Obiettivo
The basic aim of the project is the laboratory scale development of high quality iron-based soft magnetic alloys, for prospective use in medium and high-frequency devices (400 Hz - 1 Mhz).
Preparation, characterization and study of nonconventional low loss soft magnetic alloys, to be prospectively employed in efficient electrical devices operating at medium and high frequencies, have been undertaken. A 3-fold approach to the problem has been pursued, with respect to the following materials: amorphous iron based and cobalt based alloys, iron silicide 6.5 wt% rapidly solidified alloys, iron silicide 6.5 w% laminations, silicon enriched by means of chemical vapour deposition. The obtained materials, whose magnetic performances have been optimised after preparation by means of suitable thermal/thermomagnetic treatments, have been exhaustively characterized from a structural, mechanical and magnetic point of view. The relationships existing between the intrinsic and structural properties on the one hand and the magnetic and mechanical properties on the other hand have been identified. The final materials, tested under a wide range of exciting frequencies, exhibit excellent soft magnetic behaviour, which favourably compares with that of top quality conventional commercial alloys.
Areas of possible exploitation include: distribution transformers; variable speed motors; magnetic cores; sensors and transducers; shielding; pulsed power applications.
Basically, such alloys will be required to have high saturation induction, high permeability, low losses, medium to low magnetostriction and good mechanical properties, in order to compare favourably with current materials. Applications might include medium and high-frequency transformers, actuators, inverter transformers, switched-mode power supplies, saturable reactor cores, magnetic switches.
The following key objectives are envisaged :
(i) elaboration by planar flow casting of thin (<= 20 degreesm) FeB-based amorphous ribbons, having low losses at high frequencies (10 Khz - 1 Mhz)
(ii) elaboration by planar flow casting of crystalline high Si ribbons (4.5 wt%
(iii) elaboration by CVD of Si (or Al enriched conventional grain-oriented FeSi laminations, with properties optimized at medium and, if possible, power frequencies
(iv) assessment of the microstructural properties of the elaborated alloys
(v) comprehensive magnetic characterization
(vi) theoretical assessment of magnetic vs. microstructural properties.
On the project is intended to enhance European know-how in the field of innovative soft magnetic materials.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
- scienze naturaliscienze chimichechimica inorganicametalli di transizione
- ingegneria e tecnologiaingegneria elettrica, ingegneria elettronica, ingegneria informaticaingegneria elettronicasensori
- scienze naturaliscienze chimichechimica inorganicametalloidi
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Argomento(i)
Dati non disponibiliInvito a presentare proposte
Dati non disponibiliMeccanismo di finanziamento
Dati non disponibiliCoordinatore
10125 Torino
Italia