Ziel
The objective of the ACME project was to develop new technology for PCB manufacture that would have the following advantages:
Reduced cost (through use of simpler/more automated processes and cheaper base materials).
Reduced environmental impact (through the reduction or elimination of toxic pollutants and waste from PCB manufacturing processes).
The project used the principle of "additive" technology to achieve the objectives; this involved the building up of conductive and dielectric layers to form multilayer circuits, thus eliminating the need for complex and environmentally damaging "subtractive" technologies that are currently used.
Two distinct (though inter-related) technologies were involved. For each technology, materials and processing techniques were developed; then test vehicles and demonstrator circuits were built and evaluated:
UV Screen technology - Circuitry with a resolution of around 200 micron track/gap by screen printing and UV curing the conductive and dielectric layers.
Photoimaged technology - Circuitry with a resolution of around 150 micron track/gap by photo-defining a circuit pattern in the dielectric, and then filling this pattern with conductive material.
Cost reduction achievements - The projected cost benefits of ACME have been reduced by the efficiency improvements by most PCB manufacturers during the lifetime of the project; nevertheless, cost savings of 10-20% for the UV and 20-30% for the Photo defined process are possible in many of the target applications that have been identified for exploitation of the ACME technologies.
Environmental achievements - This project has shown that ACME can reduce heavy metal waste by 100%, wastewater by 75% and energy use by 50%. The use of formaldehyde plating baths, and acid or ammoniacal etchants can be eliminated, and the possibility of using recyclable base materials is opened up.
The objectives of this project are to reduce the cost and
environmental impact of present Printed Circuit Board manufacture; this will be achieved by replacement of the current "substrative" technique (forming conduclive tracks by etching away typically 80% of the surface of copper clad panels) with new "additive" technology (i.e. building up of circuitry on base materials layer by layer). The potential benefits to Europe are: Cost Reduction.
Process steps reduced from 28 to 19 or less, use of 50% cheaper base materials, giving overall reduction in PCB production costs of 25%; this in a European market of 3.2 bn ECU which is losing
competitiveness compared to the Pacific Rim.
Environmental Impact Reductions in waste water and solvent emissions by around 10 million l/year, use of formaldehyde plating baths eliminated, as would be use of acid and ammoniacal etchants (80 million l/year). Recycling of base materials (not presently possible) would save 25M ECU per year assuming 10% replacement of current technology.
The project will develop materials and automated processes for the production of two different types of additive circuitry to meet market needs:
i. Lower cost, lower resolution circuitry with 150 250 micron tracks and spaces by screen printing and UV curing of conductive and dielectric layers.
ii. High resolution circuitry with 25 100 micron tracks and spaces by using photoresist techniques.
A patent application covering aspects of this work has been filed by one of the partners; this application concerns a method of anchoring metallic particles to a substrate so that good bond strength between the conductive material and the basic substrate is obtained without sacrifice of conductivity (samples show resistance 1 x 10 5 ohm cm) and such that further treatment gives melting points in the region of 250 300 C thus enabling mass soldering of components without damage to the conductive tracks.
The technical work will be split into six workpackages which cover the development of materials and processes, performance and reliability testing and, finally, verification in demonstration end use
applications that meet identified market needs. A vertically integrated consortium has been formed to carry out the work, consisting of materials manufacturers, a process specialist, a PCB manufacturer, end users from different market sectors and an R. and D. performer. Each partner will contribute to exploitation of the project results in their own specialist field or market sector.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Technik und Technologie Maschinenbau Produktionstechnik
- Technik und Technologie Umwelttechnik Abfallwirtschaft Abfallbehandlungsverfahren Recycling
- Technik und Technologie Umwelttechnik Wasseraufbereitungsverfahren Abwasserbehandlungsverfahren
- Naturwissenschaften Chemiewissenschaften organische Chemie Aldehyde
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Wir bitten um Entschuldigung ... während der Ausführung ist ein unerwarteter Fehler aufgetreten.
Sie müssen sich authentifizieren. Ihre Sitzung ist möglicherweise abgelaufen.
Vielen Dank für Ihr Feedback. Sie erhalten in Kürze eine E-Mail zur Übermittlungsbestätigung. Wenn Sie sich für eine Benachrichtigung über den Berichtsstatus entschieden haben, werden Sie auch im Falle einer Änderung des Berichtsstatus benachrichtigt.
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
BA3 4RT Bath
Vereinigtes Königreich
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.