Vereinigtes Königreich
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.