Ziel
This proposal concerns the development of an improved relatively inexpensive. environmentally friendly spinel CA6 bonded high alumina refractory which increases the life span of ladle lining and allows more cleanness of the steel in secondary treatments. The Programme is expected to be achieved within 48 months.
The spinel high alumina materials have shown good potential by dramatically increasing the life span and the stability of ladle lining compared to the basic and high alumina materials traditionally used as refractories. Other possible applications are in Portland cement rotary kilns, waste incinerator furnaces or in glass furnace heat exchangers.
By investigating routes using inexpensive raw materials and cost saving processes the project aims to increase the use of spinel content refractories. The project will explore an innovative way of obtaining a reliable refractory not only in a shaped fomm but also in an unshaped form ( castable monolithic lining).
By studying the ternary diagram Al2O3 MgO CaO the basic research will focus on specific chemical range compositions. Behaviour of selected matrixes within the high alumina zone of the diagram against molten steel and slag attacks and the respective mechanisms of corrosion and penetration at operating temperatures (1650 C ) will be studied.
To obtain the refractory matrixes different processing routes will be focused on, using selected raw materials. The preparation of these raw materials will also be studied. The innovative Doloma plus Alumina route will be particularly investigated in order to obtain an economically advantageous refractory cement.
The matrixes will be selected and characterised by studying the physical chemical properties. the thermo mechanical behaviour and the microstructure features.
The refractory product will be obtained by adding mixtures of alumina to the previously screened matrixes. Then the qualification of the raw materials, the procedures and the manufacturing technology for pressed shaped bricks and for castable refractory products will be stated. The final characteristics and specific refractoriness properties will be measured. Resistance to corrosion and penetration against molten steel and slag attacks will receive special attention.
To complete the project, pre industrial scale trials will be carried out in steel factories by lining ladles at different stages of the secondary steel process in order to verify all the parameters previously established at laboratory scale. Assessments will be made concerning lining procedures, repair compounds application, pre heating and firing conditions. In addition, the behaviours of the fired and the unfired shaped linings and the concrete monolithic lining will be compared. Special attention will be paid to resistance against penetration, corrosion, wear rate, thermo mechanical properties and spalling effects under operating conditions.
A suitable technology of specific monolithic ladle lining including procedures of installation and pre heating schedule will be
established with the cooperation of refractorist and user.
Finally, a technical economic balance sheet will be established comparing data to current refractory ladle lining.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Naturwissenschaften Chemiewissenschaften anorganische Chemie Erdalkalimetalle
- Technik und Technologie Werkstofftechnik amorphe Feststoffe
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
33400 Asturias
Spanien
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.