Ziel
- Research into the material has shown that the existing regulations take little account of the problems of the appearance of the concrete. As to the colour, hygrometry of concrete has a considerable impact on this parameter. The studies deal with and progress standardization of the quality of facings and the colour of concrete.
- Work on the fabrication unit has revealed the use of new materials for the forms (glass fibre plus polyester resin) together with new non-destructive fixing methods. These considerably reduce the cost of formwork and therefore the finished product so that it remains competitive in spite of the much smaller production runs. These new materials will alter working methods. Their use must be accompanied by a training programme for operators.
The study of the fabrication unit has led to the definition of the concept of an innovative, adaptable, ergonomic and autonomous work station which is also economically viable.
- The work on the finishing unit has illustrated the feasibility of adapting a conventional industrial robot to a hostile environment (presence of sand, acid), and to very small production runs (10 units).
This first introduction of robotics to the building industry has shown the complexity of adapting a robot to the requirements of a building site. A study of a fixed site has offered a preliminary experience in possible use on a full construction site.
- The concept of the "know-how bank" developed in our project has been extremely fruitful. It has led to a radically new approach to the design of IT systems by encouraging in the company a certain critical introspection of its trade, its practices and even its relations with other economic actors. This introspection could be used both to protect past experience, and to approach the future more confidently. It integrates into a quality approach.
The concept can be readily applied to other fields.
Computer-assisted production has shown the advantages which may result from a coherent and reactive IT system with, inter alia, detailed management per job and per item, together with reflection and assistance into balancing out the work load.
(i) Design of a flexible prefabrication work station and a flexible mould.
Design of one several flexible moulds, geometrically changeable, and their environment, for manufacturing complex shapes and diverse relief. Research on the materials of the moulds (metal, composite, resin, wood, plastic, polymer, etc) to substitute the changeable parts of the moulds, currently reusable, by readjustable, mouldable, recyclable materials.
(ii) Design of a finishing work station around a multifunctional and flexible finishing robot.
Adaptation of available robots to a "hostile" environment (outside, dust, water, acid, etc.) equipped with a claw capable of holding finishing tools. Design of an intermediate system between 100 % manual apparatus and 100 % automated. Multifunctional for 3 finishing treatments (washing, brushing, standing) realized with 4 finishing tools (sand hose, high pressure hose, rotary metal brush system, simple brush with acid jet).
(iii) Production and test on a pilot site of two prototypes : flexible mould and finishing robot
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Technik und Technologie Werkstofftechnik Farben
- Naturwissenschaften Chemiewissenschaften Polymerwissenschaft
- Technik und Technologie Werkstofftechnik amorphe Feststoffe
- Technik und Technologie Elektrotechnik, Elektronik, Informationstechnik Elektrotechnik Robotertechnik
- Agrarwissenschaften Landwirtschaft, Forstwirtschaft und Fischerei Forstwirtschaft
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Daten nicht verfügbar
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Daten nicht verfügbar
Koordinator
13009 MARSEILLE
Frankreich
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.