Obiettivo
Objectives and content:
The manufacturing industries of engineering components involving micro-drilling are presently facing two main challenges: the capability of drilling smaller holes than those actually achieved with the available techniques and the capacity of increasing productivity and decreasing costs in the micro-drilling operation. Both challenges have a common answer: new technologies or improvement of actual performances of existing technologies. Mechanical drilling, ECM (Electro-Chemical Machining), EDM (Electro-Discharge Machining) and Nd-YAG laser drilling are well established technologies used industrially to drill holes in the range of 150m to few millimetres. The micro drilling of harder materials (500 HV), using conventional techniques is presently limited to 125 m. However, several applications, as for example in the aeronautics (turbine components: combustors and turbine blades), automotive (diesel nozzles injectors), microelectronics and medical fields, would significantly benefit if the actual technological constraints to drill smaller holes will be overcame. On the other hand, developments in the existing technologies able to provide higher production rates and better process control, would prove to be an important step forward in the existing technologies performance .In a highly competitive industry such as the aeronautics where the manufacturing of combustors involve the drilling of many thousands of holes with diameters in the range of 400-600 m, the development of processes that would allow the drilling of smaller holes at higher production rates would represent an vital step forward. A trend for the future of the automotive industry is the development of direct injection petrol engines, for which is crucial to develop manufacturing systems able to perform holes, perpendicular and oblique to the injector, with an average 80 m diameter in order to increase fuel efficiency and reduce pollution levels. The electronics industry is another potential industry whose development towards higher miniaturisation requires higher machining precision to resistor trimming and mi.
This proposal is developing from a successful CRAFT feasibility award, whose main objectives were the searches of new technological solutions for the high precision machining and micro-drilling of engineering materials. The feasibility study showed the potentiality of different advanced techniques to fit industrial objectives. The laser, electro-discharge machining and electron beam were the processes explored. Therefore, the ultimate goal for the present project is twofold: the development of technologies which will allow the micro-drilling of holes lower than 125 m in diameter, in metallic materials with thickness around 1 mm, and the development of existing and industrially established technologies to allow higher processing speeds and better processing control. Conformance with health and safety legislation is a common issue to both research directions.
The industrial objectives pursued by the present project are:
- development of the electron beam process for micro-drilling of large batches with high production rates;
- development of the copper vapour laser (CVL) and doubled frequency Nd:YAG laser (green laser) processes to industrial reliable systems by means of parameter control and definition of technical strategies;
- assessment of EDM technology as a reference process to compare developments to be achieved in other technologies.
The processes development is expected to lead to consistent, reproducible and controlled techniques to perform holes with diameters lower than 100 m, with good geometrical characteristics(circularity and parallelism). Although, very dependent on the envisaged application it is expected that the proposed developments lead to improvements in production by a factor of 5-10 compared to existing technologies and to an increase in quality in terms of being able to decrease the size of holes by a factor of 2.At the end of the project, 2-3 years of tests and additional development are expected to be necessary for industrial implementation of the processes underresearch. BE97-4661
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria meccanica ingegnerizzazione dei prodotti produzione sottrattiva
- ingegneria e tecnologia ingegneria meccanica ingegneria dei veicoli ingegneria dell'autoveicolo
- ingegneria e tecnologia ingegneria meccanica ingegneria dei veicoli ingegneria aerospaziale ingegneria aeronautica
- ingegneria e tecnologia ingegneria ambientale energia e carburanti
- scienze naturali scienze fisiche ottica fisica dei laser
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
BH25 6IQ Bournemouth
Regno Unito
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.