Ziel
This application has been prepared with the support of both an Exploratory Award and a Research Feasibility Study. The project aims to further the capability of rotational moulding by developing both the process, and a superior, intelligent, online control capability. The ultimate deliverable will be the development of new prototype machinery for the rotational moulding industry. The machinery will incorporate (a) innovative heating/cooling devices, and (b), the intelligent monitoring and control of the dynamics, heating and pressure involved in the rotational moulding process. The project will enable the production of higher value goods with more complex structures and faster cycles than is currently possible. It will allow the production of multi chamber, multi coloured and larger products of variable thickness, and will increase the use of new materials, such as cryogenically ground and recyclable polymers. It will permit entry into new markets in which other polymer processing methods (eg injection moulding, blow moulding) are technically unable to break into, therefore increasing consumer choice. In existing niche markets, it will also place rotational moulding with its low unit costs at a comparative cost advantage to the alternative polymer processing techniques. Due to its low start up costs, rotational moulding is dominant amongst small and medium sized enterprises in Europe (87% of companies are SMEs 1). The results of the project will have direct influence upon the core SMEs, and through its exploitation, an impact on SMEs who are not directly involved in the project. It is estimated that the project has the potential to reduce cycle times in rotational moulding by 50% and increase turnover by 33 %. It will have an environmentally positive impact, particularly compared to other polymer processing techniques because there is no waste involved in the process, and it is estimated that it will allow increased processing of recyclable plastics (up to 50% of production). The project will also act as a driver for technological development in the supply of raw materials. Technically the project, as informed by the research feasibility study will be developed over a four staged process3. Initially it will investigate and establish optimum approaches to mould heating and cooling during the manufacture of products by rotomoulding. This work will complement an investigation into mould design and the use of finite modelling techniques; it will analyse the relationship between mould design and controlled heating and cooling and pressurisation. Such factors will increase cycle times and moulding quality. Phase three will bring together the work identified above, in order to establish superior strategic control strategies and an advanced man machine interface to control the manufacture of complex shaped, multi colour, multi thickness and multi polymer components. These technological developments will be finalised into the production and testing of a pre competitive prototype. Constantly underlying the project will be the necessity to utilise the developments in real time commercial applications, and to maintain the low unit cost of rotational moulding compared to other polymer processing techniques. It is estimated that there will be a return on the ECU 600m investment within one year following the implementation of commercial exploitation.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Technik und Technologie Werkstofftechnik Farben
- Technik und Technologie Maschinenbau Thermodynamik
- Naturwissenschaften Chemiewissenschaften Polymerwissenschaft
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
NG24 4TR Newark
Vereinigtes Königreich
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.