Ziel
Expected deliverables were:
- Brand of polyurethane susceptible to be developed;
- Brand/s of powders which are capable to make the above mentioned brand of polyurethane conductive (that is to say, lowering resistivity from 1012 Ohm-cm to 105-104 Ohm-cm).
Experimental injection system implementing the injection process with doped powders, as well as the system for properly disposing the powders over a predefined 2D or 3D pattern (functional gradient process).
Industrial workpieces injected and doped through the above mentioned process, and showing the above mentioned conductivity performances in the doped sections of the pattern, using them for practical applications.
All the above mentioned expected deliverables have been achieved, and more. In particular:
- The resistivity has been lowered down to 103 Ohm-cm, in industrial workpieces, and down to 100 Ohm-cm in test samples, thus opening up further industrial exploitation possibilities (EMI screening) than initially envisioned;
- Alternative techniques, such as carbon-fiber doping, have been investigated.
Objectives and content
The utilisation of plastic materials in industrial
manufacts has been experimenting a very sharp growth in
the last decades. This is true, in general, for all
kinds of plastic materials, which have seen their fields
of application gradually increased from simple, consumeroriented objects up to large and complex workpieces, with
elevate structural characteristics of mechanical and
thermal resistance. One typology of manufacts, however,
has so far been unable to fully profit of the large-scale
of plastic materials, this typology is, in general,
constituted by all the manufacts and workpieces requiring
high electrical and/or thermal conductivity, in order to
perform their functional role. This makes the
application of plastic materials, other than for
insulating purposes, quite difficult to apply to a large
spectrum of products and market sectors.
It is evident that the availability of a plastic material
with good electrical and/or thermal conductivity
performances could open completely new possibilities for
the utilisation of plastic materials, up to configure
itself as a revolutionary innovation in the fields of
materials technology, which could lead to very relevant
improvements in the characteristics (weights, costs,
etc.) of electrical devices.
The current project proposal has just the purpose of
developing a variety of plastic material provided with
high electrical and thermal conductivity, for use in the
injection mould of industrial plastic workpieces. This
proposal, which is the result of extensive and in-depth
preliminary work performed by one of the partners, work
which has ascertained the theoretical feasibility of this
development, will have the objective of both developing
the material above mentioned, (which will be obtained, in
general terms, through the doping with metallic powders
of a newly configured, polyurethane-based plastic
material), and the process through which this material
will be usable, thus resulting, at project's end, into
the development of actual workpieces suitable for
industrial use.
The project is carried over by an industrial consortium
composed by some of the most representative European and
World realities in the development and processing of
plastic materials, as well as by some leading European
research institutes in plastic technologies. The
partners are extremely determined to pursue the
commercial exploitation of project results, and have the
capabilities to perform this exploitation on a worldwide
basis.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
31046 Oderzo Treviso
Italien
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.