Ziel
Food packaging regulations in Europe require that the packaging materials must n ot cause mass transfer (migration) of harmful substances to the food. Considerab le scientific progress has been made in understanding and modelling the transfer of adventitious hazardous substances from recycled plastics into foodstuffs. Mo st of this knowledge has been elaborated within the recently finished EU project AIR-CT931014. One of the main conclusions of this project was that PET as a low diffusivity plastic and is the most promising polymer for reuse as a food packa ging material. Nevertheless, the practical translation of this progress into inn ovative industrial solutions is still awaited. One of the reasons has typical 'E uropean' character and can be substantiated by the fact that the European legal requirements in this respect are not yet clearly and uniformly defined. As a con sequence, economic and generally recognized test methods are not available so fa r. With respect to PET, there is clearly an obvious reason for the industrial he sitation in launching advanced food packaging applications. In the whole chain o f knowledge on diffusion and migration into and out of PET - which allows for in stance to correlate a known initial concentration in the plastic with the result ing time-dependent concentration in a foodstuff - there remains one missing link : This is the still open but highly important question of the nature and concent ration of actual contaminants found in re-collected PET. Filling up this gap wit h analytical data relevant for the whole of Europe, and then linking this statis tical picture with the available knowledge on PET diffusion behaviour, would ena ble to draw scientifically sound and convincing conclusions about the safety of reusing PET. With respect to recovered paper and board as food packaging materia ls, the situation is practically the reverse of that described for plastics abov e. Considerable work has focussed on the compositional analysis of virgin and re cycled fibres to identify contaminants which could potentially be harmful to the consumer. However, little systematic work has been focused on the interactions of such substances between paper/board fibres and foodstuffs, and taking also po lymeric coatings and plastic layers on paper and board into account. Again, as w ith the PET situation, there is a missing link in the chain of knowledge about t he migration from cellulosic fibres which needs to be made to achieve analogous goals as mentioned above for recycled PET and to enter new pathways in the enorm ous food packaging market of paper and board. This topic gains automatically eve n more importance since it is the clear intention of the European Commission ser vices, now nearing completion of food contact plastics regulations, to bring als o paper and board within the scope of specific European regulations on food cont act materials.
The objectives of the project are
(i) to facilitate indust rial innovation and to harmonise legislative enforcement of new environmental pa ckaging requirements stemming from the Directive 94/62/EEC on packaging and pack aging waste, by
(ii): Drawing up a statistical overview of the nature and exte nt of contaminants in PET recovered from the food packaging market, in order to establish an evaluation platform for the quality and safety-in-use of recycled P ET plastics for food packaging and
(ii) Generating a scientific understanding of the physico-chemical behaviour of chemical contaminants on paper and board fi bres as a basis for safety evaluation and definition of criteria for the appropr iate reuse of recycled fibres for food packaging.
The aim of the project is to overcome the current hesitation and inhibitions to innovation felt by many S ME companies who want to produce new and environmentally-friendly food packaging but who cannot operate in an uncertain legislative framework. Simultaneously pr actical recommendations and guidance to the Commission for appropriate legislati on on recycled materials will be offered.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Naturwissenschaften Chemiewissenschaften Polymerwissenschaft
- Technik und Technologie Sonstige Technik und Technologie Lebensmitteltechnologie Lebensmittelsicherheit
- Technik und Technologie Werkstofftechnik Beschichtung
- Technik und Technologie Sonstige Technik und Technologie Lebensmitteltechnologie Lebensmittelverpackung
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
85354 Freising
Deutschland
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.