Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch de
CORDIS - Forschungsergebnisse der EU
CORDIS
Inhalt archiviert am 2022-12-27

PROCESS WASTE HEAT RECOVERY USING AN ORC CYCLE

Ziel

To demonstrate that an economic energy saving of about 2400 TOE/Y can be achieved in a chemical industry by recovering low temperature heat by an "ORC" group.
Description : Sensible heat of light oils from a distrillation column, earlier dissipated, is now recovered in an organic Rankine Cycle (ORC) unit, 1 MWE net output.
Innovative aspects : Use of isopentane as working fluid - longterm testing - behaviour of an ORC group within an industrial plant.

An Organic Rankine Cycle is used to recover sensible heat from reduced crude and heavy gasoil (HGO) streams in the bottom of an oil refinery crude distillation tower to pre-heat and vaporize isopentane (working fluid). This is expanded isentropically through a turboexpander driving an electrical generator. Expanded isopentane is condensed by means of the refinery cooling water (CW) and pumped back into the loop by means of a centrifugal pump for further heat recovery. Electricity thus generated is to be exported to the National Grid.
Several working fluids have been considered but the choice circled on isopentane because : - It was readily available in the refinery, saving on import and storage costs for the initial start-up and routine makeup's.
- It had a saturation pressure at prevailing CW temperatures above the atmospheric pressure, thus avoiding complicated sealing arrangements to prevent air inleakage in the system.
- It has a reasonable low operating pressure (5 barg), consequently avoiding greater piping and equipment wall thickness.
Current refinery throuroughputs are such that it will allow a continuous electrical recovery of at least 1 MW from hot streams at 150 deg. C whose heat content are being dissipated to atmosphere through forced air cooling.
The network of shell-tube heat exchangers includes one preheater plus four vaporizers in which shellside are associated in 2 parallel arrangements. They are vertical floating head type with one pass and expansion below.
A disengagement drum is required because tubeside thermosyphon contains a liquid with +/- 25 % vaporization.
The surge drum will be a cylindrical horizontal drum with a 2:1 ellipsoide heads with a working capacity of 30 m3.
The control phylosophy being envisaged is that of maintaining a constant inlet pressure to the turboexpander, but permit the turbine outlet pressure to go as low as possible, depending on the CW temperature. Thus a number of process paameters will vary as temprature of the CW varies-isopentane flow, power output and heat demand. Calculations show however that the impact of the CW temperature change is almost entirely absorbed in the pre-heater. Therefore no significant change will be required either on the long residue or HGO outlet temperature control.

Wissenschaftliches Gebiet (EuroSciVoc)

CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.

Dieses Projekt wurde noch nicht bei EuroSciVoc klassifiziert.
Schlagen Sie die Wissenschaftsbereiche vor, die Ihrer Einschätzung nach besonders relevant sind, und helfen Sie uns, unseren Klassifizierungsdienst zu verbessern.

Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen

Programm/Programme

Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.

Thema/Themen

Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.

Aufforderung zur Vorschlagseinreichung

Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.

Daten nicht verfügbar

Finanzierungsplan

Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.

DEM - Demonstration contracts

Koordinator

COMPANHIA PORTUGUESA DE SERVICOS SA (PARTEX)
EU-Beitrag
Keine Daten
Adresse
AVENIDA 5 DE OUTUBRO 160
1000 Lisboa
Portugal

Auf der Karte ansehen

Gesamtkosten

Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.

Keine Daten
Mein Booklet 0 0