Obiettivo
Objectives and content
Market surveys of the demand for future travel by supersonic transport aircraft have shown that a substantial market exists if the fare levels can be maintained close to those for subsonic transport aircraft. The central issue for a new supersonic transport aircraft is thus the achievement of market viability, to which the proposed research aims to make a major contribution. Considerable improvements in aerodynamic technology are required if a new design for a supersonic transport is to be both viable and acceptable environmentally. Reduction in the level of the drag of a new supersonic transport aircraft is essential to achieve these goals. Thus lower drag at take-off and landing conditions will reduce the engine thrust required and hence the noise generated by the aircraft. At cruise conditions over land and over sea reductions in drag will reduce the fuel required for a given range and hence increase the payload and cost effectiveness. An industrial objective of equal importance to the reduction of drag is the need for an aerodynamic design method that allows rapid completion of a design cycle; a target of 2 days per cycle has been quoted.
The industrial objectives lead to two objectives for the proposed basic research; the identification and validation of a computational method for the accurate prediction of the detailed aerodynamic performance of a supersonic transport aircraft and the assessment of alternative approaches to the aerodynamic design of this type of configuration, including a demonstration of the effectiveness of the chosen method(s) through experimental verification.
In the first technical task several computational fluid mechanics methods, covering a range of fidelity in flow modelling, are to be evaluated for their accuracy and speed of prediction against an existing set of wind-tunnel data for a generic configuration for a supersonic transport aircraft. The outcome of this work will feed into the analysis work in subsequent tasks. In the next stage two linked wing-design tasks proceed in parallel, one task for the transonic/supersonic cruise design and the other for low-speed high-lift design. From these design-method evaluation tasks a single basic wing shape will be selected as the basis for the next task, the design, manufacture and test of a wind-tunnel model. In the final task the experimental data from the model test will be analysed to assess the predictions of the design methods and to compare the aerodynamic performance against the industry objectives. This process will reveal any shortcomings in existing aerodynamic design and analysis tools and identify further needs for technology development. The assessment task will be concluded with the industry partners identifying how the results of the research can be exploited in future feasibility studies for a supersonic transport aircraft.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria meccanica ingegneria dei veicoli ingegneria aerospaziale aeromobili
- scienze naturali informatica e scienze dell'informazione scienze computazionali
- ingegneria e tecnologia ingegneria ambientale energia e carburanti
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
GU14 6TD FARNBOROUGH
Regno Unito
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.