Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS
Contenuto archiviato il 2024-04-15

A PHOTOVOLTAIC PUMPING SCHEME FOR A ADVANCED SOLAR HEATED DOMESTIC HOT WATER SYSTEM

Obiettivo


Work has been carried out in order to incorporate a photovoltaic motor pump set within an existing solar water heating scheme. The match between a high performance direct current motor pump, the photovoltaic array and the solar water heating scheme has been investigated and the performance of the system has been monitored.

2 different types of direct current motor were tested, a printed armature permanent magnet motor of lightweight construction and a standard direct current permanent magnet motor of heavy duty construction. There was a performance advantage to using the heavy duty motor which also suffered less in the humid conditions of the preheat tank room. The increased performance of the heavy duty motor was attributed to its greater inertia which made it more closely matched to the temperature inertia of the evacuated tube array.

The principle of the photovoltaic powered pump to save power and provide independence from mains power supplies proved easy to implement. The best overall option for cost and performance was a combination of a standard motor and a cheap moulded plastic pump.

A photovoltaic pumping system for advanced solar heating of domestic hot water has been monitored.
The evacuated tube array revealed a greater than expected number of vacuum failures. Calculations, based on a comparison of manufacturer's data with temperature and flow data, reveal that the array performance is reduced by around 61%.
Inspection of the printed armature motor showed brush wear consistent with nonarduous duty, although some armature wear had occurred and some corrosion of end plates and bearings was detected. Data was also collected for a heavy duty motor pump combination and a direct relationship can be shown between the motor speed and the array flow and the insolation level.

Campo scientifico (EuroSciVoc)

CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.

Questo progetto non è ancora stato classificato con EuroSciVoc.
Suggerisci i campi scientifici che ritieni più rilevanti e aiutaci a migliorare il nostro servizio di classificazione.

È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione

Programma(i)

Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.

Argomento(i)

Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.

Dati non disponibili

Invito a presentare proposte

Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.

Dati non disponibili

Meccanismo di finanziamento

Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.

CSC - Cost-sharing contracts

Coordinatore

GEC Marconi Ltd
Contributo UE
Nessun dato
Indirizzo
Elstree Way
WD6 1RX Borehamwood
Regno Unito

Mostra sulla mappa

Costo totale

I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.

Nessun dato
Il mio fascicolo 0 0