Ziel
In the project a novel multisensorial-data supported industrial inspection system for metal parts is proposed. It involves new X-ray sensors and conventional light based computer vision modules, for simultaneous detection and correlation of internal and surface quality defects of metal parts, giving non invasively in realtime, a total quality assessment.
Initial research involved the development of 2 high voltage generators to be integrated into the imaging system intended for high thickness material radioscopy. The 225 kV, 13 mA and 420/450 kV, 15 mA generators have been run up to 250 kV, on the dummy load at 0 mA without any high voltage failure.
A new solid state linear detector was developed to detect high energy X-ray photons. Tests demonstrated that the efficiency of the detector was 30 to 300 times higher than that of the screen/low light level camera device.
A process was elaborated upon to identify automatically the defects detected on metal products. The basis for the recognition is the radioscopic image for internal defects and the optical image under structured light for external defects.
Research was then carried out with respect to X-ray image parameter definition.
The structure of the X-ray inspection system for metal products consisted of 4 major components: image acquisition, preprocessing, detection and defect classification. These steps followed the learning phase where the characteristics of a flawless part of the image were determined. The output of this module is a report file containing information on the type and location of each detected defect.
With the purpose of developing an analysis system for visual inspection of aluminium ingot dedicated to external fault detection a structured light system was used. Employing an image self correlation in time technique, a system able to perform a complete real time inspection of aluminium ingot and detect 4 types of fault was built and tested.
Among the manufacturing process plants operated by the ALUMIX Group, which ALURES belongs to, the rod continuous production line was selected as an industrial real case for testing the prototype. The system demonstrated its ability to detect surface irregularities online with a sensitivity complying with the requirement of the aluminium rod production line. Approaches were developed to integrate analysis of the internal and external faults.
The system will be suitable for unattended, as well as for manned operations, in dense factory environments. It will be based on advanced image processing algorithms and multi-sensorial data fusion methodologies, effectively combining images features and high level artifacts derived from them, in order to compile an accurate defect modelling and localization and to fast validate the produced parts, according to their overall quality specifications.
The project aims at a directly exploitable multi-sensorial inspection workstation, to be actively marketed by the consortium members soon after the projects conclusion, both in EEC countries and abroad.
The system will bring high-tech quality inspection tools to a hostile and difficult to operate environment (such as metal parts manufacturing, casting and machining), thus offering a tremendous potential for quality improvement and productivity acceleration.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Technik und Technologie Elektrotechnik, Elektronik, Informationstechnik Elektrotechnik Sensoren optische Sensoren
- Naturwissenschaften Informatik und Informationswissenschaften künstliche Intelligenz maschinelles Sehen
- Technik und Technologie Maschinenbau Produktionstechnik subtraktives Fertigungsverfahren
- Naturwissenschaften Chemiewissenschaften anorganische Chemie Nachübergangsmetalle
- Naturwissenschaften Naturwissenschaften theoretische Physik Teilchenphysik Photonen
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Daten nicht verfügbar
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Daten nicht verfügbar
Koordinator
17674 KALLITHEA ELASSONOS
Griechenland
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.