Obiettivo
The project is intended to demonstrate the viability of incorporating optimal energy conservation technology in a city centre commercial development. The building has been designed to minimize undesirable heat gains and losses and to maximise the use of solar energy both directly in the form of heat, light and wind energy and indirectly by using wind, stack effects and night-time radiation to aid ventilation and cooling. Cooling will be aided by the suppression of core temperatures using ground water and by "canyon" convection effects. Use will be made of specially selected indoor plants to condition the interior environment and to clean, filter and condition ventilation air at the point of intake. Construction materials are being selected on the basis of minimum environmental impact of raw material production and manufacturing processes. These objectives have been a fundamental part of the design process from the outset of the project.
The project will involve the construction of a 1600 square meter commercial building that has been designed to demonstrate the commercial viability of integrated advanced energy and environmental conservation technologies.
The basement floor will incorporate a large water filled thermal reservoir. This will be used to store hot and cold energy generated at night using an electric heat pump and roof mounted radiant panels. External walls are massive block and brick construction with 100 mm insulation fixed to outer leaf. The roof is a complex construction incorporating a large opening roof-light system and an array of solar photovoltaic, solar thermal, radiant emission and wind generating devices. The large roof-light will open up automatically in warm and dry conditions converting the heavily planted sunspace into an external courtyard. In cold or wet conditions the roof-light will close to protect the interior from rainfall and to conserve energy. Air will be drawn into the building through zones of specially selected densely planted vegetation designed to entrap particulate material and "refresh" incoming city air. The central sunspace will contain racks of vegetation designed to naturally maintain optimal relative humidity and CO2 levels.
A heat pump will be used to generate hot and cold energy at night during extreme conditions using low cost night-rate electricity operating at a coefficient of performance of between 2.5 to 4. This energy will be stored in a short term thermal reservoir for release during the day-time. The energy stored in this reservoir will be distributed throughout the structure of the building using a system of large diameter embedded pipes. This thermal reservoir and energy distribution system will double up as a sprinkler fire control system.
30% window to wall areas are used to optimise solar gain/heat loss ratios and daylighting. The windows be very high quality double glazed argon filled units in timber frames designed to minimize thermal bridging. Shading, light shelves and inverted venetian blinds will be used to make use of daylight.
Ventilation will be achieved primarily by wind and stack effect-aided internal pressure gradients. The basic components of this system are a roof mounted air movement system, an active full height sunspace, electronically controlled vents through internal walls, fenestration units and a photosynthetic air "reconditioning" system. It will consist of banks of specially selected foliant species with high CO2 to O2 conversion capacities. They will be fed and watered automatically. Their output will be "controlled" by adjusting lighting levels. The air movement system uses a combination of wind pressure, stack effect and electric fans to draw in and extract air at high level during winter.
The electric lighting installation features advanced energy-efficient technologies designed to compliment daylighting. High-frequency fluorescent lamps will provide background illuminationof 160 lux.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
Questo progetto non è ancora stato classificato con EuroSciVoc.
Suggerisci i campi scientifici che ritieni più rilevanti e aiutaci a migliorare il nostro servizio di classificazione.
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
2 Dublin
Irlanda
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.