Ziel
A longer lasting, cost reduced and better osteointegrable orthopaedic knee implant has been developed. The work performed on the application of high power laser surface processing methods has delivered a calcium phosphate coating that shows a graded interface layer between the Ti substrate and the coating consisting of calcium titanate, which provides a good bonding. At the outermost surface the coating composition is hydroxylapatite and its glassy phase. Such a well adhered bioactive coating should promote faster and better osteointegration of implants for bone substitution.
Various processing routes have been explored with two different high power lasers, namely the CO2 and the Nd:YAG laser. The most successful process has been the Nd:YAG laser surface cladding. A patent has already been granted.
A sol-gel process has been developed to produce CaP powder specially suited for laser processing. In compliance to ASTM designation it is a high purity material with crystallinity greater than 99 % and Ca/P ratio of 1.67.
Cost reduction of the implant has been obtained by the introduction of a simpler design and instrumentation together with the use of fully automated 3-dimensional CAD/CAM and Real-Virtual-Real Technologies to fully analytically model, simulate and automate the design and manufacturing of the prosthesis and its coating. Design of 4 sizes of all parts of the knee prosthesis has been completed, and a 15% reduction in the cost of the surgical instrumentation has been achieved.
The prototype of the automated machine was completed and commissioned at the laser-processing site. The CAD model of the design of the knee prosthesis has been added to the simulation display software in order that the part is articulated in reality on the positioning system by simply moving the virtual part displayed on the computer screen.
Clad coatings produced with both lasers underwent three rounds of in-vitro testing, resulting in significant less cytocompatibility & higher cytotoxicity of the CO2 laser produced samples with regard to the Nd:YAG laser clads and plasma sprayed coatings, or the bare titanium used as reference material. In the final complete round of in-vitro testing, it was corroborated that the optimised Nd:YAG clad samples perform statistically comparable to plasma sprayed material. These promising results, together with the good adhesion (>35 MPa) of the coating, and the existence of a fusion bond interlayer between the Ti alloy and the coating has encouraged to conduct in-vivo testing in a sheep model.
Nd:YAG laser clad, plasma sprayed and bare titanium cylindres have been implanted into sheep femur and tibia for 12 and 24 weeks. The bone area around the implants and the bone-implant distance have been measured using hystomorphometrical methods. Both parameters showed no statistically significant difference between the two coated materials, while bare titanium performed worse.
Feasibility of the industrial production of the Nd:YAG laser cladding process has been demonstrated by using the Real-Virtual-Real automation technology to coat the real knee implant prototypes developed within the project. It is expected that after an industrial scaling-up period of 12-24 months, this technology may be ready to initiate clinical trials.
A longer lasting, cost reduced and better osteointegrable orthopaedic knee implant will be developed. The application of high power laser surface processing methods will enable to produce calcium phosphate coatings with better adhesion and higher bioactivity performance in vitro and in vitro. The rapid thermal treatment inherent to these processing routes would remove surface defects and micro cracks typical of machined titanium surfaces. To assure the supply of the CaP precursors appropriate for laser processing, new powder and non-powdery methods will be investigated, using less expensive reactants and eventually eliminating the environmental impact of the standard plasma spray processing. In order to cut down production costs of knee prosthesis a new joint design will be developed, and 3 dimensional CAD/CAM and Real Virtual Real Technologies will be applied to fully analytically model simulate and automate the design and manufacturing of the prosthesis and its coating. Quality control and environmental impact assessment of all partner's activities will be implanted.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Naturwissenschaften Chemiewissenschaften anorganische Chemie Übergangsmetalle
- Technik und Technologie Werkstofftechnik Beschichtung
- Medizin- und Gesundheitswissenschaften Klinische Medizin Orthopädie
- Medizin- und Gesundheitswissenschaften Medizinische Biotechnologie Implantate
- Naturwissenschaften Naturwissenschaften Optik Laserphysik
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Wir bitten um Entschuldigung ... während der Ausführung ist ein unerwarteter Fehler aufgetreten.
Sie müssen sich authentifizieren. Ihre Sitzung ist möglicherweise abgelaufen.
Vielen Dank für Ihr Feedback. Sie erhalten in Kürze eine E-Mail zur Übermittlungsbestätigung. Wenn Sie sich für eine Benachrichtigung über den Berichtsstatus entschieden haben, werden Sie auch im Falle einer Änderung des Berichtsstatus benachrichtigt.
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
36200 VIGO
Spanien
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.