Obiettivo
Objectives and content
The aeronautical industry needs to reduce the cost for
verification of composite structures to maintain the
European share of the market. Current verification
procedures are to a very large extent based on testing
both for material qualification and establishment of
design data, as well as for static and fatigue life
substantiation. Single companies can only make minor
improvements to the verification procedure while a joint
programme in which aeronautical industries and research
institutes are working together can take a huge step
ahead.
The primary objective of the EDAVCOS programme is to
determine a cost efficient route to certification for
composite aircraft structures. The means is a validated
analysis based procedure for structural verification from
initial design to final certification. The targets are
50% reduction of the total cost for verification and 60%
time scale reduction.
The programme will consist of a method development part,
an application and validation part, and a procedure
definition part. The objective of the methods
development part is to develop and validate fewer tests
demanding design methods and new test procedures
incorporating e.g. truncation and elimination criteria
for fatigue testing. The reduction of the amount of
testing and time spent in testing will be achieved by the
development and validation of analytical and numerical
tools suggested within this programme. The starting
point for this research is the large amount of promising
research results obtained by the partners within several
nationals and international research programmes. The
major part of these methods have only been applied and
validated at the coupon level and have therefore not been
applied in the development of real aircraft structures.
The strong participation of research institutes in this
programme will give the right conditions for development
of methods, which will reach the level of structural
application. The methods developed will be applicable to
generic wing and fuselage structures comprising stiffened
panels, sandwich panels, shear webs and bolted joints.
The objective with the application and validation part is
to demonstrate the applicability and validity of the
methods on benchmarks; representative of the generic
structural elements mentioned above which will be tested
in the programme. The tests will be well instrumented
and post-mortem failure analyses of the specimens will
give valuable information about the failure modes, which
can be used for further improvement of the analysis
methods. The objective with the procedure definition
part is to define a new verification procedure based on
the increased analysis capability achieved in the methods
development part and new approaches for fatigue testing,
handling of impact damages, and environmental effects.
This part of the programme will be carried out with
support from appointed airworthiness experts.
In addition to the targeted overall cost and time scale
reduction for verification of composite aircraft
structures a reduction of the life cycle cost is
anticipated due to the increased analysis capability.
The increased analysis capability will also lead to
weight savings since more accurate computations allow
conservatism to be reduced simultaneously as the overall
safety level is increased.
This programme will significantly contribute to the longterm objectives set for Aeronautical Technologies in the
IMT work programme and especially 3A3.14 with respect to
cost efficiency, weight reduction and safety.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria meccanica ingegneria dei veicoli ingegneria aerospaziale aeromobili
- ingegneria e tecnologia ingegneria meccanica ingegneria dei veicoli ingegneria aerospaziale ingegneria aeronautica
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
581 88 LINKOEPING
Svezia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.