Ziel
Objectives and problems to be solved: This project addresses the performance of wells in hydrocarbon reservoirs. The productivity of an oil or gas well determines the efficiency of extracting fluids from the subsurface formations, and hence the well performance has a direct and immediate impact on economic returns from a reservoir asset. Hydrocarbon delivery, or drive fluid injection, can be reduced to far below its potential by loss of effective permeability in a near-well bore zone (termed formation damage) or by obstructions to flow in the well completion assembly. This reduction can be provoked by inappropriate decisions or activities related to the selection of well fluids or completion solutions, the implementation of the same, or unprepared ness for incompatibilities between system components. WP-2002 aims to deliver petroleum engineering development strategies and products to drill, complete and maintain well bores in such a manner that the optimum delivery potential of a hydrocarbon reservoir is protected and maintained throughout its entire economic life. Description of work: The WP-2002 project explores and delivers new strategies and products for petroleum engineers and specifically well fluid engineers. It is being performed by a consortium of 5 companies, and exploits the multidisciplinary knowledge available in teams of engineers, chemists and petrophysicists. The objectives are approached by laboratory experiments and analyses as well as development of supportive software to simulate down hole and near well bore reservoir processes affected by the physic chemistry of well fluids. The project contains six inter-related work packages, each with a specific objective and managed by the most appropriate consortium member. The first work package (developing unified lab test protocols) aims to develop cost effective laboratory formation damage diagnostic methods, which will be made available to the industry. Work packages 2 and 3 (polymer-induced damage and damage from emulsion-based fluids) will increase the knowledge base by systematic applied research into well fluid design. Packages 4 and 5 (low-damaging fluid systems and well clean-up) are focused on developing field products and processes to maximize well productivity. All these work packages contribute to package 6 (developing a well productivity simulator), which aims to develop a prototype simulation tool able to transfer laboratory results to field performance and aid well planning. Expected results and exploitation plans: The deliverables include well planners' guidelines for the selection of drilling, completion and other well treatment fluids taking into consideration the short and long term effects of the systems of choice. The guidelines will concentrate the individual work package findings and provide: improved knowledge on formation damage mechanisms; unified laboratory practices to simulate and analyse formation damage; modified, formation-protective fluid additives and fluid systems; novel, improved well clean-up procedures; and a new simulation tool for well productivity. Dissemination of WP-2002 results throughout the European oil and the joint efforts and interests of the partners, including application workshops and publication at technical conferences, will secure gas industry. If the project is successful, it will make significant contributions towards the Key Action and Frame Programme goals. Further spin-offs will be generated reducing the risk in marginal field developments and the environmental impact of field developments at large.
The actual outcome of the project answering the following key questions:
-How the formation potential for a given well fluid can be quantified before it is put in the ground;
-What polymers are really needed for a specific use and how to select them for a given reservoir;
-How an oil-based mud can damage an oil reservoir, when it contain largely the same fluid that is already there;
-Whether one can extrapolate the expected performance of an emulsion-based fluid to the next reservoir;
-Which suppliers in a supplier's palette to apply for a given critical field;
-What is the best procedure to put the recently completed wells on production/injection. The logical culmination of the project are prototype simulation tools for estimation, selection and decisions assistance specifically on well productivity.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Naturwissenschaften Chemiewissenschaften organische Chemie Kohlenwasserstoff
- Technik und Technologie Umwelttechnik Energie und Kraftstoffe fossile Energie Erdöl
- Naturwissenschaften Chemiewissenschaften Polymerwissenschaft
- Sozialwissenschaften Wirtschaftswissenschaften Wirtschaftswissenschaft Produktionswirtschaft Produktivität
- Naturwissenschaften Informatik und Informationswissenschaften Software Anwendungssoftware Simulationssoftware
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
4091 STAVANGER
Norwegen
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.