Objetivo
The objective of the ACME project was to develop new technology for PCB manufacture that would have the following advantages:
Reduced cost (through use of simpler/more automated processes and cheaper base materials).
Reduced environmental impact (through the reduction or elimination of toxic pollutants and waste from PCB manufacturing processes).
The project used the principle of "additive" technology to achieve the objectives; this involved the building up of conductive and dielectric layers to form multilayer circuits, thus eliminating the need for complex and environmentally damaging "subtractive" technologies that are currently used.
Two distinct (though inter-related) technologies were involved. For each technology, materials and processing techniques were developed; then test vehicles and demonstrator circuits were built and evaluated:
UV Screen technology - Circuitry with a resolution of around 200 micron track/gap by screen printing and UV curing the conductive and dielectric layers.
Photoimaged technology - Circuitry with a resolution of around 150 micron track/gap by photo-defining a circuit pattern in the dielectric, and then filling this pattern with conductive material.
Cost reduction achievements - The projected cost benefits of ACME have been reduced by the efficiency improvements by most PCB manufacturers during the lifetime of the project; nevertheless, cost savings of 10-20% for the UV and 20-30% for the Photo defined process are possible in many of the target applications that have been identified for exploitation of the ACME technologies.
Environmental achievements - This project has shown that ACME can reduce heavy metal waste by 100%, wastewater by 75% and energy use by 50%. The use of formaldehyde plating baths, and acid or ammoniacal etchants can be eliminated, and the possibility of using recyclable base materials is opened up.
The objectives of this project are to reduce the cost and
environmental impact of present Printed Circuit Board manufacture; this will be achieved by replacement of the current "substrative" technique (forming conduclive tracks by etching away typically 80% of the surface of copper clad panels) with new "additive" technology (i.e. building up of circuitry on base materials layer by layer). The potential benefits to Europe are: Cost Reduction.
Process steps reduced from 28 to 19 or less, use of 50% cheaper base materials, giving overall reduction in PCB production costs of 25%; this in a European market of 3.2 bn ECU which is losing
competitiveness compared to the Pacific Rim.
Environmental Impact Reductions in waste water and solvent emissions by around 10 million l/year, use of formaldehyde plating baths eliminated, as would be use of acid and ammoniacal etchants (80 million l/year). Recycling of base materials (not presently possible) would save 25M ECU per year assuming 10% replacement of current technology.
The project will develop materials and automated processes for the production of two different types of additive circuitry to meet market needs:
i. Lower cost, lower resolution circuitry with 150 250 micron tracks and spaces by screen printing and UV curing of conductive and dielectric layers.
ii. High resolution circuitry with 25 100 micron tracks and spaces by using photoresist techniques.
A patent application covering aspects of this work has been filed by one of the partners; this application concerns a method of anchoring metallic particles to a substrate so that good bond strength between the conductive material and the basic substrate is obtained without sacrifice of conductivity (samples show resistance 1 x 10 5 ohm cm) and such that further treatment gives melting points in the region of 250 300 C thus enabling mass soldering of components without damage to the conductive tracks.
The technical work will be split into six workpackages which cover the development of materials and processes, performance and reliability testing and, finally, verification in demonstration end use
applications that meet identified market needs. A vertically integrated consortium has been formed to carry out the work, consisting of materials manufacturers, a process specialist, a PCB manufacturer, end users from different market sectors and an R. and D. performer. Each partner will contribute to exploitation of the project results in their own specialist field or market sector.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ingeniería y tecnología ingeniería mecánica ingeniería de fabricación
- ingeniería y tecnología ingeniería ambiental gestión de residuos procesos de tratamiento de residuos reciclaje
- ingeniería y tecnología ingeniería ambiental procesos de tratamiento de aguas procesos de tratamiento de agua residual
- ciencias naturales ciencias químicas química orgánica aldehídos
Para utilizar esta función, debe iniciar sesión o registrarse
Le pedimos disculpas, pero se ha producido un error inesperado durante la ejecución.
Necesita estar autentificado. Puede que su sesión haya finalizado.
Gracias por su comentario. En breve recibirá un correo electrónico para confirmar el envío. Si ha seleccionado que se le notifique sobre el estado del informe, también se le contactará cuando el estado del informe cambie.
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
BA3 4RT Bath
Reino Unido
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.