Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS
Contenuto archiviato il 2022-12-27

ENERGY RECOVERY IN A CATERING SCALE DISHWASHER BY MEANS OF A HEAT PUMP

Obiettivo

To design and install a heat pump capable of recovering heat from the vapour in a catering type dishwasher and to measure, for comparison, the performance and energy consumption of a conventional type dishwasher and the same dishwasher equipped with the heat pump. Energy savings of 45 to 50% were envisaged.
The heat pump system was monitored during 250 working days. Some failures occured (faults in water filling, heating rods destroyed and measurement failures). Annual energy savings were calculated at 2.5 operating hours per day with 35 172 KWh electric (42%) and 550 m3 in global water consumption. The capital payback period for a mass produced machine would be in the order of 6 years, but could be reduced to 3,5 years at a daily operating of 5 hours. Bonnet has not filed any patent. No immediate sale is considered in view of the relatively long capital payback periods. Further development is envisaged. Instead of an air-water heat pump a water-water heat pump is possible (water inlet temp. 55 deg C, outlet 85 deg C). Such a solution would no longer require an electric boiler for heating the rinsing water.
The heat pump system had to be dismantled because the customer did not want to keep it due to the lack of qualified staff.
The heat pump system consists of an evaporator placed at the outlet in the upper part of the machine, using as heat source the exhausted air-water mixture close to the point where it is produced, and two compressors and condensers under the machine. Two small hermetic maneurop type MT80 HT compressors (7.5 Kw unit power) where selected, with a view to low noise level, and the possible use of R12 in the condensing phase, at 75 C. The system includes two parallel running circuits, one to heat washing water, the other to preheat rinsing water. A maximum water temperature of 65 C can be reached by the heat pump, for the difference up to 85 C for rinsing an electrical boiler is foreseen.

Campo scientifico (EuroSciVoc)

CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.

Questo progetto non è ancora stato classificato con EuroSciVoc.
Suggerisci i campi scientifici che ritieni più rilevanti e aiutaci a migliorare il nostro servizio di classificazione.

È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione

Programma(i)

Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.

Argomento(i)

Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.

Invito a presentare proposte

Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.

Dati non disponibili

Meccanismo di finanziamento

Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.

DEM - Demonstration contracts

Coordinatore

ETS BONNET
Contributo UE
Nessun dato
Indirizzo
RUE GRENETTE 117 BP 422
69653 VILLEFRANCHE-SUR-SAONE
Francia

Mostra sulla mappa

Costo totale

I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.

Nessun dato
Il mio fascicolo 0 0