Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS
Contenuto archiviato il 2024-04-30

Cathodic protection system for reinforced concrete structures

Obiettivo



The primary goal of this project is to develop and prove that a replaceable cathodic protection (CP) system for new reinrorced concrete structures is economic and practical. To reach these objectives the research will concentrate on the development and proving of replaceable anodes to be placed in new concrete structures and an associated power supply.

It is intended that the research is split into four separate parts, namely:
- manufacture and commissioning of a reinforced concrete test unit to assess the performance of the trial CP system in reinforced concrete;
- design and testing of the chemical which will provide the interface between the anode and the reinforced concrete;
- development of a simple and effective power supply which will make full use of the capacitive electrical qualities of concrete;
- development of an anode which can be in stalled simply and economically in a reinforced concrete structure, and can also be replace or serviced at intermediate intervals. On completion of this project it is intended that a full commercial system will be developed and this w ill be sold globally to the civil engineering market. The primary goal of t his project is to develop and prove that a replaceable cathodic protection (CP) system for new reinforced concrete structures is economic and practical. To re ach these objectives the research will concentrate on the development and proving of replaceable anodes to be placed in new concrete structures and an associated power supply.

It is intended that the research is split into four separate parts, namely:
- manufacture and commissioning of a reinforced concrete test unit to assess the performance of the trial CP system in reinforced concrete;
- design and testing of the chemical which will provide the interface between the anode and the reinforced concrete;
- development of a simple and effective power supply which will make full use of the capacitive electrical qualities of concrete;
- development of an anode which can be installed simply and economically in a reinforced concrete structure, and can also be replace or serviced at intermediate intervals. On completion of this project it is intended that a full commercial system will be developed and this will be sold globally to the civil engineering market.

Campo scientifico (EuroSciVoc)

Programma(i)

Argomento(i)

Invito a presentare proposte

Dati non disponibili

Meccanismo di finanziamento

CRS - Cooperative research contracts

Coordinatore

Grönvold & Karnov AS
Contributo UE
Nessun dato
Indirizzo
10,Torbenfeldvej
2665 København
Danimarca
Costo totale
Nessun dato

Partecipanti (5)