Ziel
Objectives and Problems to be Solved:
The objectives of the project are to develop an innovative multiple fuel combustor for small-scale gas turbines, suitable for operating at high temperatures while maintaining low NOx levels. Operating conditions with turbine inlet temperatures above 1600K (and 15 bars) are required to boost the thermal efficiency above the value of 35%. A similar concept could be extended to larger gas turbines in combined cycle to exceed efficient energy conversion of 60%. Another objective is to improve the internal reactive aerodynamics in order to obtain more uniform wall temperatures for lower thermal stresses, and lower values of the exhaust gases pattern factor for more circumferential uniformity at the combustor exit. Both parameters are crucial for increased reliability and availability of the turbine. The aim of the project is also to gain advanced engineering expertise in combustion, including modelling of combustion chemistry and aerodynamics, wall cooling and high momentum fuel stream injection. Finally the project should prove the performance of a pilot flameless oxidation combustor. Description of Work: The work is equally divided between theoretical studies and experimental tests. It starts with basic studies required to improve the understanding of turbulence-combustion coupling and utilises well-defined and controlled laboratory experiments. Basic studies are also to be performed on an innovative fuel atomisation method that will serve as the momentum accelerator for the main vortex, which has a major role in the new combustor operation, while maintaining circumferential uniformity. Additional investigations will be conducted to develop wall-cooling methods where the jets are optimised for maximising the effect of vortex momentum augmentation and wall temperature reduction and unification. Wall cooling and fuel injection effects on the vortex characteristics will be quantitatively visualised using Particle Image Velocimetry. The results of these investigations will be integrated within Computational Fluid Dynamics (CFD) codes capable of predicting the complete combustor performance. These predictions will be used to optimise the combustor geometry for minimum emission and maximum combustion stability and uniform wall temperatures and circumferential distribution of exhaust gas temperature profiles. A combustor sector will be produced for detailed point measurements of velocities, temperatures and species concentration under reactive and pressurised conditions. These will be used for further adjustments of the different models and for comparison with the CFD predictions. A complete combustor prototype will be produced and tested under realistic pressure and temperature conditions. It will serve for global performance measurements such as combustion efficiency, stability, emission, and uniformity of the exhaust gases and wall temperatures. Expected Results and Exploitation Plans: The expected results include a novel computational model for accurate combustor design; innovative technologies for wall cooling and fuel injection; a validated full-scale clean pilot combustor with high temperature capability. These results may be itemised as follows: improved combustion engineering methods and advanced design tools; improved availability and reliability of the combustor obtained through lower pattern factor and thermal stresses; proven technology for high efficiency small gas turbines (>35% in open cycle) and low-NOx (<20 ppmv). A continuation of the project for the design of a new GT based on the FLOXCOM technology would be suggested. Preliminary contacts are already being made with different industries within the EC to establish a new consortium for the exploitation of this new technology. The target market is the small GT industry (200-1000 KW range), most probably for decentralised power generation.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Naturwissenschaften Chemiewissenschaften Elektrochemie Elektrolyse
- Naturwissenschaften Naturwissenschaften klassische Mechanik Strömungsmechanik Fluiddynamik numerische Strömungsmechanik
- Naturwissenschaften Mathematik reine Mathematik Geometrie
- Technik und Technologie Maschinenbau Fahrzeugbau Luft- und Raumfahrttechnik Luftfahrttechnik
- Technik und Technologie Umwelttechnik Energie und Kraftstoffe Energieumwandlung
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
32000 HAIFA
Israel
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.