New procedure for the manufacturing of thin- walled PTFE pipes

Ziel

This proposal has already been submitted to the European Commission under the proposal number BEST-2988. After the rejection message, all remarks and recommendations of the experts are considered. At the present time, there is no cost-effective procedure to produce thin walled PTFE pipes. Therefore the RTD goal of this project is to develop a new procedure which promise - an optimisation of the manufacturing time (reduction of more than 40%), - more economical use of the material consumption and - a reduction of the minimal wall thickness of less than 1 mm. The range of applications for thin walled PTFE pipes reaches from heat exchangers for incineration plants up to desalination systems for ships etc. Simultaneously with a reduction of the production costs the results of the research promise a decrease of the mass and a raise of the efficiency of the descripted aggregates.

Wissenschaftliches Gebiet

Programm/Programme

FP4-BRITE/EURAM 3 - Specific research and technological development programme in the field of industrial and materials technologies, 1994-1998

Thema/Themen

0101 - Incorporation of new technologies into production systems

Aufforderung zur Vorschlagseinreichung

Data not available

Finanzierungsplan

EAW - Exploratory awards

Koordinator

SCS srl

EU-Beitrag

Keine Daten

Adresse

via Magnanelli 6/3
40033 Casalecchio di Reno BO
Italien

Links

Website

Gesamtkosten