Ziel
The final strategic objectives of this project are the reduction of costs of electrical production in Europe and the increase of overall competitiveness of European Industries.
The technical goal of this project is to develop automatic procedures dedicated to repair the damage to turbine components by welding and cladding with a CO2 laser robot. These procedures will include automatic acquisition of damages mapped with conventional methods and self-programming of the robot in order to improve the productivity of the system.
This subsystem will DMSS (Damage Management SubSystem).
This proposal conforms with the aims and the objectives of the following priority themes in the BRITE/EURAM Information Package :
- 4.2.4. development of CO2 laser processing procedures and optical subsystems integrated in robotic structure for welding and surface treatments
- 3.1.3. development of robotic controls for mapping individual damage in each component and then for repairing it by automated cutting, welding and cladding operations as necessary, for economical high integrity refurbishment
- 2.2.3. measurement of service damage contours using non-contact sensors, in the process of refurbishing the component
- 1.1.3. improved creep and fatigue strengths of welded gas turbine components by new, optimized welding processes.
A robotic welding Work Station equipped with a CO2 laser was developed in the Project, integrating a damage monitoring sub-system able to perform a quantitative assessment of the extent, the size and the location of the damage (using a 3D mapping) in high value industrial components. The data resulting by the comparison between the precise 3D contour of the damage with the original topography are used to drive the robotized laser welding device during the repair of the damaged article.
Among the most expensive and critical turbogas parts made of materials with weldability problems, four type of components/materials were chosen for the activity typically affected by different types of damages; both butt-welding of a new insert and cladding were considered, as refurbishment processes.
The CO2 laser robotized system was used to develop repairing procedures to obtain defect-free welds and cladding on the materials of turbine components. Alternative component suitable weld-procedures were also studied for each type of material.
Discriminatory mechanical tests were performed on welded samples obtained with CO2 laser and with the alternative processes. A comparison between these results demonstrates that laser processing gives the best performance in three of the four analyzed materials.
Finally the work station was used to perform automatized refurbishment of real components with the welding procedure developed in the project for the corresponding material class. For these components the cost-effectiveness of the CO2 laser refurbishment system was assessed.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Naturwissenschaften Naturwissenschaften Astronomie Planetologie Astrogeologie
- Sozialwissenschaften Wirtschaftswissenschaften Wirtschaftswissenschaft Produktionswirtschaft Produktivität
- Technik und Technologie Elektrotechnik, Elektronik, Informationstechnik Elektrotechnik Sensoren
- Naturwissenschaften Naturwissenschaften Optik Laserphysik
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Daten nicht verfügbar
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Daten nicht verfügbar
Koordinator
20090 Segrate Milano
Italien
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.