Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch Deutsch
CORDIS - Forschungsergebnisse der EU
CORDIS
Inhalt archiviert am 2024-05-24

Ultra high power valve regulated lead-acid (vrla) batteries for ups applications (uhp vrla battery)

Ziel

Objectives and problems to be solved:
The objective of this project is to develop a small Valve Regulated Lead-acid (VRLA) battery with very high power density (>1500 W/dm3), high specific power (>600 W/kg) and higher reliability for UPS applications. Nowadays UPS manufacturers demand batteries with very high specific power and relatively low specific energy, because most of main failures can be defined as "micro-failures", usually of the order of seconds. Due to this fact, it is not necessary to provide energy but power. The aim of this project is therefore to develop a new battery with weight and volume substantially reduced, as well as a substantial improvement in its reliability. These aspects can provide the achievement of a more efficient, safe and economic energy supply.
Description of work:
Battery specific power is practically related to electrode area, then its increase appears essential to achieve the project objective. Within this project, the use of new materials that are now being developed, and that would allow a substantial electrode thickness reduction, from about 1 mm (present values) to around 0.5 mm, are studied. In this way, very thin lead strips of about 0.35 mm thickness are under testing with a proper grid alloy to decrease electrode corrosion and thus to avoid a reduction of the battery life. Furthermore, it is necessary to achieve a similar reduction in the conventional glass micro-fibre separator, resulting in a total thickness of around 0.4 mm. But such thin material makes the battery more prone to develop short circuits across the separator. In order to avoid this problem, a new micro-porous polyethylene membrane is tested, due to its promising mechanical properties, high porosity and low pore size. For these reasons, the final separator configuration includes a combination of both materials, improved glass micro-fibre non-woven and the polyethylene membrane. Batteries are designed and assembled by S.E. Acumulador Tudor S.A. as battery manufacturer and tested in real conditions by MGE UPS Systems as end user. The separator manufacturers, DARAMIC for the membrane and Bernard Dumas for the glass micro-fibre mat, develop and supply the adequate materials in order to improve its mechanical resistance and conductivity; while the Inorganic Chemistry Department of Córdoba University carries out the fundamental studies on very thin electrodes.
Expected results and exploitation plans: It is expected that the new high power VRLA batteries designed would reach the following minimum performances:
- Specific power > 600 W/kg (20C discharge at 70% SOC)
- Power density > 1500 W/dm3- Life on float: 3-5 years
- Cycle life > 600 cycles at 60% DOD (IEC 896-2)
- Cost < 100 Euro/kWh.
The battery under development is mainly focused to UPS market, in order to be able to use such equipment in portable applications as well as in telecommunication cabinets. The improved performance of this new battery has also application in 42 V automotive systems.

Wissenschaftliches Gebiet (EuroSciVoc)

CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.

Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen

Programm/Programme

Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.

Thema/Themen

Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.

Aufforderung zur Vorschlagseinreichung

Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.

Daten nicht verfügbar

Finanzierungsplan

Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.

CSC - Cost-sharing contracts

Koordinator

SEA TUDOR - SOCIEDAD ESPANOLA DEL ACUMULADOR S.A.
EU-Beitrag
Keine Daten
Adresse
2,Carretera Nacional II, KM 42
19200 AZUQUECA DE HENARES
Spanien

Auf der Karte ansehen

Gesamtkosten

Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.

Keine Daten

Beteiligte (4)

Mein Booklet 0 0