Ziel
To demonstrate the viability of a novel carbon adsorption process for the recovery of these materials.
A programme has been initiated to demonstrate the viability of a novel carbon adsorption process for the recovery of water soluble organic component from effluent process waters. Environmental benefits include less organic pollution, lower carbon dioxide emission and lower water demands. The programme considered:
development of a novel immiscible solvent regeneration process to overcome the limitations of conventional techniques;
development of improved carbon adsorbents to maximise the adsorption capacity and the regeneration efficiency;
development of a detailed understanding of the factors influencing the adsorption and regeneration of active carbons, and the generation of a database of adsorption isotherms to allow the prediction of multicomponent adsorption for use in the design of the full scale process. A viable process had to produce an essentially anhydrous stream which could then be returned to the product stream. An improved process for ethanol production had been developed which involved the following steps:
alcohol adsorption on the first bed yielding clean exit water;
bed flushing with anhydrous alcohol;
alcohol displacement, using for instance acetone;
displacement of the acetone using clean water.
Preliminary studies within the programme have now shown that this can be simplified considerably, and extended to lower feed concentrations, for the treatment of aqueous effluents. The replacement of a miscible displacer by an immiscible one removes the requirement for step 2 and eliminates the need for distillation in the final step. In addition to the use of the immiscible solvent, it has also been shown that the overall efficiency of the adsorption plus regeneration steps is strongly dependent on the carbon used in the process. The best results to date have been achieved using a polymer derived carbon.
The process can be split into three steps :
1. Adsorption
In this step the water containing around 1 % volume of mixed aqueous acids is passed up the first of the three columns. For a feed containing acetic and formic acids two adsorption fronts will pass through the column with formic acid arriving at the column exist first. When a certain acid breakthrough level is reached the adsorption stage will be stopped. The key parameters in this stage of process will be the carbon adsorption capacity, which will be a function of both the micropore volume and mean pore size, and the adsorption temperature. Small scale laboratory studies using both equilibrium adsorption and small scale column breakthrough tests will be used to optimise the main carbon preparation parameters (extent of activation) and the adsorption temperature.
2. Solvent Displacement
The key to the process is the immiscible solvent displacement step. Normal carbon adsorption processes omit this step and proceed directly to steam regeneration. Where the concentration of the adsorbed species on the carbon is high this can be quite efficient and will give a higher organics content in the condensed steam effluent than in the original contaminated water feed to the adsorption step. In the case of the water soluble organics the concentration on the carbon is relatively low and steam regeneration would regenerate an aqueous phase at a very similar concentration to the original aqueous effluent feed to the adsorption step.
3. Steam Regeneration
At this stage of the process the carbon bed is saturated with di-isopropyl ether. This must now be removed and the bed returned to a water saturated state ready for the next acid adsorption stage. Preliminary studies have shown that this stage can be achieved with steam although under laboratory test conditions this is not very efficient due to poor heat transfer in the small beds. Hot dry gas regeneration may also be an alternative although this has not been investigated and may be worthy of further consideration if steam proves impractical. This stage of the process can only be realistically tested in the pilot scale. The work will therefore be carried out using commercial active carbons during the pilot unit commissioning phase.
It will be necessary to show that the bed can be regenerated sufficiently for continuous recycle operation to be viable whilst using low or medium pressure steam with a total volumetric flow of not more than ca.4 bed volumes of water as steam.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Naturwissenschaften Chemiewissenschaften organische Chemie organische Säure
- Naturwissenschaften Chemiewissenschaften Polymerwissenschaft
- Naturwissenschaften Geowissenschaften und verwandte Umweltwissenschaften Umweltwissenschaft Umweltbelastung
- Technik und Technologie Chemieingenieurwesen Trenntechnik Destillation
- Naturwissenschaften Chemiewissenschaften organische Chemie Alkohole
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Wir bitten um Entschuldigung ... während der Ausführung ist ein unerwarteter Fehler aufgetreten.
Sie müssen sich authentifizieren. Ihre Sitzung ist möglicherweise abgelaufen.
Vielen Dank für Ihr Feedback. Sie erhalten in Kürze eine E-Mail zur Übermittlungsbestätigung. Wenn Sie sich für eine Benachrichtigung über den Berichtsstatus entschieden haben, werden Sie auch im Falle einer Änderung des Berichtsstatus benachrichtigt.
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
HU12 8DS Hull
Vereinigtes Königreich
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.