Ziel
The evenness of geometric parameters of a textile like thickness, density of warp and weft define its final quality. Principally given by the primary construction these parameters are sometimes object to heavy changes due to processes in the finishing industry. A prime example is the heat-setting of a fabric in the stenter frame, where the effective thread density can be controlled by machine parameters. Although aimed at in close tolerances, the lack of on-line sensor and control systems results in machines set up by experience and trial and in varying thread densities within lengths of textile. As common method the final thread density is taken by off-line analysis from the finished product. Accordingly no real control of the geometry effects of the stenter process is possible today. The needed fast on-line measurement of the thread density has been made possible by a new sensing on the basis of optical profilometry. This measuring technique provides the tool for an integrated sensing and control system for pre-setting machine parameter of the stenter frame and other continuous processes.
It is the scope of the proposed project to set up a complex system of these low-cost sensors for thread density monitoring at various stages in the machine and to design an intelligent control circuit for automatic set up and on-line control of machine parameters.
A prototype intelligent multi-sensor system based on a low-cost, geometry sensitive type of sensor for the fast on-line measurement of the thread density of the textiles at industrial process speeds was designed as a precompetitive development.
On the reasons of cost, measuring speed and performance, optical profilometry was chosen as the measuring principle. Sensors (based on the triangulation priciple) were specially manufactured for the application. Fast and reliable evaluation of the time dependent signal train recorded by the sensors was achieved by means of a software-based, mathematical frequency analysis.
To achieve the various tasks of signal recording and analysis of the isolated sensors in continuous mode and in real time a hardware concept of modular architecture was developed in order to divide the sensing, controlling and analysing tasks to individual components, which can act simultaneously.
The actual performance of the multisensor design was tested under industrial conditions. The experimental system yielded a very high accuracy for geometry recordings in the region of +/- 2% under industrial conditions with machine speeds up to 140 meters per minute, with very fast analysing cycles appropriate for on-line measurements. No influence of fabric movement was detected at machine speeds. Samples with a rms-deviation in excess of 2 %, i.e. non-constant geometry with a danger not to meet tolerances, or too high or low mean values, i.e. failure to meet the customer specified set-value, could be identified.
In the frame of actual control experiments the controlling feedback was taken from a sensor placed at the machine's exit to the overfeed control. As could be clearly shown, arbitrary changes of the set values resulted in automatic reaction of the overfeed control. At all times the effective mean number of threads per cm equalled the set values.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Technik und Technologie Elektrotechnik, Elektronik, Informationstechnik Elektrotechnik Steuerungssysteme
- Technik und Technologie Werkstofftechnik Textilien
- Technik und Technologie Elektrotechnik, Elektronik, Informationstechnik Elektrotechnik Sensoren
- Naturwissenschaften Mathematik reine Mathematik Geometrie
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Daten nicht verfügbar
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
47803 Krefeld
Deutschland
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.