Ziel
European commercial industries need the development of lighter components with improved characteristics and easy recyclability for the next future, in order to develop more efficient products with reduced pollutant emmisions, at low cost. In this way, the industrial aim of the present project is to obtain low cost components with improved properties in the needed areas. In order to reach this goal, a suitable production process for the manufacturing of aluminium based components locally reinforced with inserts, in the zones where an improvement of some properties is required, will be developed. Different type of inserts (of various shapes and characteristics) will be used for this purpose. Among them, it is intended to use inserts made of commerdal discontinuous metal matrix composites (MMCs) formed by gravity casting, and porous prefomms made of low cost discontinuous reinforcements such as alumina short fibers, graphite particles or others. Some high productivity techniques have been previously selected: Low-pressure casting, Pressure diecasting and Gravity casting, which are traditionally and widely used for the manufacturing of several industrial components in commercial sectors, specially in the automotive one. The use of local reinforcements with the techniques selected will allow to manufacture components with improved properties in the required areas, at a low price in comparison with the same components fuily made of MMC. Moreover, the cost due to the machining will be markedly reduced since only localized small areas will be reinforced with inserts. These areas show better mechanical properties at high temperatures, and specially better wear behaviour, among other interesting advantages. The technology considered could also open up an important market of applications for aluminium alloys, since applications which are not presently feasible due to their iow mechanical or wear properties compared with steel or cast iron, could be produced with light aluminium alloys partially reinforced with inserts.
European commercial industries need the development of lighter components with improved characteristics and easy recyclability for the next future, in order to develop more efficient products with reduced pollutant emmisions, at low cost. In this way, the industrial aim of the present project is to obtain low cost components with improved properties in the needed areas. In order to reach this goal, a suitable production process for the manufacturing of aluminium based components locally reinforced with inserts, in the zones where an improvement of some properties is required, will be developed. Different type of inserts (of various shapes and characteristics) will be used for this purpose. Among them, it is intended to use inserts made of commerdal discontinuous metal matrix composites (MMCs) formed by gravity casting, and porous prefomms made of low cost discontinuous reinforcements such as alumina short fibers, graphite particles or others. Some high productivity techniques have been previously selected: Low-pressure casting, Pressure diecasting and Gravity casting, which are traditionally and widely used for the manufacturing of several industrial components in commercial sectors, specially in the automotive one. The use of local reinforcements with the techniques selected will allow to manufacture components with improved properties in the required areas, at a low price in comparison with the same components fuily made of MMC. Moreover, the cost due to the machining will be markedly reduced since only localized small areas will be reinforced with inserts. These areas show better mechanical properties at high temperatures, and specially better wear behaviour, among other interesting advantages. The technology considered could also open up an important market of applications for aluminium alloys, since applications which are not presently feasible due to their iow mechanical or wear properties compared with steel or cast iron, could be produced with light aluminium alloys partially reinforced with inserts.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Technik und Technologie Werkstofftechnik Fasern
- Technik und Technologie Werkstofftechnik Verbundwerkstoffe
- Technik und Technologie Maschinenbau Produktionstechnik subtraktives Fertigungsverfahren
- Naturwissenschaften Chemiewissenschaften anorganische Chemie Nachübergangsmetalle
- Sozialwissenschaften Wirtschaftswissenschaften Wirtschaftswissenschaft Produktionswirtschaft Produktivität
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
31160 Orcoyen
Spanien
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.