Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano italiano
CORDIS - Risultati della ricerca dell’UE
CORDIS
Contenuto archiviato il 2024-06-10

Production of polymers with a low residual monomer and solvent content

Obiettivo



Objectives and content
One of the key challenges faced by the polymer industry
is the need to reduce the residual monomer and solvent
content in polymeric formulations. The present
multi-disciplinary research programme aims at the
investigation of the basic chemical and physical
mechanisms involved in the reduction of residual monomers
and other VOCs content to the lowest possible levels and
the development of methodologies for the implementation
of more efficient processes for monomer and nonpolymerizable VOC removal. This will allow meeting
current and future market needs an environmental and
health protection regulations.
One important class of polymers to be considered in the
project is dispersion polymers obtained by the emulsion
polymerisation of acrylic and vinyl monomers. These
polymers are used in aqueous dispersions such as paint,
adhesives and impact modifiers. Another classes of
polymers are those obtained by mass or solution
polymerisation of acrylic styrenic and olefinic monomers.
In the present project, the research efforts will be
specifically focused on the following scientific and
industrial objectives:
Producing acrylic emulsions with less than l OO ppm of
residual monomers and less than l,OOO ppm of total VOCs.
Producing polyacrylics and polystyrenics by mass or
solution polymerisation with the same requirements as
above for levels of residual monomers and VOCs.
Reaching low levels of VOCs in vinyl/acrylic emulsion
copolymerisation, typically being under 500 ppm of
residual monomers and 1,500 ppm of VOCs. It should be
noted that this case is much more difficult than the
previous one because we deal with monomers that have
different reactivities. Moreover, due to the high water
solubility of vinyl acetate, its level generally remains
quite high in aqueous dispersion processes.
Reducing the levels of VOCs in suspension
polymerisation styrene/acrylonitrile copolymers to a
maximum of 200 ppm.
Reaching a total VOC level of 200 ppm in the solution
copolymerisation of styrene/maleic anhydride.
Fundamental investigation of free-radical
polymerisation at high conversions. Study of the
diffusion-controlled termination, propagation and
initiation reactions.
Fundamental investigation of phase equilibria in
polymer-monomer-solvent mixtures.
Development of predictive mechanistic models to
describe the monomer / solvent removal in reactors and
devolatilisation equipment.
Additional benefits will include substantial savings in
the raw materials during the manufacturing process, as
well as improvement of the produced polymer quality,
including optical and mechanical properties, processing
characteristics smell, etc. All the results of this
study will have direct and immediate implications on the
more efficient reduction of residual monomers and other
VOCs, in order to meet the increasing safety and antipollution regulations.
The proposal addresses the general Technical Area 1
(Production Technologies) in the workprogramme. More
specifically, the development of low residual monomer and
solvent process technologies conforms with Point 1.2
(Development of Clean Production Technologies) and the
Principal Research Tasks 1.2.1.S (Reduction of hazardous
materials such as organic solvents and other harmful
compounds) and 1.2.3.S (Incorporation of new technologies
and materials into production processes and equipment for
significant limitation of emissions and overall pollution
at production sites).

Campo scientifico (EuroSciVoc)

CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.

È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione

Programma(i)

Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.

Argomento(i)

Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.

Invito a presentare proposte

Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.

Dati non disponibili

Meccanismo di finanziamento

Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.

CSC - Cost-sharing contracts

Coordinatore

Universidad del País Vasco
Contributo UE
Nessun dato
Indirizzo
3,Paseo Ramón De Lardizabal (Ibaeta) 3
20009 San Sebastián
Spagna

Mostra sulla mappa

Costo totale

I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.

Nessun dato

Partecipanti (6)

Il mio fascicolo 0 0