Obiettivo
TO DETERMINE THE THERMAL BEHAVIOUR OF NATURAL AND STIMULATED FRACTURES IN CRYSTALLINE ROCKS IN THE CONTEXT OF GEOTHERMAL HDR DEVELOPMENT.
In a joint German French hot dry rock (HDR) project at Soultz sous Forets the undisturbed temperature field was determined in the borehole GPK 1 in 3 oil wells in the surroundings. The virgin rock temperature is about 140 C at 2000 m depth. The measurements show that the temperature gradient decreases from 100 mK/m to 30 mK/m at about 1100 m depth. The decreasing temperature gradient can be explained by assuming a convective heat transfer in the Buntsandstein/Muschelkalk aquifer.
The results of a production test show that there is only 1 inflow zone in borehole GPK 1 at 1812 m depth. 3 injection tests, using different injection flow rates, were conducted in borehole GPK 1. A total number of about 20 water accepting joints could be detected by temperature measurements. A second major outflow at 1728 m depth was encountered besides the 1 at 1812 m depth. About 47% of the injected water was lost at 1728 m depth and about 53% at 1812 m depth.
The high resolution temperature measurements showed definitely which joints are water accepting (partly dependent on pressure) and which are not.
The European Geothermal Project involved teams from France and Germany who collaborated to test a site in the Upper Rhine Valley for its suitability for terrestrial heat mining (hot dry rock (HDR) energy production). Some British scientists participated in specific tasks.
The site was chosen near Soulz-sous-Forets in Alsace at the location of the old oil field of Pechelbronn which was the first oil field field exploited in Europe since the 18th century.
It is situated on 1 of the summits of a very large thermic anomaly (200 km long and 20 km wide) where the mean geothermal gradient between the surface and 1500 m is known to be higher than 6.5 C/100 m. The programme began in July 1987 with a 2000 m deep borehole.
Below at 1375 m thick sediment cover, the granitic basement was penetrated to a depth of 2000 m. The temperature at the bottom of the hole was 140 C. The geothermal gradient within the sediments was unusually high (10 C per 100 m) and diminished to a normal after a series of fractures inside the Bundsandstein producing some water at 116 C with a total salinity 98 g/l. At the depth of 1820 m, hydraulically active natural fissure was reached. The artesian outflow from this zone was 0.15 l/s, with well head pressure of 1.6 bars. The thermal water produced from the well had a high chloride contents and clearly had an identical origin with the fluid collected from the Buntsandstein just above the granite. During the water injection tests, a second active natural fissure was detected normally closed out but which seemed to aquire a noticeable permeability at a well head pressure of about 40 bars.
THE WORK FORMS PART OF THE FRANCO-GERMAN COLLABORATIVE HDR PROJECT (SEE ALSO CONTRACT NOS.G0052D G0055D, G0080D, G0082D AND G0072F). THE MAIN EXPERIMENTAL WORK WILL OCCUR AT SOULTZ, BUT OPPORTUNITIES MAY ALSO BE TAKEN TO WORK AT OTHER RELEVANT SITES IN FRANCE OR GERMANY.
THE WORK WILL INVOLVE THERMAL TESTING DURING HYDRAULIC EXPERIMENTS TO DETERMINE:
- IN SITU THERMAL CONDITIONS IN THE BOREHOLES;
- HEAT EXCHANGE EXPERIMENTS DURING FLUID CIRCULATION;
- THE IDENTIFICATION OF FRACTURES BY MEANS OF THERMAL DISTURBANCES IN THE BOREHOLE.
THIS WORK WILL BE SUPPORTED BY MODEL CALCULATIONS, WORKING WITH TEAMS FROM UK (SEE CONTRACT NO.G0003UK) AND SWITZERLAND.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
Questo progetto non è ancora stato classificato con EuroSciVoc.
Suggerisci i campi scientifici che ritieni più rilevanti e aiutaci a migliorare il nostro servizio di classificazione.
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Dati non disponibili
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
30161 Hannover
Germania
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.