Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS
Contenuto archiviato il 2022-12-27

PRODUCTION OF POWER AND HEAT BY THE GASIFICATION OF BARK

Obiettivo

Using a double stage gasifier (Michel Kim system) to use locally produced wood waste for gas production. The gas is subsequently used as the source of fuel for 4 Otto gas engines having a total generating capacity of 500 Kw.el.
The Michel Kim gasifier has worked since autumn 1984: many problems have been solved, but the gas production has never been enough for feeding the four gas engines. With a wood waste containing up to 160% moisture, about 580 m3 gas were produced, enough to generate 170 - 250 kWh of electricity. It was impossible to generate any more electricity with the gasifier. It would have taken two gasifiers to attain the 450 kWhe which the sawmill needed.
The results obtained clearly show that technical improvements are still necessary in order to run in optimal conditions. Economically the process is not viable with the present energy prices. After more than one year of attempts to improve process efficiency, the project has been stopped.
Gasification of bark is performed in a Michel Kim gasification system of +/- 500 kW el. capacity, working in concurrent flow.
The system consist of a two-stage gasifier made by Spama of Berlin. The primary gasification stage partially gasifies pre-dried wood waste to produce an intermediate product (coke) at around 600 deg. C.
The air in the gasifier is preheated with waste heat.
The secondary stage consists of a coke bed at 950 deg. C. fired by pure air which converts the tars and residual heavy hydrocarbons into combustible gas.
The gas then passes through a washer and a cooler. Waste heat from the cooler is used to pre-dry the gasification material. Four Otto gas engines (M.A.N.) each with a capacity of 125 kW el., have been installed. The entire unit is automatic and operates unmanned.
Heat produced is used for:
- the timber drying halls
- the work rooms
- the office and accommodations
- the storage heaters.

Campo scientifico (EuroSciVoc)

CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.

Questo progetto non è ancora stato classificato con EuroSciVoc.
Suggerisci i campi scientifici che ritieni più rilevanti e aiutaci a migliorare il nostro servizio di classificazione.

È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione

Programma(i)

Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.

Argomento(i)

Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.

Invito a presentare proposte

Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.

Dati non disponibili

Meccanismo di finanziamento

Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.

DEM - Demonstration contracts

Coordinatore

FRIEDRICH WAHL GMBH HOLZWERK
Contributo UE
Nessun dato
Indirizzo

7166 SULZBACH-LAUFEN
Germania

Mostra sulla mappa

Costo totale

I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.

Nessun dato
Il mio fascicolo 0 0