Objetivo
A longer lasting, cost reduced and better osteointegrable orthopaedic knee implant has been developed. The work performed on the application of high power laser surface processing methods has delivered a calcium phosphate coating that shows a graded interface layer between the Ti substrate and the coating consisting of calcium titanate, which provides a good bonding. At the outermost surface the coating composition is hydroxylapatite and its glassy phase. Such a well adhered bioactive coating should promote faster and better osteointegration of implants for bone substitution.
Various processing routes have been explored with two different high power lasers, namely the CO2 and the Nd:YAG laser. The most successful process has been the Nd:YAG laser surface cladding. A patent has already been granted.
A sol-gel process has been developed to produce CaP powder specially suited for laser processing. In compliance to ASTM designation it is a high purity material with crystallinity greater than 99 % and Ca/P ratio of 1.67.
Cost reduction of the implant has been obtained by the introduction of a simpler design and instrumentation together with the use of fully automated 3-dimensional CAD/CAM and Real-Virtual-Real Technologies to fully analytically model, simulate and automate the design and manufacturing of the prosthesis and its coating. Design of 4 sizes of all parts of the knee prosthesis has been completed, and a 15% reduction in the cost of the surgical instrumentation has been achieved.
The prototype of the automated machine was completed and commissioned at the laser-processing site. The CAD model of the design of the knee prosthesis has been added to the simulation display software in order that the part is articulated in reality on the positioning system by simply moving the virtual part displayed on the computer screen.
Clad coatings produced with both lasers underwent three rounds of in-vitro testing, resulting in significant less cytocompatibility & higher cytotoxicity of the CO2 laser produced samples with regard to the Nd:YAG laser clads and plasma sprayed coatings, or the bare titanium used as reference material. In the final complete round of in-vitro testing, it was corroborated that the optimised Nd:YAG clad samples perform statistically comparable to plasma sprayed material. These promising results, together with the good adhesion (>35 MPa) of the coating, and the existence of a fusion bond interlayer between the Ti alloy and the coating has encouraged to conduct in-vivo testing in a sheep model.
Nd:YAG laser clad, plasma sprayed and bare titanium cylindres have been implanted into sheep femur and tibia for 12 and 24 weeks. The bone area around the implants and the bone-implant distance have been measured using hystomorphometrical methods. Both parameters showed no statistically significant difference between the two coated materials, while bare titanium performed worse.
Feasibility of the industrial production of the Nd:YAG laser cladding process has been demonstrated by using the Real-Virtual-Real automation technology to coat the real knee implant prototypes developed within the project. It is expected that after an industrial scaling-up period of 12-24 months, this technology may be ready to initiate clinical trials.
A longer lasting, cost reduced and better osteointegrable orthopaedic knee implant will be developed. The application of high power laser surface processing methods will enable to produce calcium phosphate coatings with better adhesion and higher bioactivity performance in vitro and in vitro. The rapid thermal treatment inherent to these processing routes would remove surface defects and micro cracks typical of machined titanium surfaces. To assure the supply of the CaP precursors appropriate for laser processing, new powder and non-powdery methods will be investigated, using less expensive reactants and eventually eliminating the environmental impact of the standard plasma spray processing. In order to cut down production costs of knee prosthesis a new joint design will be developed, and 3 dimensional CAD/CAM and Real Virtual Real Technologies will be applied to fully analytically model simulate and automate the design and manufacturing of the prosthesis and its coating. Quality control and environmental impact assessment of all partner's activities will be implanted.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ciencias naturales ciencias químicas química inorgánica metales de transición
- ingeniería y tecnología ingeniería de materiales recubrimiento y películas
- ciencias médicas y de la salud medicina clínica ortopedia
- ciencias médicas y de la salud biotecnología médica implantes
- ciencias naturales ciencias físicas óptica física del láser
Para utilizar esta función, debe iniciar sesión o registrarse
Le pedimos disculpas, pero se ha producido un error inesperado durante la ejecución.
Necesita estar autentificado. Puede que su sesión haya finalizado.
Gracias por su comentario. En breve recibirá un correo electrónico para confirmar el envío. Si ha seleccionado que se le notifique sobre el estado del informe, también se le contactará cuando el estado del informe cambie.
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
36200 VIGO
España
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.