Obiettivo
THIS RESEARCH IS BASED ON THE RESULTS AND EXPERIENCE OF WORK CARRIED OUT AT SIEMPELKAMP IN THE FRAMEWORK OF THE FIRST FIVE-YEAR (1979-83) PROGRAMME (REF. : EUR 10021). THE PRECEDING RESEARCH WORK PROVED THAT IT IS POSSIBLE TO MELT DOWN CONTAMINATED SCRAP BY MEANS OF A MODIFIED INDUSTRIAL FURNACE DEVICE IN COMPLIANCE WITH THE LEGAL LIMITS AND REGULATIONS.
THIS RESEARCH WORK, THEREFORE, AIMS MAINLY AT THE BEHAVIOUR OF RADIONUCLIDES DURING THE MELTING PROCEDURE, WITH REGARD TO VARIOUS MATERIAL QUALITIES AND THE HARMLESS RECYCLING OF MELTED-DOWN METAL PARTS COMING FROM REFURBISHING AND DECOMMISSIONING OF NUCLEAR INSTALLATIONS.
To date, approximately 3500 tonnes of very low level contaminated steel components from the refurbishing and dismantling of various nuclear installations in Germany have been treated by melting. 95% of the radioactivity was due to cobalt-60 and caesium-137 with an average ratio of 60:40. After melting, caesium was found in the slag and filter dust, whereas cobalt-60 mainly remained in the ingot (90-99%).
A special melting facility has been constructed to treat components which have been contaminated up to a level of 200 Bq/g in a controlled area. Approximately 2000 tonnes of steel components have been melted, so far, in this facility and to a large extent it has been recycled for nuclear purposes such as for transport and disposal containers and biological shieldings.
One of the most important problems was to quantify the amount of secondary waste produced during melting (eg slag, filterdust).
Melting of radioactive waste metal from the dismantling or refurbishing of nuclear installations has been assessed with respect to recycling (eg type A and type B containers for transport and/or final disposal, and shieldings). Long term tests showed that the radiation exposure of workers and the environment can easily be maintained below the admissible limits. The radioactivity distribution within the melt product is homogeneous and its activity can be measured precisely. Steel, copper, brass and graphite were treated.
In the melted copper, it was possible to meet the limits for unrestricted reuse, whereas for brass the limit for conditional industrial reuse was attained. Radioactive carbon can only be bound in cast iron as small graphite lamellas or nodules and has therefore to be crushed prior to adding to the melt.
B.1. PLANNING AND DESIGN OF THE MELT DEVICE TAKING INTO ACCOUNT AN EXISTING FURNACE.
B.2. CONSTRUCTION OF THE NEEDED MELT DEVICE COMPONENTS.
B.3. MELT WORK USING AS SCRAP CONTAMINATED CARBON STEEL, STAINLESS STEEL AND ITS MIXTURE.
B.4. EVALUATION OF MELT RESULTS.
B.5. TECHNICAL, ECONOMICAL AND RADIOLOGICAL CONSEQUENCES.
B.6. EXTRAPOLATION ECONOMICAL AND RADIOLOGICAL CONSEQUENCES.TO LARGE NUCLEAR POWER PLANT AND COMPARISON WITH ALTERNATIVE MODES WITH A VIEW TO THE ECONOMICAL AND ENVIRONMENTAL ASPECTS.
B.7. MELTING OF CONTAMINATED GALVANISED SHEET MATERIAL.
B.8. MELTING OF NON-FERROUS METAL (E.G. COPPER AND BRASS) TO INVESTIGATE THE BEHAVIOUR OF RELEVANT RADIONUCLIDES (E.G. CO-60, CS-137) DURING THE MELTING PROCESS.
B.9. INVESTIGATION ON ADDING RADIOACTIVE CARBON TO THE STEEL MELT PROCESS TO OBTAIN CAST IRON OF SUITABLE QUALITY FOR E.G. DISPOSAL CONTAINERS.
B.10. INVESTIGATION ON THE LONG-TERM BEHAVIOUR OF THE FURNACE LINER, THE CHARGING DEVICE AND THE FILTER SYSTEM AFTER MELTING OF ABOUT 500 T OF CONTAMINED STEEL WASTE (OVER TWO YEARS) WITH PARTICULAR VIEW TO ACTIVITY CONCENTRATION IN THE DIFFERENT PARTS OF THE MELTING PLANT.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia altre ingegnerie e tecnologie ingegneria nucleare gestione dei rifiuti radioattivi
- ingegneria e tecnologia ingegneria ambientale gestione dei rifiuti processi di trattamento dei rifiuti riciclaggio
- scienze naturali scienze chimiche chimica nucleare chimica delle radiazioni
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Dati non disponibili
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
47803 Krefeld
Germania
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.