Obiettivo
Objectives and content:
The production of plastic components û at sight û, such as a car panel, can be divided into two main steps:
- A first step of moulding which allows to achieve the required shape and mechanical characteristics for the component;
- A second step of surface coating which has to provide protecting and/or decorating coats. Currently the plastic part manufacturers will use mainly two different types of plastic -raw materials to mould indoor and outdoor parts:
- ABS / PC and;
- PP (Polypropylene).
The decorative and/or protective coating will be done using solvent borne paints. Among the surface finishing process presently used to apply protective and/or decorative coatings, a world wide increasing importance is assuming the plastic-parts painting process for interior and exterior parts, which is used in many industrialised countries. In fact, the painting process provides coatings with practically numberless patterns of surfaces, having also complex shapes a high curving, so giving the possibility of developing many solutions otherwise are unthinkable with current technologies. In the present situation of high competivity in many industrial sectors, in particular in the automotive industry, this process could give the companies a significant point of differentiation. Presently the main factors which are limiting plastic paint application are the high level of coating costs because of need pre-treatment for PP-materials to get a good adherence and also a high level of environmental impact by organic solvents included in the currently used paint materials. A further point of view is the high level of waste of painted and unpainted parts using process, which is state of the art today. The constitution of the consortium will be, to increase the production of any partner in the automotive and other markets by using new process of moulding and painting Polypropylene with waterborne paints. This new process should decrease the costs production and also the environmental impact. Although there will be included market known materials, it is very important to know, that no of these products (waterborne paints) and / or processes will be used up to now in the industrial market.
%In this framework the main objectives of the proposal are:
- To optimise the whole coating cycle from moulding phase to quality control support, based on ABS/PC and PP ABS/ required by high class automotive factories like BMW; PP required by medium and low class cars like Opel Astra;
- To reach the target of innovative waterborne clear coats (now developed only for 75%);
- To develop a waterborne ûNo-flame- Primerú;
- To develop a new PP (which enables a coating without special treatment and aless amount of Talkum );
- To reach Qualifications in ISO 9001 and ISO 14000Targets;
- Increased ability in production of plastic components with very highesthetical needs in automotive fields;
- Saving product costs - 20%;
- Saving scraps and reworking - 40%;
- Quality improvement +40%;
- Saving time to market - 25%;
- Increasing in Recycling + 50%;
- Annulling Environmental Problems in agreement to ISO 14000;
- Increasing market opportunities. BE97-4696
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- scienze umanistiche arte arti visive
- ingegneria e tecnologia ingegneria meccanica ingegneria dei veicoli ingegneria dell'autoveicolo
- ingegneria e tecnologia ingegneria dei materiali rivestimenti e pellicole
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
31046 CAMINO
Italia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.