Ziel
This proposal seeks to apply the "Graded Structures" concept to engineering components, required to perform in environments which no single material is capable of satisfying.
The three cornerstones of the work involved the development of technologies for the fabrication of 2 and 3-Dimensional bodies in graded form, the assessment of microstructure and testing of laboratory specimens and prototype tools, and the interaction with industry to advise and exploit the findings.
The work mainly involved the WC/Co system used in the fabrication of mining tools and tooling for beverage cans.
The fabrication technologies exploited in this programme for the construction of 2 and 3-Dimensional structures have been Powder Injection Moulding (PIM), warm rolling, pressureless sintering and HIP'ing. The first two have been developed to produce flat sandwich structures and complex 3-Dimensional shells in a range of WC/Co compositions. Pressureless sintering in the solid and liquid state have been utilised with and without post HIP'ing and the conditions necessary for full densification have been established.
Finite Element techniques were applied to determine residual stresses at 2 and 3-Dimensional interfaces and they have illustrated the effects of compositional changes and geometries on internal stresses developed upon cooling from the fabrication temperature.
Prototype mining tools fabricated by sintering and HIP'ing and incorporating flat and conical interfaces have been successfully produced and tested under simulated conditions. Although direct comparisons between tools incorporating graded structures and those commercially available cannot at this stage be made with any degree of certainty, these initial tests have demonstrated the importance of developing the geometry of such tools to reduce the cost of rock machining and the potential for the construction of smaller machines for tunnelling. This was shown to be possible with the introduction of graded structures and more work is required to determine the cost savings and environmental effects of the new tools.
Collaboration throughout the project with the industrial endorsers has demonstrated the importance of making full use of current technologies and fully appreciating the specific needs from tools. It also demonstrates that any further work on these tools should take into account the total engineering needs of the suppliers, users and machine manufacturers since it is apparent that the benefit of such development could only be meaningful if seen from the perspective of industry across the supply chain.
Specifically, it involves the engineering of composite multi-layer structures to enable the utilization of the wear and/or heat resistance of ceramics and cermets and the toughness of metallic alloys. Combination of carbide carmets with tool steels and oxides or borides with nickel base alloys will initially be investigated. Along with the applied technological aspects of the research a fundamental approach will be adopted to facilitate the engineering of interfaces in order to overcome joining problems associated with the physical and chemical incompatibilities between dissimilar materials. Powder metallurgical techniques will be applied to fabricate "graded" components, including hot isostatic pressing, uniaxial hot pressing, injection moulding and tape casting. The structures produced will be assessed metallographically and the microstructure and physical properties obtained will be correlated against the fabrication techniques employed.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Technik und Technologie Sonstige Technik und Technologie Lebensmitteltechnologie
- Naturwissenschaften Chemiewissenschaften anorganische Chemie anorganische Verbindungen
- Technik und Technologie Maschinenbau Produktionstechnik subtraktives Fertigungsverfahren
- Naturwissenschaften Mathematik reine Mathematik Geometrie
- Technik und Technologie Werkstofftechnik Keramik
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Daten nicht verfügbar
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Daten nicht verfügbar
Koordinator
OX12 9BJ Wantage
Vereinigtes Königreich
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.